diff mbox series

[4/4] mmc: mmci: initialize pwr|clk|datactrl_reg with their hardware values

Message ID 20200226084014.5242-5-ludovic.barre@st.com (mailing list archive)
State New, archived
Headers show
Series mmc: mmci_sdmmc: fixes and improvements | expand

Commit Message

Ludovic BARRE Feb. 26, 2020, 8:40 a.m. UTC
In mmci_write_pwr|clk|datactrlreg functions, if the desired value
is equal to corresponding variable (pwr_reg|clk_reg|datactrl_reg),
the value is not written in the register.

At probe pwr|clk|datactrl_reg of mmci_host structure are initialized
to 0 (kzalloc of mmc_alloc_host). But they does not necessarily reflect
hardware value of these registers, if they are used while boot level.
This is problematic, if we want to write 0 in these registers.

This patch initializes pwr|clk|datactrl_reg variables with their
hardware values while probing.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 drivers/mmc/host/mmci.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 647567def612..f378ae18d5dc 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -2085,6 +2085,10 @@  static int mmci_probe(struct amba_device *dev,
 	else if (plat->ocr_mask)
 		dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
 
+	host->pwr_reg = readl_relaxed(host->base + MMCIPOWER);
+	host->clk_reg = readl_relaxed(host->base + MMCICLOCK);
+	host->datactrl_reg = readl_relaxed(host->base + MMCIDATACTRL);
+
 	/* We support these capabilities. */
 	mmc->caps |= MMC_CAP_CMD23;