| Message ID | 20200213025930.27943-2-jaedon.shin@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PCI: brcmstb: Add Broadcom STB support | expand |
On 2/12/2020 6:59 PM, Jaedon Shin wrote: > Add PCIe support for ARM-based Broadcom STB SoCs. > > Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> > --- > Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 8 +++++++- > drivers/pci/controller/Kconfig | 2 +- > drivers/pci/controller/pcie-brcmstb.c | 1 + > 3 files changed, 9 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > index 77d3e81a437b..fb1a78606f78 100644 > --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > @@ -14,7 +14,13 @@ allOf: > > properties: > compatible: > - const: brcm,bcm2711-pcie # The Raspberry Pi 4 > + oneOf: > + - description: > + BCM2711 based Boards > + const: brcm,bcm2711-pcie > + - description: > + ARM-based BCM7XXX Broadcom STB Boards > + const: brcm,bcm7445-pcie You would also need to document the regulator properties as optional here. > > reg: > maxItems: 1 > diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig > index 20bf00f587bd..c60a27cff81a 100644 > --- a/drivers/pci/controller/Kconfig > +++ b/drivers/pci/controller/Kconfig > @@ -254,7 +254,7 @@ config VMD > > config PCIE_BRCMSTB > tristate "Broadcom Brcmstb PCIe host controller" > - depends on ARCH_BCM2835 || COMPILE_TEST > + depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST This part looks entirely reasonable.
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index 77d3e81a437b..fb1a78606f78 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -14,7 +14,13 @@ allOf: properties: compatible: - const: brcm,bcm2711-pcie # The Raspberry Pi 4 + oneOf: + - description: + BCM2711 based Boards + const: brcm,bcm2711-pcie + - description: + ARM-based BCM7XXX Broadcom STB Boards + const: brcm,bcm7445-pcie reg: maxItems: 1 diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 20bf00f587bd..c60a27cff81a 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -254,7 +254,7 @@ config VMD config PCIE_BRCMSTB tristate "Broadcom Brcmstb PCIe host controller" - depends on ARCH_BCM2835 || COMPILE_TEST + depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST depends on OF depends on PCI_MSI_IRQ_DOMAIN help diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index d20aabc26273..34581a6a7313 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -996,6 +996,7 @@ static int brcm_pcie_probe(struct platform_device *pdev) static const struct of_device_id brcm_pcie_match[] = { { .compatible = "brcm,bcm2711-pcie" }, + { .compatible = "brcm,bcm7445-pcie" }, {}, }; MODULE_DEVICE_TABLE(of, brcm_pcie_match);
Add PCIe support for ARM-based Broadcom STB SoCs. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> --- Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 8 +++++++- drivers/pci/controller/Kconfig | 2 +- drivers/pci/controller/pcie-brcmstb.c | 1 + 3 files changed, 9 insertions(+), 2 deletions(-)