diff mbox series

drm/pl111: Support Integrator IM-PD1 module

Message ID 20200213124833.35545-1-linus.walleij@linaro.org (mailing list archive)
State Mainlined
Commit 364e7d3058fc94fc9a158872a3c2e2a4605324db
Headers show
Series drm/pl111: Support Integrator IM-PD1 module | expand

Commit Message

Linus Walleij Feb. 13, 2020, 12:48 p.m. UTC
The last in-kernel user of the old framebuffer driver is the
IM-PD1 module for the Integrator/AP. Let's implement support for
this remaining user so we can migrate the last user over to
DRM and delete the old FB driver.

On the Integrator/AP the IM-PD1 system controller will exist
alongside the common Integrator system controller so make
sure to do a special lookup for the IM-PD1 syscon and make it
take precedence if found.

Tested on the Integrator/AP with the IM-PD1 mounted.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpu/drm/pl111/pl111_versatile.c | 73 +++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

Comments

Daniel Vetter Feb. 13, 2020, 2:48 p.m. UTC | #1
On Thu, Feb 13, 2020 at 1:48 PM Linus Walleij <linus.walleij@linaro.org> wrote:
> The last in-kernel user of the old framebuffer driver is the
> IM-PD1 module for the Integrator/AP. Let's implement support for
> this remaining user so we can migrate the last user over to
> DRM and delete the old FB driver.
>
> On the Integrator/AP the IM-PD1 system controller will exist
> alongside the common Integrator system controller so make
> sure to do a special lookup for the IM-PD1 syscon and make it
> take precedence if found.
>
> Tested on the Integrator/AP with the IM-PD1 mounted.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Looking around in the arm/mach-integrator code this seems to match
roughly :-) I noticed there's also two more outputs for two panels,
but not here. Do we not care about these anymore?

Anyway, lgtm. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

> ---
>  drivers/gpu/drm/pl111/pl111_versatile.c | 73 +++++++++++++++++++++++++
>  1 file changed, 73 insertions(+)
>
> diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c
> index 09aeaffb7660..4f325c410b5d 100644
> --- a/drivers/gpu/drm/pl111/pl111_versatile.c
> +++ b/drivers/gpu/drm/pl111/pl111_versatile.c
> @@ -19,6 +19,7 @@ static struct regmap *versatile_syscon_map;
>   * We detect the different syscon types from the compatible strings.
>   */
>  enum versatile_clcd {
> +       INTEGRATOR_IMPD1,
>         INTEGRATOR_CLCD_CM,
>         VERSATILE_CLCD,
>         REALVIEW_CLCD_EB,
> @@ -65,6 +66,14 @@ static const struct of_device_id versatile_clcd_of_match[] = {
>         {},
>  };
>
> +static const struct of_device_id impd1_clcd_of_match[] = {
> +       {
> +               .compatible = "arm,im-pd1-syscon",
> +               .data = (void *)INTEGRATOR_IMPD1,
> +       },
> +       {},
> +};
> +
>  /*
>   * Core module CLCD control on the Integrator/CP, bits
>   * 8 thru 19 of the CM_CONTROL register controls a bunch
> @@ -125,6 +134,36 @@ static void pl111_integrator_enable(struct drm_device *drm, u32 format)
>                            val);
>  }
>
> +#define IMPD1_CTRL_OFFSET      0x18
> +#define IMPD1_CTRL_DISP_LCD    (0 << 0)
> +#define IMPD1_CTRL_DISP_VGA    (1 << 0)
> +#define IMPD1_CTRL_DISP_LCD1   (2 << 0)
> +#define IMPD1_CTRL_DISP_ENABLE (1 << 2)
> +#define IMPD1_CTRL_DISP_MASK   (7 << 0)
> +
> +static void pl111_impd1_enable(struct drm_device *drm, u32 format)
> +{
> +       u32 val;
> +
> +       dev_info(drm->dev, "enable IM-PD1 CLCD connectors\n");
> +       val = IMPD1_CTRL_DISP_VGA | IMPD1_CTRL_DISP_ENABLE;
> +
> +       regmap_update_bits(versatile_syscon_map,
> +                          IMPD1_CTRL_OFFSET,
> +                          IMPD1_CTRL_DISP_MASK,
> +                          val);
> +}
> +
> +static void pl111_impd1_disable(struct drm_device *drm)
> +{
> +       dev_info(drm->dev, "disable IM-PD1 CLCD connectors\n");
> +
> +       regmap_update_bits(versatile_syscon_map,
> +                          IMPD1_CTRL_OFFSET,
> +                          IMPD1_CTRL_DISP_MASK,
> +                          0);
> +}
> +
>  /*
>   * This configuration register in the Versatile and RealView
>   * family is uniformly present but appears more and more
> @@ -270,6 +309,20 @@ static const struct pl111_variant_data pl110_integrator = {
>         .fb_bpp = 16,
>  };
>
> +/*
> + * The IM-PD1 variant is a PL110 with a bunch of broken, or not
> + * yet implemented features
> + */
> +static const struct pl111_variant_data pl110_impd1 = {
> +       .name = "PL110 IM-PD1",
> +       .is_pl110 = true,
> +       .broken_clockdivider = true,
> +       .broken_vblank = true,
> +       .formats = pl110_integrator_pixel_formats,
> +       .nformats = ARRAY_SIZE(pl110_integrator_pixel_formats),
> +       .fb_bpp = 16,
> +};
> +
>  /*
>   * This is the in-between PL110 variant found in the ARM Versatile,
>   * supporting RGB565/BGR565
> @@ -322,8 +375,21 @@ int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
>                 /* Non-ARM reference designs, just bail out */
>                 return 0;
>         }
> +
>         versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
>
> +       /*
> +        * On the Integrator, check if we should use the IM-PD1 instead,
> +        * if we find it, it will take precedence. This is on the Integrator/AP
> +        * which only has this option for PL110 graphics.
> +        */
> +        if (versatile_clcd_type == INTEGRATOR_CLCD_CM) {
> +               np = of_find_matching_node_and_match(NULL, impd1_clcd_of_match,
> +                                                    &clcd_id);
> +               if (np)
> +                       versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
> +       }
> +
>         /* Versatile Express special handling */
>         if (versatile_clcd_type == VEXPRESS_CLCD_V2M) {
>                 struct platform_device *pdev;
> @@ -367,6 +433,13 @@ int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
>                 priv->variant_display_enable = pl111_integrator_enable;
>                 dev_info(dev, "set up callbacks for Integrator PL110\n");
>                 break;
> +       case INTEGRATOR_IMPD1:
> +               versatile_syscon_map = map;
> +               priv->variant = &pl110_impd1;
> +               priv->variant_display_enable = pl111_impd1_enable;
> +               priv->variant_display_disable = pl111_impd1_disable;
> +               dev_info(dev, "set up callbacks for IM-PD1 PL110\n");
> +               break;
>         case VERSATILE_CLCD:
>                 versatile_syscon_map = map;
>                 /* This can do RGB565 with external PLD */
> --
> 2.23.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel



--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
Linus Walleij Feb. 14, 2020, 8:19 a.m. UTC | #2
On Thu, Feb 13, 2020 at 3:49 PM Daniel Vetter <daniel@ffwll.ch> wrote:

> Looking around in the arm/mach-integrator code this seems to match
> roughly :-) I noticed there's also two more outputs for two panels,
> but not here. Do we not care about these anymore?

I actually have that hardware too (Integrator/PP2) and it is trivial to
support using the existing code, one can just define the panel in the
device tree. It might need some new define in panel-simple.c as
well.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c
index 09aeaffb7660..4f325c410b5d 100644
--- a/drivers/gpu/drm/pl111/pl111_versatile.c
+++ b/drivers/gpu/drm/pl111/pl111_versatile.c
@@ -19,6 +19,7 @@  static struct regmap *versatile_syscon_map;
  * We detect the different syscon types from the compatible strings.
  */
 enum versatile_clcd {
+	INTEGRATOR_IMPD1,
 	INTEGRATOR_CLCD_CM,
 	VERSATILE_CLCD,
 	REALVIEW_CLCD_EB,
@@ -65,6 +66,14 @@  static const struct of_device_id versatile_clcd_of_match[] = {
 	{},
 };
 
+static const struct of_device_id impd1_clcd_of_match[] = {
+	{
+		.compatible = "arm,im-pd1-syscon",
+		.data = (void *)INTEGRATOR_IMPD1,
+	},
+	{},
+};
+
 /*
  * Core module CLCD control on the Integrator/CP, bits
  * 8 thru 19 of the CM_CONTROL register controls a bunch
@@ -125,6 +134,36 @@  static void pl111_integrator_enable(struct drm_device *drm, u32 format)
 			   val);
 }
 
+#define IMPD1_CTRL_OFFSET	0x18
+#define IMPD1_CTRL_DISP_LCD	(0 << 0)
+#define IMPD1_CTRL_DISP_VGA	(1 << 0)
+#define IMPD1_CTRL_DISP_LCD1	(2 << 0)
+#define IMPD1_CTRL_DISP_ENABLE	(1 << 2)
+#define IMPD1_CTRL_DISP_MASK	(7 << 0)
+
+static void pl111_impd1_enable(struct drm_device *drm, u32 format)
+{
+	u32 val;
+
+	dev_info(drm->dev, "enable IM-PD1 CLCD connectors\n");
+	val = IMPD1_CTRL_DISP_VGA | IMPD1_CTRL_DISP_ENABLE;
+
+	regmap_update_bits(versatile_syscon_map,
+			   IMPD1_CTRL_OFFSET,
+			   IMPD1_CTRL_DISP_MASK,
+			   val);
+}
+
+static void pl111_impd1_disable(struct drm_device *drm)
+{
+	dev_info(drm->dev, "disable IM-PD1 CLCD connectors\n");
+
+	regmap_update_bits(versatile_syscon_map,
+			   IMPD1_CTRL_OFFSET,
+			   IMPD1_CTRL_DISP_MASK,
+			   0);
+}
+
 /*
  * This configuration register in the Versatile and RealView
  * family is uniformly present but appears more and more
@@ -270,6 +309,20 @@  static const struct pl111_variant_data pl110_integrator = {
 	.fb_bpp = 16,
 };
 
+/*
+ * The IM-PD1 variant is a PL110 with a bunch of broken, or not
+ * yet implemented features
+ */
+static const struct pl111_variant_data pl110_impd1 = {
+	.name = "PL110 IM-PD1",
+	.is_pl110 = true,
+	.broken_clockdivider = true,
+	.broken_vblank = true,
+	.formats = pl110_integrator_pixel_formats,
+	.nformats = ARRAY_SIZE(pl110_integrator_pixel_formats),
+	.fb_bpp = 16,
+};
+
 /*
  * This is the in-between PL110 variant found in the ARM Versatile,
  * supporting RGB565/BGR565
@@ -322,8 +375,21 @@  int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
 		/* Non-ARM reference designs, just bail out */
 		return 0;
 	}
+
 	versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
 
+	/*
+	 * On the Integrator, check if we should use the IM-PD1 instead,
+	 * if we find it, it will take precedence. This is on the Integrator/AP
+	 * which only has this option for PL110 graphics.
+	 */
+	 if (versatile_clcd_type == INTEGRATOR_CLCD_CM) {
+		np = of_find_matching_node_and_match(NULL, impd1_clcd_of_match,
+						     &clcd_id);
+		if (np)
+			versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
+	}
+
 	/* Versatile Express special handling */
 	if (versatile_clcd_type == VEXPRESS_CLCD_V2M) {
 		struct platform_device *pdev;
@@ -367,6 +433,13 @@  int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
 		priv->variant_display_enable = pl111_integrator_enable;
 		dev_info(dev, "set up callbacks for Integrator PL110\n");
 		break;
+	case INTEGRATOR_IMPD1:
+		versatile_syscon_map = map;
+		priv->variant = &pl110_impd1;
+		priv->variant_display_enable = pl111_impd1_enable;
+		priv->variant_display_disable = pl111_impd1_disable;
+		dev_info(dev, "set up callbacks for IM-PD1 PL110\n");
+		break;
 	case VERSATILE_CLCD:
 		versatile_syscon_map = map;
 		/* This can do RGB565 with external PLD */