| Message ID | 20200227182210.89512-4-andre.przywara@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm: calxeda: update DTS, bindings and MAINTAINERS | expand |
On Thu, Feb 27, 2020 at 06:22:00PM +0000, Andre Przywara wrote: > Currently multiple interrupts for some devices are written as one array > instead of using the DT grouping notation (<0 42 4>, <0 23 4>). > This ends up in the same binary representation in the .dtb, but is > semantically not equivalent. The yaml schema checks will stumble over > this, so lets fix that first. > > I refrained from using the symbolic names for GIC_SPI/GIC_PPI and > IRQ_TYPE_LEVEL_HIGH, mostly because it increases the delta between the > original DTS files and the mainline versions, so it's just additional > churn. > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > --- > arch/arm/boot/dts/ecx-2000.dts | 2 +- > arch/arm/boot/dts/ecx-common.dtsi | 4 ++-- > arch/arm/boot/dts/highbank.dts | 4 ++-- > 3 files changed, 5 insertions(+), 5 deletions(-) Acked-by: Rob Herring <robh@kernel.org>
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts index 81eb382b4c23..93cdd020637b 100644 --- a/arch/arm/boot/dts/ecx-2000.dts +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -92,7 +92,7 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; + interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>; }; }; }; diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi index f819e3328a9e..b7e74a357471 100644 --- a/arch/arm/boot/dts/ecx-common.dtsi +++ b/arch/arm/boot/dts/ecx-common.dtsi @@ -202,14 +202,14 @@ ethernet@fff50000 { compatible = "calxeda,hb-xgmac"; reg = <0xfff50000 0x1000>; - interrupts = <0 77 4 0 78 4 0 79 4>; + interrupts = <0 77 4>, <0 78 4>, <0 79 4>; dma-coherent; }; ethernet@fff51000 { compatible = "calxeda,hb-xgmac"; reg = <0xfff51000 0x1000>; - interrupts = <0 80 4 0 81 4 0 82 4>; + interrupts = <0 80 4>, <0 81 4>, <0 82 4>; dma-coherent; }; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 9e34d1bd7994..b6b0225a769e 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -142,14 +142,14 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; + interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>; }; sregs@fff3c200 { compatible = "calxeda,hb-sregs-l2-ecc"; reg = <0xfff3c200 0x100>; - interrupts = <0 71 4 0 72 4>; + interrupts = <0 71 4>, <0 72 4>; }; };
Currently multiple interrupts for some devices are written as one array instead of using the DT grouping notation (<0 42 4>, <0 23 4>). This ends up in the same binary representation in the .dtb, but is semantically not equivalent. The yaml schema checks will stumble over this, so lets fix that first. I refrained from using the symbolic names for GIC_SPI/GIC_PPI and IRQ_TYPE_LEVEL_HIGH, mostly because it increases the delta between the original DTS files and the mainline versions, so it's just additional churn. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm/boot/dts/ecx-2000.dts | 2 +- arch/arm/boot/dts/ecx-common.dtsi | 4 ++-- arch/arm/boot/dts/highbank.dts | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-)