diff mbox series

[PATCHv1,2/3] arm64: dts: meson: Add missing regulator linked to VCCV5 regulator to VDDIO_C/TF_IO

Message ID 20200216173446.1823-3-linux.amoon@gmail.com (mailing list archive)
State New, archived
Headers show
Series Odroid N2 failes to boot using upstream kernel using microSD card | expand

Commit Message

Anand Moon Feb. 16, 2020, 5:34 p.m. UTC
As per schematics add missing VCCV5 power supply to VDDIO_C/TF_IO
regulator. Also add TF_3V3N_1V8_EN signal name to gpio pin.

Fixes: c35f6dc5c377 (arm64: dts: meson: Add minimal support for Odroid-N2)
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 3 +++
 1 file changed, 3 insertions(+)

Comments

Jerome Brunet Feb. 17, 2020, 7:49 a.m. UTC | #1
On Sun 16 Feb 2020 at 18:34, Anand Moon <linux.amoon@gmail.com> wrote:

> As per schematics add missing VCCV5 power supply to VDDIO_C/TF_IO
> regulator. Also add TF_3V3N_1V8_EN signal name to gpio pin.

Why ? I don't see the connection with the cover letter here ...

>
> Fixes: c35f6dc5c377 (arm64: dts: meson: Add minimal support for Odroid-N2)
> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Cc: Jerome Brunet <jbrunet@baylibre.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> index 353db3b32cc4..23eddff85fe5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> @@ -66,11 +66,14 @@ tf_io: gpio-regulator-tf_io {
>  		regulator-min-microvolt = <1800000>;
>  		regulator-max-microvolt = <3300000>;
>  
> +		/* TF_3V3N_1V8_EN */
This is not terribly useful ... same for the previous patch

>  		gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
>  		gpios-states = <0>;
>  
>  		states = <3300000 0>,
>  			 <1800000 1>;
> +		/* U16 RT9179GB */
> +		vin-supply = <&vcc_5v>;
That is not parsed and not even part of the gpio regulator binding
documentation. It won't make any difference.

>  	};
>  
>  	flash_1v8: regulator-flash_1v8 {
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 353db3b32cc4..23eddff85fe5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -66,11 +66,14 @@  tf_io: gpio-regulator-tf_io {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
+		/* TF_3V3N_1V8_EN */
 		gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 		gpios-states = <0>;
 
 		states = <3300000 0>,
 			 <1800000 1>;
+		/* U16 RT9179GB */
+		vin-supply = <&vcc_5v>;
 	};
 
 	flash_1v8: regulator-flash_1v8 {