From patchwork Mon Mar 2 18:07:46 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tudor Ambarus X-Patchwork-Id: 11415993 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id CD3E0930 for ; Mon, 2 Mar 2020 18:14:39 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 85D972146E for ; Mon, 2 Mar 2020 18:14:39 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="QE9wZgsP"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=microchiptechnology.onmicrosoft.com header.i=@microchiptechnology.onmicrosoft.com header.b="qptkXL2K" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 85D972146E Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=microchip.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:In-Reply-To:References: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=pJa76F+8+SanvtzZzFmij3re3W3hojkVjiVhSFYg6u0=; b=QE9wZgsP+YvJAr pdwXhDB9mYYqo+Gif0eyl7hACpZuMNEkecxuQx8/d7WNYcqZBKBY65OQuZ15tyRF+QIBpU8IOQ4v7 D4xQU0azWWwjL5nzwo3SPIU4upPtnAuwXfx9QUahOA+S4Djy/FE71w4njuQTLUFo0pZRet4QSySsH EI7jlW/juyBWh9WjlabapZCCSuf7B5+/a6NtuZbBZpI95IkolNGPBYn+B7s3bFnGHZY5roVM8u4ub ujrqoO4OD/yvHf6AIQvtRFxSoqj9oJWjfD7v+y8PyJx9Rz08RGD7a5ZIDsbTozMzcXJsgQ5DxH4xv ZSSQp40iyYxBQrrbOvPA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1j8paN-0000rz-Iw; Mon, 02 Mar 2020 18:14:35 +0000 Received: from esa5.microchip.iphmx.com ([216.71.150.166]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1j8pTv-0002mS-RE; Mon, 02 Mar 2020 18:08:08 +0000 Received-SPF: Pass (esa5.microchip.iphmx.com: domain of Tudor.Ambarus@microchip.com designates 198.175.253.82 as permitted sender) identity=mailfrom; client-ip=198.175.253.82; receiver=esa5.microchip.iphmx.com; envelope-from="Tudor.Ambarus@microchip.com"; x-sender="Tudor.Ambarus@microchip.com"; x-conformance=spf_only; x-record-type="v=spf1"; x-record-text="v=spf1 mx a:ushub1.microchip.com a:smtpout.microchip.com -exists:%{i}.spf.microchip.iphmx.com include:servers.mcsv.net include:mktomail.com include:spf.protection.outlook.com ~all" Received-SPF: None (esa5.microchip.iphmx.com: no sender authenticity information available from domain of postmaster@email.microchip.com) identity=helo; client-ip=198.175.253.82; receiver=esa5.microchip.iphmx.com; envelope-from="Tudor.Ambarus@microchip.com"; x-sender="postmaster@email.microchip.com"; x-conformance=spf_only Authentication-Results: esa5.microchip.iphmx.com; spf=Pass smtp.mailfrom=Tudor.Ambarus@microchip.com; spf=None smtp.helo=postmaster@email.microchip.com; dmarc=pass (p=none dis=none) d=microchip.com IronPort-SDR: 5VJEgZFt/YJi2k6AV27twJu9nkSYd73i/VSOdPT0ToK1iXl5cQ9hIhZH9xEfQ/bcvH2LCDte4n bJWhxd8Um2hECrY5//s78Z0dscEOPyi3zqHnQezaG9hzRuul+gM+let8WaYxxFm+khTc2YnhCE 4Ch8NMVR2ZPhBGNoBEejHy5aBmvNM25GsPT7tj9uZ7zRnXy3XkpWr+21Gd+0aW2NIsjzyKyFjS Agex5gGxkFixTpVo0JCJN1YqCZ5v19C4V5VAhcWZgegRRa+0yj8uOQeETCOemmhRjozXpTvJSx gxU= X-IronPort-AV: E=Sophos;i="5.70,507,1574146800"; d="scan'208";a="67338199" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa5.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 02 Mar 2020 11:07:53 -0700 Received: from chn-vm-ex02.mchp-main.com (10.10.85.144) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1713.5; Mon, 2 Mar 2020 11:07:51 -0700 Received: from NAM12-MW2-obe.outbound.protection.outlook.com (10.10.215.89) by email.microchip.com (10.10.87.72) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1713.5 via Frontend Transport; Mon, 2 Mar 2020 11:08:05 -0700 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=GOAxYbx2BHI22Yn21FimiQeeVt7u7XlpCeLULxA7C3KWHbQHUFthKQiuT86DA0anmB9ex1Ja1ulHDPen9oxH2Myta0Y8xkdxLjBD7qYHBW8f/yFEQhjGsg9JgfHTBeOyxu2pgYkQHx3d1MVrL/jwePsV0vnvrW0LmgxImOU6uxe0psnHqt8eVZF7sj/vRfW/AfdqW3q2EpipMmffqeNT/HoGWvOhjisboxA2/Pnu7+qdGsE0dIvxblrpys1g7mtdNLY3gIKcR/k6IRuSXyTqafdZbu2YuN4OaE9Fpi5emqmCzHh/OOxreHwW/bRI2wFt6NdUe8duu7FdpuUVkhuomA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=DJTqwktV73Ok0+fKoMEMqnhABPlCBCCr4dVANe61GyQ=; b=bShj634V2z1d/TKv0a89gt0EQqjg/GWMXFpPDqPseyKRboPLl89X5F01yOteSiNzTHYUcwH0PghQJdUf5gJ3FY/jUAJ1XH4TL+ah/XiwEEfxfjDzdIBsdf5oXxX5mO+cAPt3k7BRuuamVCK/xtPX0tGhA0jxnBeOus8/kHCLaUkoG3qF4+d28WsCsMgjNVEdc2UrykfbJhSHLnQDWiiT1Ql5UkehauRK5Z2lryfJpO9NshLgUNuFWUMoG97JMYru/UNcPK3M+r8q/AFnHEl6FPTdbf2iDKZDno5v/K09YXqWmHr2jobGaUxG9sWvBFpzv73KSiG/yQ1uJ62kJ1rLug== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=microchip.com; dmarc=pass action=none header.from=microchip.com; dkim=pass header.d=microchip.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=microchiptechnology.onmicrosoft.com; s=selector2-microchiptechnology-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=DJTqwktV73Ok0+fKoMEMqnhABPlCBCCr4dVANe61GyQ=; b=qptkXL2KT8fpvwUzgUChe47VNKHRti7h0AW9g2Ynj7/+RcEFNC46VdnpE1DXo0J/JZ/d0yEPKKIu28yVkxpvgE8xUOSDNxsD/UvbsbwO8AAJSgkZoIa1VshmcZP+CGk1IV29x3fwpTww178BEO3vr7RDw9F/9MWgKI2SnajQowI= Received: from MN2PR11MB4448.namprd11.prod.outlook.com (2603:10b6:208:193::29) by MN2PR11MB4142.namprd11.prod.outlook.com (2603:10b6:208:135::29) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.2772.14; Mon, 2 Mar 2020 18:07:47 +0000 Received: from MN2PR11MB4448.namprd11.prod.outlook.com ([fe80::3c8f:7a55:cbd:adfb]) by MN2PR11MB4448.namprd11.prod.outlook.com ([fe80::3c8f:7a55:cbd:adfb%5]) with mapi id 15.20.2772.019; Mon, 2 Mar 2020 18:07:47 +0000 From: To: , , Subject: [PATCH 03/23] mtd: spi-nor: Move SFDP logic out of the core Thread-Topic: [PATCH 03/23] mtd: spi-nor: Move SFDP logic out of the core Thread-Index: AQHV8L16RIFDrxU/Nk2xlPJ0CBzWLw== Date: Mon, 2 Mar 2020 18:07:46 +0000 Message-ID: <20200302180730.1886678-4-tudor.ambarus@microchip.com> References: <20200302180730.1886678-1-tudor.ambarus@microchip.com> In-Reply-To: <20200302180730.1886678-1-tudor.ambarus@microchip.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [94.177.32.156] x-ms-publictraffictype: Email x-ms-office365-filtering-correlation-id: bd5cbf9e-b533-4ebb-3a10-08d7bed49cec x-ms-traffictypediagnostic: MN2PR11MB4142: x-ms-exchange-transport-forked: True x-microsoft-antispam-prvs: x-ms-oob-tlc-oobclassifiers: OLM:9508; x-forefront-prvs: 033054F29A x-forefront-antispam-report: SFV:NSPM; SFS:(10009020)(346002)(366004)(39860400002)(136003)(396003)(376002)(189003)(199004)(36756003)(26005)(66446008)(107886003)(6486002)(186003)(2616005)(4326008)(478600001)(6512007)(91956017)(64756008)(66946007)(2906002)(71200400001)(76116006)(8936002)(316002)(30864003)(86362001)(54906003)(6506007)(66556008)(5660300002)(66476007)(7406005)(1076003)(7416002)(81156014)(81166006)(110136005)(8676002)(579004)(559001); DIR:OUT; SFP:1101; SCL:1; SRVR:MN2PR11MB4142; H:MN2PR11MB4448.namprd11.prod.outlook.com; FPR:; SPF:None; LANG:en; PTR:InfoNoRecords; MX:1; A:1; received-spf: None (protection.outlook.com: microchip.com does not designate permitted sender hosts) x-ms-exchange-senderadcheck: 1 x-microsoft-antispam: BCL:0; x-microsoft-antispam-message-info: efBumHkqPwfTHJERenXXmBcbeFCVrKEXmJpQo/iyNJmwU3NYyXmOSy2p8fDx/4RvnWXW7mUBCEEOZoCS6dp5eN3Tmw/juDHluY1qs4YOdnPFDKa09nj3WCucafw3qR4r/Sa/HdIc+UkJV5YnGsUKCRTAjR53SKoLWV8UIqmWAUQxWHXKVVuy/J7rCTTQLtnzQjtcURmOpJUkoAeUR8n6s5p7u69gXP0MnDw02Tx5Kxpce6FpLBYoNGs0+wDEbvkFuHV4vImxkLIxLb7liiIsD6JKk0keyTSsFL4yvJpnJEfvnaDZUBxQdqNIECooZyGtuEdVwO98H8Dpm0tNdESeSKgE7U5Ny79166e42+kFfr+JQIpxoJF/c13sSI/3xnqqfIw5r6P1T6HsK5Pri0FKC4+j5QKgGQ/ms7sr1LlcLbux3xqdb7D/uu+/YMx23dFR x-ms-exchange-antispam-messagedata: 5J9Nv+nPwGzkMTndlOCGGDxl1U4bEiR3zjhNLQe7nXH8r9lLTOGC0hCvo8y3uqc/L3m34+YtOkqTeUIpyn8xN73KLEYglhn+WYdGWlDtiIMDrmJBrmvUY649qI0VuwKd6/5z82lC7DJJR7Qtl2f4fg== MIME-Version: 1.0 X-MS-Exchange-CrossTenant-Network-Message-Id: bd5cbf9e-b533-4ebb-3a10-08d7bed49cec X-MS-Exchange-CrossTenant-originalarrivaltime: 02 Mar 2020 18:07:46.5539 (UTC) X-MS-Exchange-CrossTenant-fromentityheader: Hosted X-MS-Exchange-CrossTenant-id: 3f4057f3-b418-4d4e-ba84-d55b4e897d88 X-MS-Exchange-CrossTenant-mailboxtype: HOSTED X-MS-Exchange-CrossTenant-userprincipalname: XB0lEJqFaWlP/KGGskIvMcU9lecI1kitK/sS9SqGbMleIkgZT2TV/IJLlqmk1j3ur1KXQHMN7RCMb3Ctt8ki8eUVEtyKRs6JuO6SSJI1Ias= X-MS-Exchange-Transport-CrossTenantHeadersStamped: MN2PR11MB4142 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200302_100756_060919_1F3F29BC X-CRM114-Status: GOOD ( 11.82 ) X-Spam-Score: -2.3 (--) X-Spam-Report: SpamAssassin version 3.4.3 on bombadil.infradead.org summary: Content analysis details: (-2.3 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [216.71.150.166 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: kstewart@linuxfoundation.org, alexandre.belloni@bootlin.com, linux-aspeed@lists.ozlabs.org, thor.thayer@linux.intel.com, jethro@fortanix.com, rfontana@redhat.com, miquel.raynal@bootlin.com, opensource@jilayne.com, richard@nod.at, michal.simek@xilinx.com, Ludovic.Desroches@microchip.com, joel@jms.id.au, nishkadg.linux@gmail.com, Tudor.Ambarus@microchip.com, john.garry@huawei.com, vz@mleia.com, alexander.sverdlin@nokia.com, matthias.bgg@gmail.com, tglx@linutronix.de, swboyd@chromium.org, mika.westerberg@linux.intel.com, allison@lohutok.net, linux-arm-kernel@lists.infradead.org, andrew@aj.id.au, linux-kernel@vger.kernel.org, dinguyen@kernel.org, michael@walle.cc, ludovic.barre@st.com, linux-mediatek@lists.infradead.org, info@metux.net Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org From: Tudor Ambarus It makes the core file a bit smaller and provides better separation between the SFDP parsing and core logic. Keep the core.h and sfdp.h definitions private in drivers/mtd/spi-nor/. Both expose just the definitions that are required by the core and manufacturer drivers. None of the SPI NOR controller drivers should include them. Signed-off-by: Tudor Ambarus Reviewed-by: Boris Brezillon --- drivers/mtd/spi-nor/Makefile | 2 +- drivers/mtd/spi-nor/core.c | 1315 +--------------------------------- drivers/mtd/spi-nor/core.h | 36 + drivers/mtd/spi-nor/sfdp.c | 1196 +++++++++++++++++++++++++++++++ drivers/mtd/spi-nor/sfdp.h | 98 +++ 5 files changed, 1350 insertions(+), 1297 deletions(-) create mode 100644 drivers/mtd/spi-nor/core.h create mode 100644 drivers/mtd/spi-nor/sfdp.c create mode 100644 drivers/mtd/spi-nor/sfdp.h diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index d6fc70ab4a32..6bcdb6f1615a 100644 --- a/drivers/mtd/spi-nor/Makefile +++ b/drivers/mtd/spi-nor/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -spi-nor-objs := core.o +spi-nor-objs := core.o sfdp.o obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c index b15e262765e1..1edcb53c4df3 100644 --- a/drivers/mtd/spi-nor/core.c +++ b/drivers/mtd/spi-nor/core.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include @@ -23,6 +22,8 @@ #include #include +#include "core.h" + /* Define max times to check status register before we give up. */ /* @@ -40,118 +41,6 @@ #define SPI_NOR_MAX_ID_LEN 6 #define SPI_NOR_MAX_ADDR_WIDTH 4 -struct sfdp_parameter_header { - u8 id_lsb; - u8 minor; - u8 major; - u8 length; /* in double words */ - u8 parameter_table_pointer[3]; /* byte address */ - u8 id_msb; -}; - -#define SFDP_PARAM_HEADER_ID(p) (((p)->id_msb << 8) | (p)->id_lsb) -#define SFDP_PARAM_HEADER_PTP(p) \ - (((p)->parameter_table_pointer[2] << 16) | \ - ((p)->parameter_table_pointer[1] << 8) | \ - ((p)->parameter_table_pointer[0] << 0)) - -#define SFDP_BFPT_ID 0xff00 /* Basic Flash Parameter Table */ -#define SFDP_SECTOR_MAP_ID 0xff81 /* Sector Map Table */ -#define SFDP_4BAIT_ID 0xff84 /* 4-byte Address Instruction Table */ - -#define SFDP_SIGNATURE 0x50444653U -#define SFDP_JESD216_MAJOR 1 -#define SFDP_JESD216_MINOR 0 -#define SFDP_JESD216A_MINOR 5 -#define SFDP_JESD216B_MINOR 6 - -struct sfdp_header { - u32 signature; /* Ox50444653U <=> "SFDP" */ - u8 minor; - u8 major; - u8 nph; /* 0-base number of parameter headers */ - u8 unused; - - /* Basic Flash Parameter Table. */ - struct sfdp_parameter_header bfpt_header; -}; - -/* Basic Flash Parameter Table */ - -/* - * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs. - * They are indexed from 1 but C arrays are indexed from 0. - */ -#define BFPT_DWORD(i) ((i) - 1) -#define BFPT_DWORD_MAX 16 - -/* The first version of JESD216 defined only 9 DWORDs. */ -#define BFPT_DWORD_MAX_JESD216 9 - -/* 1st DWORD. */ -#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16) -#define BFPT_DWORD1_ADDRESS_BYTES_MASK GENMASK(18, 17) -#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY (0x0UL << 17) -#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 (0x1UL << 17) -#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY (0x2UL << 17) -#define BFPT_DWORD1_DTR BIT(19) -#define BFPT_DWORD1_FAST_READ_1_2_2 BIT(20) -#define BFPT_DWORD1_FAST_READ_1_4_4 BIT(21) -#define BFPT_DWORD1_FAST_READ_1_1_4 BIT(22) - -/* 5th DWORD. */ -#define BFPT_DWORD5_FAST_READ_2_2_2 BIT(0) -#define BFPT_DWORD5_FAST_READ_4_4_4 BIT(4) - -/* 11th DWORD. */ -#define BFPT_DWORD11_PAGE_SIZE_SHIFT 4 -#define BFPT_DWORD11_PAGE_SIZE_MASK GENMASK(7, 4) - -/* 15th DWORD. */ - -/* - * (from JESD216 rev B) - * Quad Enable Requirements (QER): - * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4 - * reads based on instruction. DQ3/HOLD# functions are hold during - * instruction phase. - * - 001b: QE is bit 1 of status register 2. It is set via Write Status with - * two data bytes where bit 1 of the second byte is one. - * [...] - * Writing only one byte to the status register has the side-effect of - * clearing status register 2, including the QE bit. The 100b code is - * used if writing one byte to the status register does not modify - * status register 2. - * - 010b: QE is bit 6 of status register 1. It is set via Write Status with - * one data byte where bit 6 is one. - * [...] - * - 011b: QE is bit 7 of status register 2. It is set via Write status - * register 2 instruction 3Eh with one data byte where bit 7 is one. - * [...] - * The status register 2 is read using instruction 3Fh. - * - 100b: QE is bit 1 of status register 2. It is set via Write Status with - * two data bytes where bit 1 of the second byte is one. - * [...] - * In contrast to the 001b code, writing one byte to the status - * register does not modify status register 2. - * - 101b: QE is bit 1 of status register 2. Status register 1 is read using - * Read Status instruction 05h. Status register2 is read using - * instruction 35h. QE is set via Write Status instruction 01h with - * two data bytes where bit 1 of the second byte is one. - * [...] - */ -#define BFPT_DWORD15_QER_MASK GENMASK(22, 20) -#define BFPT_DWORD15_QER_NONE (0x0UL << 20) /* Micron */ -#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY (0x1UL << 20) -#define BFPT_DWORD15_QER_SR1_BIT6 (0x2UL << 20) /* Macronix */ -#define BFPT_DWORD15_QER_SR2_BIT7 (0x3UL << 20) -#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20) -#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */ - -struct sfdp_bfpt { - u32 dwords[BFPT_DWORD_MAX]; -}; - /** * struct spi_nor_fixups - SPI NOR fixup hooks * @default_init: called after default flash parameters init. Used to tweak @@ -345,8 +234,7 @@ static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from, * * Return: number of bytes read successfully, -errno otherwise */ -static ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, - u8 *buf) +ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, u8 *buf) { if (nor->spimem) return spi_nor_spimem_read_data(nor, from, len, buf); @@ -1271,7 +1159,7 @@ static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size) return opcode; } -static u8 spi_nor_convert_3to4_read(u8 opcode) +u8 spi_nor_convert_3to4_read(u8 opcode) { static const u8 spi_nor_3to4_read[][2] = { { SPINOR_OP_READ, SPINOR_OP_READ_4B }, @@ -1496,7 +1384,7 @@ spi_nor_find_best_erase_type(const struct spi_nor_erase_map *map, * * Return: the next spi nor region or NULL if last region. */ -static struct spi_nor_erase_region * +struct spi_nor_erase_region * spi_nor_region_next(struct spi_nor_erase_region *region) { if (spi_nor_region_is_last(region)) @@ -2125,7 +2013,7 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) * * Return: 0 on success, -errno otherwise. */ -static int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor) +int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor) { int ret; @@ -2150,7 +2038,7 @@ static int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor) * * Return: 0 on success, -errno otherwise. */ -static int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor) +int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor) { int ret; @@ -2181,7 +2069,7 @@ static int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor) * * Return: 0 on success, -errno otherwise. */ -static int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor) +int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor) { u8 *sr2 = nor->bouncebuf; int ret; @@ -3029,10 +2917,8 @@ spi_nor_set_read_settings(struct spi_nor_read_command *read, read->proto = proto; } -static void -spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, - u8 opcode, - enum spi_nor_protocol proto) +void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode, + enum spi_nor_protocol proto) { pp->opcode = opcode; pp->proto = proto; @@ -3049,7 +2935,7 @@ static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size) return -EINVAL; } -static int spi_nor_hwcaps_read2cmd(u32 hwcaps) +int spi_nor_hwcaps_read2cmd(u32 hwcaps) { static const int hwcaps_read2cmd[][2] = { { SNOR_HWCAPS_READ, SNOR_CMD_READ }, @@ -3089,76 +2975,6 @@ static int spi_nor_hwcaps_pp2cmd(u32 hwcaps) ARRAY_SIZE(hwcaps_pp2cmd)); } -/* - * Serial Flash Discoverable Parameters (SFDP) parsing. - */ - -/** - * spi_nor_read_raw() - raw read of serial flash memory. read_opcode, - * addr_width and read_dummy members of the struct spi_nor - * should be previously - * set. - * @nor: pointer to a 'struct spi_nor' - * @addr: offset in the serial flash memory - * @len: number of bytes to read - * @buf: buffer where the data is copied into (dma-safe memory) - * - * Return: 0 on success, -errno otherwise. - */ -static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf) -{ - ssize_t ret; - - while (len) { - ret = spi_nor_read_data(nor, addr, len, buf); - if (ret < 0) - return ret; - if (!ret || ret > len) - return -EIO; - - buf += ret; - addr += ret; - len -= ret; - } - return 0; -} - -/** - * spi_nor_read_sfdp() - read Serial Flash Discoverable Parameters. - * @nor: pointer to a 'struct spi_nor' - * @addr: offset in the SFDP area to start reading data from - * @len: number of bytes to read - * @buf: buffer where the SFDP data are copied into (dma-safe memory) - * - * Whatever the actual numbers of bytes for address and dummy cycles are - * for (Fast) Read commands, the Read SFDP (5Ah) instruction is always - * followed by a 3-byte address and 8 dummy clock cycles. - * - * Return: 0 on success, -errno otherwise. - */ -static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr, - size_t len, void *buf) -{ - u8 addr_width, read_opcode, read_dummy; - int ret; - - read_opcode = nor->read_opcode; - addr_width = nor->addr_width; - read_dummy = nor->read_dummy; - - nor->read_opcode = SPINOR_OP_RDSFDP; - nor->addr_width = 3; - nor->read_dummy = 8; - - ret = spi_nor_read_raw(nor, addr, len, buf); - - nor->read_opcode = read_opcode; - nor->addr_width = addr_width; - nor->read_dummy = read_dummy; - - return ret; -} - /** * spi_nor_spimem_check_op - check if the operation is supported * by controller @@ -3279,153 +3095,14 @@ spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps) } } -/** - * spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters. - * @nor: pointer to a 'struct spi_nor' - * @addr: offset in the SFDP area to start reading data from - * @len: number of bytes to read - * @buf: buffer where the SFDP data are copied into - * - * Wrap spi_nor_read_sfdp() using a kmalloc'ed bounce buffer as @buf is now not - * guaranteed to be dma-safe. - * - * Return: -ENOMEM if kmalloc() fails, the return code of spi_nor_read_sfdp() - * otherwise. - */ -static int spi_nor_read_sfdp_dma_unsafe(struct spi_nor *nor, u32 addr, - size_t len, void *buf) -{ - void *dma_safe_buf; - int ret; - - dma_safe_buf = kmalloc(len, GFP_KERNEL); - if (!dma_safe_buf) - return -ENOMEM; - - ret = spi_nor_read_sfdp(nor, addr, len, dma_safe_buf); - memcpy(buf, dma_safe_buf, len); - kfree(dma_safe_buf); - - return ret; -} - -/* Fast Read settings. */ - -static void -spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read, - u16 half, - enum spi_nor_protocol proto) -{ - read->num_mode_clocks = (half >> 5) & 0x07; - read->num_wait_states = (half >> 0) & 0x1f; - read->opcode = (half >> 8) & 0xff; - read->proto = proto; -} - -struct sfdp_bfpt_read { - /* The Fast Read x-y-z hardware capability in params->hwcaps.mask. */ - u32 hwcaps; - - /* - * The bit in BFPT DWORD tells us - * whether the Fast Read x-y-z command is supported. - */ - u32 supported_dword; - u32 supported_bit; - - /* - * The half-word at offset in BFPT DWORD - * encodes the op code, the number of mode clocks and the number of wait - * states to be used by Fast Read x-y-z command. - */ - u32 settings_dword; - u32 settings_shift; - - /* The SPI protocol for this Fast Read x-y-z command. */ - enum spi_nor_protocol proto; -}; - -static const struct sfdp_bfpt_read sfdp_bfpt_reads[] = { - /* Fast Read 1-1-2 */ - { - SNOR_HWCAPS_READ_1_1_2, - BFPT_DWORD(1), BIT(16), /* Supported bit */ - BFPT_DWORD(4), 0, /* Settings */ - SNOR_PROTO_1_1_2, - }, - - /* Fast Read 1-2-2 */ - { - SNOR_HWCAPS_READ_1_2_2, - BFPT_DWORD(1), BIT(20), /* Supported bit */ - BFPT_DWORD(4), 16, /* Settings */ - SNOR_PROTO_1_2_2, - }, - - /* Fast Read 2-2-2 */ - { - SNOR_HWCAPS_READ_2_2_2, - BFPT_DWORD(5), BIT(0), /* Supported bit */ - BFPT_DWORD(6), 16, /* Settings */ - SNOR_PROTO_2_2_2, - }, - - /* Fast Read 1-1-4 */ - { - SNOR_HWCAPS_READ_1_1_4, - BFPT_DWORD(1), BIT(22), /* Supported bit */ - BFPT_DWORD(3), 16, /* Settings */ - SNOR_PROTO_1_1_4, - }, - - /* Fast Read 1-4-4 */ - { - SNOR_HWCAPS_READ_1_4_4, - BFPT_DWORD(1), BIT(21), /* Supported bit */ - BFPT_DWORD(3), 0, /* Settings */ - SNOR_PROTO_1_4_4, - }, - - /* Fast Read 4-4-4 */ - { - SNOR_HWCAPS_READ_4_4_4, - BFPT_DWORD(5), BIT(4), /* Supported bit */ - BFPT_DWORD(7), 16, /* Settings */ - SNOR_PROTO_4_4_4, - }, -}; - -struct sfdp_bfpt_erase { - /* - * The half-word at offset in DWORD encodes the - * op code and erase sector size to be used by Sector Erase commands. - */ - u32 dword; - u32 shift; -}; - -static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = { - /* Erase Type 1 in DWORD8 bits[15:0] */ - {BFPT_DWORD(8), 0}, - - /* Erase Type 2 in DWORD8 bits[31:16] */ - {BFPT_DWORD(8), 16}, - - /* Erase Type 3 in DWORD9 bits[15:0] */ - {BFPT_DWORD(9), 0}, - - /* Erase Type 4 in DWORD9 bits[31:16] */ - {BFPT_DWORD(9), 16}, -}; - /** * spi_nor_set_erase_type() - set a SPI NOR erase type * @erase: pointer to a structure that describes a SPI NOR erase type * @size: the size of the sector/block erased by the erase type * @opcode: the SPI command op code to erase the sector/block */ -static void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, - u32 size, u8 opcode) +void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size, + u8 opcode) { erase->size = size; erase->opcode = opcode; @@ -3434,104 +3111,6 @@ static void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, erase->size_mask = (1 << erase->size_shift) - 1; } -/** - * spi_nor_set_erase_settings_from_bfpt() - set erase type settings from BFPT - * @erase: pointer to a structure that describes a SPI NOR erase type - * @size: the size of the sector/block erased by the erase type - * @opcode: the SPI command op code to erase the sector/block - * @i: erase type index as sorted in the Basic Flash Parameter Table - * - * The supported Erase Types will be sorted at init in ascending order, with - * the smallest Erase Type size being the first member in the erase_type array - * of the spi_nor_erase_map structure. Save the Erase Type index as sorted in - * the Basic Flash Parameter Table since it will be used later on to - * synchronize with the supported Erase Types defined in SFDP optional tables. - */ -static void -spi_nor_set_erase_settings_from_bfpt(struct spi_nor_erase_type *erase, - u32 size, u8 opcode, u8 i) -{ - erase->idx = i; - spi_nor_set_erase_type(erase, size, opcode); -} - -/** - * spi_nor_map_cmp_erase_type() - compare the map's erase types by size - * @l: member in the left half of the map's erase_type array - * @r: member in the right half of the map's erase_type array - * - * Comparison function used in the sort() call to sort in ascending order the - * map's erase types, the smallest erase type size being the first member in the - * sorted erase_type array. - * - * Return: the result of @l->size - @r->size - */ -static int spi_nor_map_cmp_erase_type(const void *l, const void *r) -{ - const struct spi_nor_erase_type *left = l, *right = r; - - return left->size - right->size; -} - -/** - * spi_nor_sort_erase_mask() - sort erase mask - * @map: the erase map of the SPI NOR - * @erase_mask: the erase type mask to be sorted - * - * Replicate the sort done for the map's erase types in BFPT: sort the erase - * mask in ascending order with the smallest erase type size starting from - * BIT(0) in the sorted erase mask. - * - * Return: sorted erase mask. - */ -static u8 spi_nor_sort_erase_mask(struct spi_nor_erase_map *map, u8 erase_mask) -{ - struct spi_nor_erase_type *erase_type = map->erase_type; - int i; - u8 sorted_erase_mask = 0; - - if (!erase_mask) - return 0; - - /* Replicate the sort done for the map's erase types. */ - for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) - if (erase_type[i].size && erase_mask & BIT(erase_type[i].idx)) - sorted_erase_mask |= BIT(i); - - return sorted_erase_mask; -} - -/** - * spi_nor_regions_sort_erase_types() - sort erase types in each region - * @map: the erase map of the SPI NOR - * - * Function assumes that the erase types defined in the erase map are already - * sorted in ascending order, with the smallest erase type size being the first - * member in the erase_type array. It replicates the sort done for the map's - * erase types. Each region's erase bitmask will indicate which erase types are - * supported from the sorted erase types defined in the erase map. - * Sort the all region's erase type at init in order to speed up the process of - * finding the best erase command at runtime. - */ -static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map) -{ - struct spi_nor_erase_region *region = map->regions; - u8 region_erase_mask, sorted_erase_mask; - - while (region) { - region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK; - - sorted_erase_mask = spi_nor_sort_erase_mask(map, - region_erase_mask); - - /* Overwrite erase mask. */ - region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) | - sorted_erase_mask; - - region = spi_nor_region_next(region); - } -} - /** * spi_nor_init_uniform_erase_map() - Initialize uniform erase map * @map: the erase map of the SPI NOR @@ -3539,8 +3118,8 @@ static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map) * flash memory * @flash_size: the spi nor flash memory size */ -static void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map, - u8 erase_mask, u64 flash_size) +void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map, + u8 erase_mask, u64 flash_size) { /* Offset 0 with erase_mask and SNOR_LAST_REGION bit set */ map->uniform_region.offset = (erase_mask & SNOR_ERASE_TYPE_MASK) | @@ -3550,11 +3129,10 @@ static void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map, map->uniform_erase_type = erase_mask; } -static int -spi_nor_post_bfpt_fixups(struct spi_nor *nor, - const struct sfdp_parameter_header *bfpt_header, - const struct sfdp_bfpt *bfpt, - struct spi_nor_flash_parameter *params) +int spi_nor_post_bfpt_fixups(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) { if (nor->info->fixups && nor->info->fixups->post_bfpt) return nor->info->fixups->post_bfpt(nor, bfpt_header, bfpt, @@ -3563,861 +3141,6 @@ spi_nor_post_bfpt_fixups(struct spi_nor *nor, return 0; } -/** - * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table. - * @nor: pointer to a 'struct spi_nor' - * @bfpt_header: pointer to the 'struct sfdp_parameter_header' describing - * the Basic Flash Parameter Table length and version - * @params: pointer to the 'struct spi_nor_flash_parameter' to be - * filled - * - * The Basic Flash Parameter Table is the main and only mandatory table as - * defined by the SFDP (JESD216) specification. - * It provides us with the total size (memory density) of the data array and - * the number of address bytes for Fast Read, Page Program and Sector Erase - * commands. - * For Fast READ commands, it also gives the number of mode clock cycles and - * wait states (regrouped in the number of dummy clock cycles) for each - * supported instruction op code. - * For Page Program, the page size is now available since JESD216 rev A, however - * the supported instruction op codes are still not provided. - * For Sector Erase commands, this table stores the supported instruction op - * codes and the associated sector sizes. - * Finally, the Quad Enable Requirements (QER) are also available since JESD216 - * rev A. The QER bits encode the manufacturer dependent procedure to be - * executed to set the Quad Enable (QE) bit in some internal register of the - * Quad SPI memory. Indeed the QE bit, when it exists, must be set before - * sending any Quad SPI command to the memory. Actually, setting the QE bit - * tells the memory to reassign its WP# and HOLD#/RESET# pins to functions IO2 - * and IO3 hence enabling 4 (Quad) I/O lines. - * - * Return: 0 on success, -errno otherwise. - */ -static int spi_nor_parse_bfpt(struct spi_nor *nor, - const struct sfdp_parameter_header *bfpt_header, - struct spi_nor_flash_parameter *params) -{ - struct spi_nor_erase_map *map = ¶ms->erase_map; - struct spi_nor_erase_type *erase_type = map->erase_type; - struct sfdp_bfpt bfpt; - size_t len; - int i, cmd, err; - u32 addr; - u16 half; - u8 erase_mask; - - /* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */ - if (bfpt_header->length < BFPT_DWORD_MAX_JESD216) - return -EINVAL; - - /* Read the Basic Flash Parameter Table. */ - len = min_t(size_t, sizeof(bfpt), - bfpt_header->length * sizeof(u32)); - addr = SFDP_PARAM_HEADER_PTP(bfpt_header); - memset(&bfpt, 0, sizeof(bfpt)); - err = spi_nor_read_sfdp_dma_unsafe(nor, addr, len, &bfpt); - if (err < 0) - return err; - - /* Fix endianness of the BFPT DWORDs. */ - le32_to_cpu_array(bfpt.dwords, BFPT_DWORD_MAX); - - /* Number of address bytes. */ - switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) { - case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY: - nor->addr_width = 3; - break; - - case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY: - nor->addr_width = 4; - break; - - default: - break; - } - - /* Flash Memory Density (in bits). */ - params->size = bfpt.dwords[BFPT_DWORD(2)]; - if (params->size & BIT(31)) { - params->size &= ~BIT(31); - - /* - * Prevent overflows on params->size. Anyway, a NOR of 2^64 - * bits is unlikely to exist so this error probably means - * the BFPT we are reading is corrupted/wrong. - */ - if (params->size > 63) - return -EINVAL; - - params->size = 1ULL << params->size; - } else { - params->size++; - } - params->size >>= 3; /* Convert to bytes. */ - - /* Fast Read settings. */ - for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_reads); i++) { - const struct sfdp_bfpt_read *rd = &sfdp_bfpt_reads[i]; - struct spi_nor_read_command *read; - - if (!(bfpt.dwords[rd->supported_dword] & rd->supported_bit)) { - params->hwcaps.mask &= ~rd->hwcaps; - continue; - } - - params->hwcaps.mask |= rd->hwcaps; - cmd = spi_nor_hwcaps_read2cmd(rd->hwcaps); - read = ¶ms->reads[cmd]; - half = bfpt.dwords[rd->settings_dword] >> rd->settings_shift; - spi_nor_set_read_settings_from_bfpt(read, half, rd->proto); - } - - /* - * Sector Erase settings. Reinitialize the uniform erase map using the - * Erase Types defined in the bfpt table. - */ - erase_mask = 0; - memset(¶ms->erase_map, 0, sizeof(params->erase_map)); - for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) { - const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i]; - u32 erasesize; - u8 opcode; - - half = bfpt.dwords[er->dword] >> er->shift; - erasesize = half & 0xff; - - /* erasesize == 0 means this Erase Type is not supported. */ - if (!erasesize) - continue; - - erasesize = 1U << erasesize; - opcode = (half >> 8) & 0xff; - erase_mask |= BIT(i); - spi_nor_set_erase_settings_from_bfpt(&erase_type[i], erasesize, - opcode, i); - } - spi_nor_init_uniform_erase_map(map, erase_mask, params->size); - /* - * Sort all the map's Erase Types in ascending order with the smallest - * erase size being the first member in the erase_type array. - */ - sort(erase_type, SNOR_ERASE_TYPE_MAX, sizeof(erase_type[0]), - spi_nor_map_cmp_erase_type, NULL); - /* - * Sort the erase types in the uniform region in order to update the - * uniform_erase_type bitmask. The bitmask will be used later on when - * selecting the uniform erase. - */ - spi_nor_regions_sort_erase_types(map); - map->uniform_erase_type = map->uniform_region.offset & - SNOR_ERASE_TYPE_MASK; - - /* Stop here if not JESD216 rev A or later. */ - if (bfpt_header->length < BFPT_DWORD_MAX) - return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, - params); - - /* Page size: this field specifies 'N' so the page size = 2^N bytes. */ - params->page_size = bfpt.dwords[BFPT_DWORD(11)]; - params->page_size &= BFPT_DWORD11_PAGE_SIZE_MASK; - params->page_size >>= BFPT_DWORD11_PAGE_SIZE_SHIFT; - params->page_size = 1U << params->page_size; - - /* Quad Enable Requirements. */ - switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) { - case BFPT_DWORD15_QER_NONE: - params->quad_enable = NULL; - break; - - case BFPT_DWORD15_QER_SR2_BIT1_BUGGY: - /* - * Writing only one byte to the Status Register has the - * side-effect of clearing Status Register 2. - */ - case BFPT_DWORD15_QER_SR2_BIT1_NO_RD: - /* - * Read Configuration Register (35h) instruction is not - * supported. - */ - nor->flags |= SNOR_F_HAS_16BIT_SR | SNOR_F_NO_READ_CR; - params->quad_enable = spi_nor_sr2_bit1_quad_enable; - break; - - case BFPT_DWORD15_QER_SR1_BIT6: - nor->flags &= ~SNOR_F_HAS_16BIT_SR; - params->quad_enable = spi_nor_sr1_bit6_quad_enable; - break; - - case BFPT_DWORD15_QER_SR2_BIT7: - nor->flags &= ~SNOR_F_HAS_16BIT_SR; - params->quad_enable = spi_nor_sr2_bit7_quad_enable; - break; - - case BFPT_DWORD15_QER_SR2_BIT1: - /* - * JESD216 rev B or later does not specify if writing only one - * byte to the Status Register clears or not the Status - * Register 2, so let's be cautious and keep the default - * assumption of a 16-bit Write Status (01h) command. - */ - nor->flags |= SNOR_F_HAS_16BIT_SR; - - params->quad_enable = spi_nor_sr2_bit1_quad_enable; - break; - - default: - return -EINVAL; - } - - return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params); -} - -#define SMPT_CMD_ADDRESS_LEN_MASK GENMASK(23, 22) -#define SMPT_CMD_ADDRESS_LEN_0 (0x0UL << 22) -#define SMPT_CMD_ADDRESS_LEN_3 (0x1UL << 22) -#define SMPT_CMD_ADDRESS_LEN_4 (0x2UL << 22) -#define SMPT_CMD_ADDRESS_LEN_USE_CURRENT (0x3UL << 22) - -#define SMPT_CMD_READ_DUMMY_MASK GENMASK(19, 16) -#define SMPT_CMD_READ_DUMMY_SHIFT 16 -#define SMPT_CMD_READ_DUMMY(_cmd) \ - (((_cmd) & SMPT_CMD_READ_DUMMY_MASK) >> SMPT_CMD_READ_DUMMY_SHIFT) -#define SMPT_CMD_READ_DUMMY_IS_VARIABLE 0xfUL - -#define SMPT_CMD_READ_DATA_MASK GENMASK(31, 24) -#define SMPT_CMD_READ_DATA_SHIFT 24 -#define SMPT_CMD_READ_DATA(_cmd) \ - (((_cmd) & SMPT_CMD_READ_DATA_MASK) >> SMPT_CMD_READ_DATA_SHIFT) - -#define SMPT_CMD_OPCODE_MASK GENMASK(15, 8) -#define SMPT_CMD_OPCODE_SHIFT 8 -#define SMPT_CMD_OPCODE(_cmd) \ - (((_cmd) & SMPT_CMD_OPCODE_MASK) >> SMPT_CMD_OPCODE_SHIFT) - -#define SMPT_MAP_REGION_COUNT_MASK GENMASK(23, 16) -#define SMPT_MAP_REGION_COUNT_SHIFT 16 -#define SMPT_MAP_REGION_COUNT(_header) \ - ((((_header) & SMPT_MAP_REGION_COUNT_MASK) >> \ - SMPT_MAP_REGION_COUNT_SHIFT) + 1) - -#define SMPT_MAP_ID_MASK GENMASK(15, 8) -#define SMPT_MAP_ID_SHIFT 8 -#define SMPT_MAP_ID(_header) \ - (((_header) & SMPT_MAP_ID_MASK) >> SMPT_MAP_ID_SHIFT) - -#define SMPT_MAP_REGION_SIZE_MASK GENMASK(31, 8) -#define SMPT_MAP_REGION_SIZE_SHIFT 8 -#define SMPT_MAP_REGION_SIZE(_region) \ - (((((_region) & SMPT_MAP_REGION_SIZE_MASK) >> \ - SMPT_MAP_REGION_SIZE_SHIFT) + 1) * 256) - -#define SMPT_MAP_REGION_ERASE_TYPE_MASK GENMASK(3, 0) -#define SMPT_MAP_REGION_ERASE_TYPE(_region) \ - ((_region) & SMPT_MAP_REGION_ERASE_TYPE_MASK) - -#define SMPT_DESC_TYPE_MAP BIT(1) -#define SMPT_DESC_END BIT(0) - -/** - * spi_nor_smpt_addr_width() - return the address width used in the - * configuration detection command. - * @nor: pointer to a 'struct spi_nor' - * @settings: configuration detection command descriptor, dword1 - */ -static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings) -{ - switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) { - case SMPT_CMD_ADDRESS_LEN_0: - return 0; - case SMPT_CMD_ADDRESS_LEN_3: - return 3; - case SMPT_CMD_ADDRESS_LEN_4: - return 4; - case SMPT_CMD_ADDRESS_LEN_USE_CURRENT: - /* fall through */ - default: - return nor->addr_width; - } -} - -/** - * spi_nor_smpt_read_dummy() - return the configuration detection command read - * latency, in clock cycles. - * @nor: pointer to a 'struct spi_nor' - * @settings: configuration detection command descriptor, dword1 - * - * Return: the number of dummy cycles for an SMPT read - */ -static u8 spi_nor_smpt_read_dummy(const struct spi_nor *nor, const u32 settings) -{ - u8 read_dummy = SMPT_CMD_READ_DUMMY(settings); - - if (read_dummy == SMPT_CMD_READ_DUMMY_IS_VARIABLE) - return nor->read_dummy; - return read_dummy; -} - -/** - * spi_nor_get_map_in_use() - get the configuration map in use - * @nor: pointer to a 'struct spi_nor' - * @smpt: pointer to the sector map parameter table - * @smpt_len: sector map parameter table length - * - * Return: pointer to the map in use, ERR_PTR(-errno) otherwise. - */ -static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, - u8 smpt_len) -{ - const u32 *ret; - u8 *buf; - u32 addr; - int err; - u8 i; - u8 addr_width, read_opcode, read_dummy; - u8 read_data_mask, map_id; - - /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */ - buf = kmalloc(sizeof(*buf), GFP_KERNEL); - if (!buf) - return ERR_PTR(-ENOMEM); - - addr_width = nor->addr_width; - read_dummy = nor->read_dummy; - read_opcode = nor->read_opcode; - - map_id = 0; - /* Determine if there are any optional Detection Command Descriptors */ - for (i = 0; i < smpt_len; i += 2) { - if (smpt[i] & SMPT_DESC_TYPE_MAP) - break; - - read_data_mask = SMPT_CMD_READ_DATA(smpt[i]); - nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]); - nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]); - nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]); - addr = smpt[i + 1]; - - err = spi_nor_read_raw(nor, addr, 1, buf); - if (err) { - ret = ERR_PTR(err); - goto out; - } - - /* - * Build an index value that is used to select the Sector Map - * Configuration that is currently in use. - */ - map_id = map_id << 1 | !!(*buf & read_data_mask); - } - - /* - * If command descriptors are provided, they always precede map - * descriptors in the table. There is no need to start the iteration - * over smpt array all over again. - * - * Find the matching configuration map. - */ - ret = ERR_PTR(-EINVAL); - while (i < smpt_len) { - if (SMPT_MAP_ID(smpt[i]) == map_id) { - ret = smpt + i; - break; - } - - /* - * If there are no more configuration map descriptors and no - * configuration ID matched the configuration identifier, the - * sector address map is unknown. - */ - if (smpt[i] & SMPT_DESC_END) - break; - - /* increment the table index to the next map */ - i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1; - } - - /* fall through */ -out: - kfree(buf); - nor->addr_width = addr_width; - nor->read_dummy = read_dummy; - nor->read_opcode = read_opcode; - return ret; -} - -/** - * spi_nor_region_check_overlay() - set overlay bit when the region is overlaid - * @region: pointer to a structure that describes a SPI NOR erase region - * @erase: pointer to a structure that describes a SPI NOR erase type - * @erase_type: erase type bitmask - */ -static void -spi_nor_region_check_overlay(struct spi_nor_erase_region *region, - const struct spi_nor_erase_type *erase, - const u8 erase_type) -{ - int i; - - for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) { - if (!(erase_type & BIT(i))) - continue; - if (region->size & erase[i].size_mask) { - spi_nor_region_mark_overlay(region); - return; - } - } -} - -/** - * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map - * @nor: pointer to a 'struct spi_nor' - * @params: pointer to a duplicate 'struct spi_nor_flash_parameter' that is - * used for storing SFDP parsed data - * @smpt: pointer to the sector map parameter table - * - * Return: 0 on success, -errno otherwise. - */ -static int -spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, - struct spi_nor_flash_parameter *params, - const u32 *smpt) -{ - struct spi_nor_erase_map *map = ¶ms->erase_map; - struct spi_nor_erase_type *erase = map->erase_type; - struct spi_nor_erase_region *region; - u64 offset; - u32 region_count; - int i, j; - u8 uniform_erase_type, save_uniform_erase_type; - u8 erase_type, regions_erase_type; - - region_count = SMPT_MAP_REGION_COUNT(*smpt); - /* - * The regions will be freed when the driver detaches from the - * device. - */ - region = devm_kcalloc(nor->dev, region_count, sizeof(*region), - GFP_KERNEL); - if (!region) - return -ENOMEM; - map->regions = region; - - uniform_erase_type = 0xff; - regions_erase_type = 0; - offset = 0; - /* Populate regions. */ - for (i = 0; i < region_count; i++) { - j = i + 1; /* index for the region dword */ - region[i].size = SMPT_MAP_REGION_SIZE(smpt[j]); - erase_type = SMPT_MAP_REGION_ERASE_TYPE(smpt[j]); - region[i].offset = offset | erase_type; - - spi_nor_region_check_overlay(®ion[i], erase, erase_type); - - /* - * Save the erase types that are supported in all regions and - * can erase the entire flash memory. - */ - uniform_erase_type &= erase_type; - - /* - * regions_erase_type mask will indicate all the erase types - * supported in this configuration map. - */ - regions_erase_type |= erase_type; - - offset = (region[i].offset & ~SNOR_ERASE_FLAGS_MASK) + - region[i].size; - } - - save_uniform_erase_type = map->uniform_erase_type; - map->uniform_erase_type = spi_nor_sort_erase_mask(map, - uniform_erase_type); - - if (!regions_erase_type) { - /* - * Roll back to the previous uniform_erase_type mask, SMPT is - * broken. - */ - map->uniform_erase_type = save_uniform_erase_type; - return -EINVAL; - } - - /* - * BFPT advertises all the erase types supported by all the possible - * map configurations. Mask out the erase types that are not supported - * by the current map configuration. - */ - for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) - if (!(regions_erase_type & BIT(erase[i].idx))) - spi_nor_set_erase_type(&erase[i], 0, 0xFF); - - spi_nor_region_mark_end(®ion[i - 1]); - - return 0; -} - -/** - * spi_nor_parse_smpt() - parse Sector Map Parameter Table - * @nor: pointer to a 'struct spi_nor' - * @smpt_header: sector map parameter table header - * @params: pointer to a duplicate 'struct spi_nor_flash_parameter' - * that is used for storing SFDP parsed data - * - * This table is optional, but when available, we parse it to identify the - * location and size of sectors within the main data array of the flash memory - * device and to identify which Erase Types are supported by each sector. - * - * Return: 0 on success, -errno otherwise. - */ -static int spi_nor_parse_smpt(struct spi_nor *nor, - const struct sfdp_parameter_header *smpt_header, - struct spi_nor_flash_parameter *params) -{ - const u32 *sector_map; - u32 *smpt; - size_t len; - u32 addr; - int ret; - - /* Read the Sector Map Parameter Table. */ - len = smpt_header->length * sizeof(*smpt); - smpt = kmalloc(len, GFP_KERNEL); - if (!smpt) - return -ENOMEM; - - addr = SFDP_PARAM_HEADER_PTP(smpt_header); - ret = spi_nor_read_sfdp(nor, addr, len, smpt); - if (ret) - goto out; - - /* Fix endianness of the SMPT DWORDs. */ - le32_to_cpu_array(smpt, smpt_header->length); - - sector_map = spi_nor_get_map_in_use(nor, smpt, smpt_header->length); - if (IS_ERR(sector_map)) { - ret = PTR_ERR(sector_map); - goto out; - } - - ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map); - if (ret) - goto out; - - spi_nor_regions_sort_erase_types(¶ms->erase_map); - /* fall through */ -out: - kfree(smpt); - return ret; -} - -#define SFDP_4BAIT_DWORD_MAX 2 - -struct sfdp_4bait { - /* The hardware capability. */ - u32 hwcaps; - - /* - * The bit in DWORD1 of the 4BAIT tells us whether - * the associated 4-byte address op code is supported. - */ - u32 supported_bit; -}; - -/** - * spi_nor_parse_4bait() - parse the 4-Byte Address Instruction Table - * @nor: pointer to a 'struct spi_nor'. - * @param_header: pointer to the 'struct sfdp_parameter_header' describing - * the 4-Byte Address Instruction Table length and version. - * @params: pointer to the 'struct spi_nor_flash_parameter' to be. - * - * Return: 0 on success, -errno otherwise. - */ -static int spi_nor_parse_4bait(struct spi_nor *nor, - const struct sfdp_parameter_header *param_header, - struct spi_nor_flash_parameter *params) -{ - static const struct sfdp_4bait reads[] = { - { SNOR_HWCAPS_READ, BIT(0) }, - { SNOR_HWCAPS_READ_FAST, BIT(1) }, - { SNOR_HWCAPS_READ_1_1_2, BIT(2) }, - { SNOR_HWCAPS_READ_1_2_2, BIT(3) }, - { SNOR_HWCAPS_READ_1_1_4, BIT(4) }, - { SNOR_HWCAPS_READ_1_4_4, BIT(5) }, - { SNOR_HWCAPS_READ_1_1_1_DTR, BIT(13) }, - { SNOR_HWCAPS_READ_1_2_2_DTR, BIT(14) }, - { SNOR_HWCAPS_READ_1_4_4_DTR, BIT(15) }, - }; - static const struct sfdp_4bait programs[] = { - { SNOR_HWCAPS_PP, BIT(6) }, - { SNOR_HWCAPS_PP_1_1_4, BIT(7) }, - { SNOR_HWCAPS_PP_1_4_4, BIT(8) }, - }; - static const struct sfdp_4bait erases[SNOR_ERASE_TYPE_MAX] = { - { 0u /* not used */, BIT(9) }, - { 0u /* not used */, BIT(10) }, - { 0u /* not used */, BIT(11) }, - { 0u /* not used */, BIT(12) }, - }; - struct spi_nor_pp_command *params_pp = params->page_programs; - struct spi_nor_erase_map *map = ¶ms->erase_map; - struct spi_nor_erase_type *erase_type = map->erase_type; - u32 *dwords; - size_t len; - u32 addr, discard_hwcaps, read_hwcaps, pp_hwcaps, erase_mask; - int i, ret; - - if (param_header->major != SFDP_JESD216_MAJOR || - param_header->length < SFDP_4BAIT_DWORD_MAX) - return -EINVAL; - - /* Read the 4-byte Address Instruction Table. */ - len = sizeof(*dwords) * SFDP_4BAIT_DWORD_MAX; - - /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */ - dwords = kmalloc(len, GFP_KERNEL); - if (!dwords) - return -ENOMEM; - - addr = SFDP_PARAM_HEADER_PTP(param_header); - ret = spi_nor_read_sfdp(nor, addr, len, dwords); - if (ret) - goto out; - - /* Fix endianness of the 4BAIT DWORDs. */ - le32_to_cpu_array(dwords, SFDP_4BAIT_DWORD_MAX); - - /* - * Compute the subset of (Fast) Read commands for which the 4-byte - * version is supported. - */ - discard_hwcaps = 0; - read_hwcaps = 0; - for (i = 0; i < ARRAY_SIZE(reads); i++) { - const struct sfdp_4bait *read = &reads[i]; - - discard_hwcaps |= read->hwcaps; - if ((params->hwcaps.mask & read->hwcaps) && - (dwords[0] & read->supported_bit)) - read_hwcaps |= read->hwcaps; - } - - /* - * Compute the subset of Page Program commands for which the 4-byte - * version is supported. - */ - pp_hwcaps = 0; - for (i = 0; i < ARRAY_SIZE(programs); i++) { - const struct sfdp_4bait *program = &programs[i]; - - /* - * The 4 Byte Address Instruction (Optional) Table is the only - * SFDP table that indicates support for Page Program Commands. - * Bypass the params->hwcaps.mask and consider 4BAIT the biggest - * authority for specifying Page Program support. - */ - discard_hwcaps |= program->hwcaps; - if (dwords[0] & program->supported_bit) - pp_hwcaps |= program->hwcaps; - } - - /* - * Compute the subset of Sector Erase commands for which the 4-byte - * version is supported. - */ - erase_mask = 0; - for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) { - const struct sfdp_4bait *erase = &erases[i]; - - if (dwords[0] & erase->supported_bit) - erase_mask |= BIT(i); - } - - /* Replicate the sort done for the map's erase types in BFPT. */ - erase_mask = spi_nor_sort_erase_mask(map, erase_mask); - - /* - * We need at least one 4-byte op code per read, program and erase - * operation; the .read(), .write() and .erase() hooks share the - * nor->addr_width value. - */ - if (!read_hwcaps || !pp_hwcaps || !erase_mask) - goto out; - - /* - * Discard all operations from the 4-byte instruction set which are - * not supported by this memory. - */ - params->hwcaps.mask &= ~discard_hwcaps; - params->hwcaps.mask |= (read_hwcaps | pp_hwcaps); - - /* Use the 4-byte address instruction set. */ - for (i = 0; i < SNOR_CMD_READ_MAX; i++) { - struct spi_nor_read_command *read_cmd = ¶ms->reads[i]; - - read_cmd->opcode = spi_nor_convert_3to4_read(read_cmd->opcode); - } - - /* 4BAIT is the only SFDP table that indicates page program support. */ - if (pp_hwcaps & SNOR_HWCAPS_PP) - spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP], - SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1); - if (pp_hwcaps & SNOR_HWCAPS_PP_1_1_4) - spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_1_4], - SPINOR_OP_PP_1_1_4_4B, - SNOR_PROTO_1_1_4); - if (pp_hwcaps & SNOR_HWCAPS_PP_1_4_4) - spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_4_4], - SPINOR_OP_PP_1_4_4_4B, - SNOR_PROTO_1_4_4); - - for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) { - if (erase_mask & BIT(i)) - erase_type[i].opcode = (dwords[1] >> - erase_type[i].idx * 8) & 0xFF; - else - spi_nor_set_erase_type(&erase_type[i], 0u, 0xFF); - } - - /* - * We set SNOR_F_HAS_4BAIT in order to skip spi_nor_set_4byte_opcodes() - * later because we already did the conversion to 4byte opcodes. Also, - * this latest function implements a legacy quirk for the erase size of - * Spansion memory. However this quirk is no longer needed with new - * SFDP compliant memories. - */ - nor->addr_width = 4; - nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT; - - /* fall through */ -out: - kfree(dwords); - return ret; -} - -/** - * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters. - * @nor: pointer to a 'struct spi_nor' - * @params: pointer to the 'struct spi_nor_flash_parameter' to be - * filled - * - * The Serial Flash Discoverable Parameters are described by the JEDEC JESD216 - * specification. This is a standard which tends to supported by almost all - * (Q)SPI memory manufacturers. Those hard-coded tables allow us to learn at - * runtime the main parameters needed to perform basic SPI flash operations such - * as Fast Read, Page Program or Sector Erase commands. - * - * Return: 0 on success, -errno otherwise. - */ -static int spi_nor_parse_sfdp(struct spi_nor *nor, - struct spi_nor_flash_parameter *params) -{ - const struct sfdp_parameter_header *param_header, *bfpt_header; - struct sfdp_parameter_header *param_headers = NULL; - struct sfdp_header header; - struct device *dev = nor->dev; - size_t psize; - int i, err; - - /* Get the SFDP header. */ - err = spi_nor_read_sfdp_dma_unsafe(nor, 0, sizeof(header), &header); - if (err < 0) - return err; - - /* Check the SFDP header version. */ - if (le32_to_cpu(header.signature) != SFDP_SIGNATURE || - header.major != SFDP_JESD216_MAJOR) - return -EINVAL; - - /* - * Verify that the first and only mandatory parameter header is a - * Basic Flash Parameter Table header as specified in JESD216. - */ - bfpt_header = &header.bfpt_header; - if (SFDP_PARAM_HEADER_ID(bfpt_header) != SFDP_BFPT_ID || - bfpt_header->major != SFDP_JESD216_MAJOR) - return -EINVAL; - - /* - * Allocate memory then read all parameter headers with a single - * Read SFDP command. These parameter headers will actually be parsed - * twice: a first time to get the latest revision of the basic flash - * parameter table, then a second time to handle the supported optional - * tables. - * Hence we read the parameter headers once for all to reduce the - * processing time. Also we use kmalloc() instead of devm_kmalloc() - * because we don't need to keep these parameter headers: the allocated - * memory is always released with kfree() before exiting this function. - */ - if (header.nph) { - psize = header.nph * sizeof(*param_headers); - - param_headers = kmalloc(psize, GFP_KERNEL); - if (!param_headers) - return -ENOMEM; - - err = spi_nor_read_sfdp(nor, sizeof(header), - psize, param_headers); - if (err < 0) { - dev_dbg(dev, "failed to read SFDP parameter headers\n"); - goto exit; - } - } - - /* - * Check other parameter headers to get the latest revision of - * the basic flash parameter table. - */ - for (i = 0; i < header.nph; i++) { - param_header = ¶m_headers[i]; - - if (SFDP_PARAM_HEADER_ID(param_header) == SFDP_BFPT_ID && - param_header->major == SFDP_JESD216_MAJOR && - (param_header->minor > bfpt_header->minor || - (param_header->minor == bfpt_header->minor && - param_header->length > bfpt_header->length))) - bfpt_header = param_header; - } - - err = spi_nor_parse_bfpt(nor, bfpt_header, params); - if (err) - goto exit; - - /* Parse optional parameter tables. */ - for (i = 0; i < header.nph; i++) { - param_header = ¶m_headers[i]; - - switch (SFDP_PARAM_HEADER_ID(param_header)) { - case SFDP_SECTOR_MAP_ID: - err = spi_nor_parse_smpt(nor, param_header, params); - break; - - case SFDP_4BAIT_ID: - err = spi_nor_parse_4bait(nor, param_header, params); - break; - - default: - break; - } - - if (err) { - dev_warn(dev, "Failed to parse optional parameter table: %04x\n", - SFDP_PARAM_HEADER_ID(param_header)); - /* - * Let's not drop all information we extracted so far - * if optional table parsers fail. In case of failing, - * each optional parser is responsible to roll back to - * the previously known spi_nor data. - */ - err = 0; - } - } - -exit: - kfree(param_headers); - return err; -} - static int spi_nor_select_read(struct spi_nor *nor, u32 shared_hwcaps) { diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h new file mode 100644 index 000000000000..e1256fe50d12 --- /dev/null +++ b/drivers/mtd/spi-nor/core.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2005, Intec Automation Inc. + * Copyright (C) 2014, Freescale Semiconductor, Inc. + */ + +#ifndef __LINUX_MTD_SPI_NOR_INTERNAL_H +#define __LINUX_MTD_SPI_NOR_INTERNAL_H + +#include "sfdp.h" + +int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor); +int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor); +int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor); + +ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, + u8 *buf); + +int spi_nor_hwcaps_read2cmd(u32 hwcaps); +u8 spi_nor_convert_3to4_read(u8 opcode); +void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode, + enum spi_nor_protocol proto); + +void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size, + u8 opcode); +struct spi_nor_erase_region * +spi_nor_region_next(struct spi_nor_erase_region *region); +void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map, + u8 erase_mask, u64 flash_size); + +int spi_nor_post_bfpt_fixups(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params); + +#endif /* __LINUX_MTD_SPI_NOR_INTERNAL_H */ diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c new file mode 100644 index 000000000000..b790c3ec871f --- /dev/null +++ b/drivers/mtd/spi-nor/sfdp.c @@ -0,0 +1,1196 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2005, Intec Automation Inc. + * Copyright (C) 2014, Freescale Semiconductor, Inc. + */ + +#include +#include +#include + +#include "core.h" + +#define SFDP_PARAM_HEADER_ID(p) (((p)->id_msb << 8) | (p)->id_lsb) +#define SFDP_PARAM_HEADER_PTP(p) \ + (((p)->parameter_table_pointer[2] << 16) | \ + ((p)->parameter_table_pointer[1] << 8) | \ + ((p)->parameter_table_pointer[0] << 0)) + +#define SFDP_BFPT_ID 0xff00 /* Basic Flash Parameter Table */ +#define SFDP_SECTOR_MAP_ID 0xff81 /* Sector Map Table */ +#define SFDP_4BAIT_ID 0xff84 /* 4-byte Address Instruction Table */ + +#define SFDP_SIGNATURE 0x50444653U +#define SFDP_JESD216_MAJOR 1 +#define SFDP_JESD216_MINOR 0 +#define SFDP_JESD216A_MINOR 5 +#define SFDP_JESD216B_MINOR 6 + +struct sfdp_header { + u32 signature; /* Ox50444653U <=> "SFDP" */ + u8 minor; + u8 major; + u8 nph; /* 0-base number of parameter headers */ + u8 unused; + + /* Basic Flash Parameter Table. */ + struct sfdp_parameter_header bfpt_header; +}; + +/* Fast Read settings. */ +struct sfdp_bfpt_read { + /* The Fast Read x-y-z hardware capability in params->hwcaps.mask. */ + u32 hwcaps; + + /* + * The bit in BFPT DWORD tells us + * whether the Fast Read x-y-z command is supported. + */ + u32 supported_dword; + u32 supported_bit; + + /* + * The half-word at offset in BFPT DWORD + * encodes the op code, the number of mode clocks and the number of wait + * states to be used by Fast Read x-y-z command. + */ + u32 settings_dword; + u32 settings_shift; + + /* The SPI protocol for this Fast Read x-y-z command. */ + enum spi_nor_protocol proto; +}; + +struct sfdp_bfpt_erase { + /* + * The half-word at offset in DWORD encodes the + * op code and erase sector size to be used by Sector Erase commands. + */ + u32 dword; + u32 shift; +}; + +#define SMPT_CMD_ADDRESS_LEN_MASK GENMASK(23, 22) +#define SMPT_CMD_ADDRESS_LEN_0 (0x0UL << 22) +#define SMPT_CMD_ADDRESS_LEN_3 (0x1UL << 22) +#define SMPT_CMD_ADDRESS_LEN_4 (0x2UL << 22) +#define SMPT_CMD_ADDRESS_LEN_USE_CURRENT (0x3UL << 22) + +#define SMPT_CMD_READ_DUMMY_MASK GENMASK(19, 16) +#define SMPT_CMD_READ_DUMMY_SHIFT 16 +#define SMPT_CMD_READ_DUMMY(_cmd) \ + (((_cmd) & SMPT_CMD_READ_DUMMY_MASK) >> SMPT_CMD_READ_DUMMY_SHIFT) +#define SMPT_CMD_READ_DUMMY_IS_VARIABLE 0xfUL + +#define SMPT_CMD_READ_DATA_MASK GENMASK(31, 24) +#define SMPT_CMD_READ_DATA_SHIFT 24 +#define SMPT_CMD_READ_DATA(_cmd) \ + (((_cmd) & SMPT_CMD_READ_DATA_MASK) >> SMPT_CMD_READ_DATA_SHIFT) + +#define SMPT_CMD_OPCODE_MASK GENMASK(15, 8) +#define SMPT_CMD_OPCODE_SHIFT 8 +#define SMPT_CMD_OPCODE(_cmd) \ + (((_cmd) & SMPT_CMD_OPCODE_MASK) >> SMPT_CMD_OPCODE_SHIFT) + +#define SMPT_MAP_REGION_COUNT_MASK GENMASK(23, 16) +#define SMPT_MAP_REGION_COUNT_SHIFT 16 +#define SMPT_MAP_REGION_COUNT(_header) \ + ((((_header) & SMPT_MAP_REGION_COUNT_MASK) >> \ + SMPT_MAP_REGION_COUNT_SHIFT) + 1) + +#define SMPT_MAP_ID_MASK GENMASK(15, 8) +#define SMPT_MAP_ID_SHIFT 8 +#define SMPT_MAP_ID(_header) \ + (((_header) & SMPT_MAP_ID_MASK) >> SMPT_MAP_ID_SHIFT) + +#define SMPT_MAP_REGION_SIZE_MASK GENMASK(31, 8) +#define SMPT_MAP_REGION_SIZE_SHIFT 8 +#define SMPT_MAP_REGION_SIZE(_region) \ + (((((_region) & SMPT_MAP_REGION_SIZE_MASK) >> \ + SMPT_MAP_REGION_SIZE_SHIFT) + 1) * 256) + +#define SMPT_MAP_REGION_ERASE_TYPE_MASK GENMASK(3, 0) +#define SMPT_MAP_REGION_ERASE_TYPE(_region) \ + ((_region) & SMPT_MAP_REGION_ERASE_TYPE_MASK) + +#define SMPT_DESC_TYPE_MAP BIT(1) +#define SMPT_DESC_END BIT(0) + +#define SFDP_4BAIT_DWORD_MAX 2 + +struct sfdp_4bait { + /* The hardware capability. */ + u32 hwcaps; + + /* + * The bit in DWORD1 of the 4BAIT tells us whether + * the associated 4-byte address op code is supported. + */ + u32 supported_bit; +}; + +/** + * spi_nor_read_raw() - raw read of serial flash memory. read_opcode, + * addr_width and read_dummy members of the struct spi_nor + * should be previously + * set. + * @nor: pointer to a 'struct spi_nor' + * @addr: offset in the serial flash memory + * @len: number of bytes to read + * @buf: buffer where the data is copied into (dma-safe memory) + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf) +{ + ssize_t ret; + + while (len) { + ret = spi_nor_read_data(nor, addr, len, buf); + if (ret < 0) + return ret; + if (!ret || ret > len) + return -EIO; + + buf += ret; + addr += ret; + len -= ret; + } + return 0; +} + +/** + * spi_nor_read_sfdp() - read Serial Flash Discoverable Parameters. + * @nor: pointer to a 'struct spi_nor' + * @addr: offset in the SFDP area to start reading data from + * @len: number of bytes to read + * @buf: buffer where the SFDP data are copied into (dma-safe memory) + * + * Whatever the actual numbers of bytes for address and dummy cycles are + * for (Fast) Read commands, the Read SFDP (5Ah) instruction is always + * followed by a 3-byte address and 8 dummy clock cycles. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr, + size_t len, void *buf) +{ + u8 addr_width, read_opcode, read_dummy; + int ret; + + read_opcode = nor->read_opcode; + addr_width = nor->addr_width; + read_dummy = nor->read_dummy; + + nor->read_opcode = SPINOR_OP_RDSFDP; + nor->addr_width = 3; + nor->read_dummy = 8; + + ret = spi_nor_read_raw(nor, addr, len, buf); + + nor->read_opcode = read_opcode; + nor->addr_width = addr_width; + nor->read_dummy = read_dummy; + + return ret; +} + +/** + * spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters. + * @nor: pointer to a 'struct spi_nor' + * @addr: offset in the SFDP area to start reading data from + * @len: number of bytes to read + * @buf: buffer where the SFDP data are copied into + * + * Wrap spi_nor_read_sfdp() using a kmalloc'ed bounce buffer as @buf is now not + * guaranteed to be dma-safe. + * + * Return: -ENOMEM if kmalloc() fails, the return code of spi_nor_read_sfdp() + * otherwise. + */ +static int spi_nor_read_sfdp_dma_unsafe(struct spi_nor *nor, u32 addr, + size_t len, void *buf) +{ + void *dma_safe_buf; + int ret; + + dma_safe_buf = kmalloc(len, GFP_KERNEL); + if (!dma_safe_buf) + return -ENOMEM; + + ret = spi_nor_read_sfdp(nor, addr, len, dma_safe_buf); + memcpy(buf, dma_safe_buf, len); + kfree(dma_safe_buf); + + return ret; +} + +static void +spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read, + u16 half, + enum spi_nor_protocol proto) +{ + read->num_mode_clocks = (half >> 5) & 0x07; + read->num_wait_states = (half >> 0) & 0x1f; + read->opcode = (half >> 8) & 0xff; + read->proto = proto; +} + +static const struct sfdp_bfpt_read sfdp_bfpt_reads[] = { + /* Fast Read 1-1-2 */ + { + SNOR_HWCAPS_READ_1_1_2, + BFPT_DWORD(1), BIT(16), /* Supported bit */ + BFPT_DWORD(4), 0, /* Settings */ + SNOR_PROTO_1_1_2, + }, + + /* Fast Read 1-2-2 */ + { + SNOR_HWCAPS_READ_1_2_2, + BFPT_DWORD(1), BIT(20), /* Supported bit */ + BFPT_DWORD(4), 16, /* Settings */ + SNOR_PROTO_1_2_2, + }, + + /* Fast Read 2-2-2 */ + { + SNOR_HWCAPS_READ_2_2_2, + BFPT_DWORD(5), BIT(0), /* Supported bit */ + BFPT_DWORD(6), 16, /* Settings */ + SNOR_PROTO_2_2_2, + }, + + /* Fast Read 1-1-4 */ + { + SNOR_HWCAPS_READ_1_1_4, + BFPT_DWORD(1), BIT(22), /* Supported bit */ + BFPT_DWORD(3), 16, /* Settings */ + SNOR_PROTO_1_1_4, + }, + + /* Fast Read 1-4-4 */ + { + SNOR_HWCAPS_READ_1_4_4, + BFPT_DWORD(1), BIT(21), /* Supported bit */ + BFPT_DWORD(3), 0, /* Settings */ + SNOR_PROTO_1_4_4, + }, + + /* Fast Read 4-4-4 */ + { + SNOR_HWCAPS_READ_4_4_4, + BFPT_DWORD(5), BIT(4), /* Supported bit */ + BFPT_DWORD(7), 16, /* Settings */ + SNOR_PROTO_4_4_4, + }, +}; + +static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = { + /* Erase Type 1 in DWORD8 bits[15:0] */ + {BFPT_DWORD(8), 0}, + + /* Erase Type 2 in DWORD8 bits[31:16] */ + {BFPT_DWORD(8), 16}, + + /* Erase Type 3 in DWORD9 bits[15:0] */ + {BFPT_DWORD(9), 0}, + + /* Erase Type 4 in DWORD9 bits[31:16] */ + {BFPT_DWORD(9), 16}, +}; + +/** + * spi_nor_set_erase_settings_from_bfpt() - set erase type settings from BFPT + * @erase: pointer to a structure that describes a SPI NOR erase type + * @size: the size of the sector/block erased by the erase type + * @opcode: the SPI command op code to erase the sector/block + * @i: erase type index as sorted in the Basic Flash Parameter Table + * + * The supported Erase Types will be sorted at init in ascending order, with + * the smallest Erase Type size being the first member in the erase_type array + * of the spi_nor_erase_map structure. Save the Erase Type index as sorted in + * the Basic Flash Parameter Table since it will be used later on to + * synchronize with the supported Erase Types defined in SFDP optional tables. + */ +static void +spi_nor_set_erase_settings_from_bfpt(struct spi_nor_erase_type *erase, + u32 size, u8 opcode, u8 i) +{ + erase->idx = i; + spi_nor_set_erase_type(erase, size, opcode); +} + +/** + * spi_nor_map_cmp_erase_type() - compare the map's erase types by size + * @l: member in the left half of the map's erase_type array + * @r: member in the right half of the map's erase_type array + * + * Comparison function used in the sort() call to sort in ascending order the + * map's erase types, the smallest erase type size being the first member in the + * sorted erase_type array. + * + * Return: the result of @l->size - @r->size + */ +static int spi_nor_map_cmp_erase_type(const void *l, const void *r) +{ + const struct spi_nor_erase_type *left = l, *right = r; + + return left->size - right->size; +} + +/** + * spi_nor_sort_erase_mask() - sort erase mask + * @map: the erase map of the SPI NOR + * @erase_mask: the erase type mask to be sorted + * + * Replicate the sort done for the map's erase types in BFPT: sort the erase + * mask in ascending order with the smallest erase type size starting from + * BIT(0) in the sorted erase mask. + * + * Return: sorted erase mask. + */ +static u8 spi_nor_sort_erase_mask(struct spi_nor_erase_map *map, u8 erase_mask) +{ + struct spi_nor_erase_type *erase_type = map->erase_type; + int i; + u8 sorted_erase_mask = 0; + + if (!erase_mask) + return 0; + + /* Replicate the sort done for the map's erase types. */ + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) + if (erase_type[i].size && erase_mask & BIT(erase_type[i].idx)) + sorted_erase_mask |= BIT(i); + + return sorted_erase_mask; +} + +/** + * spi_nor_regions_sort_erase_types() - sort erase types in each region + * @map: the erase map of the SPI NOR + * + * Function assumes that the erase types defined in the erase map are already + * sorted in ascending order, with the smallest erase type size being the first + * member in the erase_type array. It replicates the sort done for the map's + * erase types. Each region's erase bitmask will indicate which erase types are + * supported from the sorted erase types defined in the erase map. + * Sort the all region's erase type at init in order to speed up the process of + * finding the best erase command at runtime. + */ +static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map) +{ + struct spi_nor_erase_region *region = map->regions; + u8 region_erase_mask, sorted_erase_mask; + + while (region) { + region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK; + + sorted_erase_mask = spi_nor_sort_erase_mask(map, + region_erase_mask); + + /* Overwrite erase mask. */ + region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) | + sorted_erase_mask; + + region = spi_nor_region_next(region); + } +} + +/** + * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table. + * @nor: pointer to a 'struct spi_nor' + * @bfpt_header: pointer to the 'struct sfdp_parameter_header' describing + * the Basic Flash Parameter Table length and version + * @params: pointer to the 'struct spi_nor_flash_parameter' to be + * filled + * + * The Basic Flash Parameter Table is the main and only mandatory table as + * defined by the SFDP (JESD216) specification. + * It provides us with the total size (memory density) of the data array and + * the number of address bytes for Fast Read, Page Program and Sector Erase + * commands. + * For Fast READ commands, it also gives the number of mode clock cycles and + * wait states (regrouped in the number of dummy clock cycles) for each + * supported instruction op code. + * For Page Program, the page size is now available since JESD216 rev A, however + * the supported instruction op codes are still not provided. + * For Sector Erase commands, this table stores the supported instruction op + * codes and the associated sector sizes. + * Finally, the Quad Enable Requirements (QER) are also available since JESD216 + * rev A. The QER bits encode the manufacturer dependent procedure to be + * executed to set the Quad Enable (QE) bit in some internal register of the + * Quad SPI memory. Indeed the QE bit, when it exists, must be set before + * sending any Quad SPI command to the memory. Actually, setting the QE bit + * tells the memory to reassign its WP# and HOLD#/RESET# pins to functions IO2 + * and IO3 hence enabling 4 (Quad) I/O lines. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_parse_bfpt(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + struct spi_nor_flash_parameter *params) +{ + struct spi_nor_erase_map *map = ¶ms->erase_map; + struct spi_nor_erase_type *erase_type = map->erase_type; + struct sfdp_bfpt bfpt; + size_t len; + int i, cmd, err; + u32 addr; + u16 half; + u8 erase_mask; + + /* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */ + if (bfpt_header->length < BFPT_DWORD_MAX_JESD216) + return -EINVAL; + + /* Read the Basic Flash Parameter Table. */ + len = min_t(size_t, sizeof(bfpt), + bfpt_header->length * sizeof(u32)); + addr = SFDP_PARAM_HEADER_PTP(bfpt_header); + memset(&bfpt, 0, sizeof(bfpt)); + err = spi_nor_read_sfdp_dma_unsafe(nor, addr, len, &bfpt); + if (err < 0) + return err; + + /* Fix endianness of the BFPT DWORDs. */ + le32_to_cpu_array(bfpt.dwords, BFPT_DWORD_MAX); + + /* Number of address bytes. */ + switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) { + case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY: + nor->addr_width = 3; + break; + + case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY: + nor->addr_width = 4; + break; + + default: + break; + } + + /* Flash Memory Density (in bits). */ + params->size = bfpt.dwords[BFPT_DWORD(2)]; + if (params->size & BIT(31)) { + params->size &= ~BIT(31); + + /* + * Prevent overflows on params->size. Anyway, a NOR of 2^64 + * bits is unlikely to exist so this error probably means + * the BFPT we are reading is corrupted/wrong. + */ + if (params->size > 63) + return -EINVAL; + + params->size = 1ULL << params->size; + } else { + params->size++; + } + params->size >>= 3; /* Convert to bytes. */ + + /* Fast Read settings. */ + for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_reads); i++) { + const struct sfdp_bfpt_read *rd = &sfdp_bfpt_reads[i]; + struct spi_nor_read_command *read; + + if (!(bfpt.dwords[rd->supported_dword] & rd->supported_bit)) { + params->hwcaps.mask &= ~rd->hwcaps; + continue; + } + + params->hwcaps.mask |= rd->hwcaps; + cmd = spi_nor_hwcaps_read2cmd(rd->hwcaps); + read = ¶ms->reads[cmd]; + half = bfpt.dwords[rd->settings_dword] >> rd->settings_shift; + spi_nor_set_read_settings_from_bfpt(read, half, rd->proto); + } + + /* + * Sector Erase settings. Reinitialize the uniform erase map using the + * Erase Types defined in the bfpt table. + */ + erase_mask = 0; + memset(¶ms->erase_map, 0, sizeof(params->erase_map)); + for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) { + const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i]; + u32 erasesize; + u8 opcode; + + half = bfpt.dwords[er->dword] >> er->shift; + erasesize = half & 0xff; + + /* erasesize == 0 means this Erase Type is not supported. */ + if (!erasesize) + continue; + + erasesize = 1U << erasesize; + opcode = (half >> 8) & 0xff; + erase_mask |= BIT(i); + spi_nor_set_erase_settings_from_bfpt(&erase_type[i], erasesize, + opcode, i); + } + spi_nor_init_uniform_erase_map(map, erase_mask, params->size); + /* + * Sort all the map's Erase Types in ascending order with the smallest + * erase size being the first member in the erase_type array. + */ + sort(erase_type, SNOR_ERASE_TYPE_MAX, sizeof(erase_type[0]), + spi_nor_map_cmp_erase_type, NULL); + /* + * Sort the erase types in the uniform region in order to update the + * uniform_erase_type bitmask. The bitmask will be used later on when + * selecting the uniform erase. + */ + spi_nor_regions_sort_erase_types(map); + map->uniform_erase_type = map->uniform_region.offset & + SNOR_ERASE_TYPE_MASK; + + /* Stop here if not JESD216 rev A or later. */ + if (bfpt_header->length < BFPT_DWORD_MAX) + return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, + params); + + /* Page size: this field specifies 'N' so the page size = 2^N bytes. */ + params->page_size = bfpt.dwords[BFPT_DWORD(11)]; + params->page_size &= BFPT_DWORD11_PAGE_SIZE_MASK; + params->page_size >>= BFPT_DWORD11_PAGE_SIZE_SHIFT; + params->page_size = 1U << params->page_size; + + /* Quad Enable Requirements. */ + switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) { + case BFPT_DWORD15_QER_NONE: + params->quad_enable = NULL; + break; + + case BFPT_DWORD15_QER_SR2_BIT1_BUGGY: + /* + * Writing only one byte to the Status Register has the + * side-effect of clearing Status Register 2. + */ + case BFPT_DWORD15_QER_SR2_BIT1_NO_RD: + /* + * Read Configuration Register (35h) instruction is not + * supported. + */ + nor->flags |= SNOR_F_HAS_16BIT_SR | SNOR_F_NO_READ_CR; + params->quad_enable = spi_nor_sr2_bit1_quad_enable; + break; + + case BFPT_DWORD15_QER_SR1_BIT6: + nor->flags &= ~SNOR_F_HAS_16BIT_SR; + params->quad_enable = spi_nor_sr1_bit6_quad_enable; + break; + + case BFPT_DWORD15_QER_SR2_BIT7: + nor->flags &= ~SNOR_F_HAS_16BIT_SR; + params->quad_enable = spi_nor_sr2_bit7_quad_enable; + break; + + case BFPT_DWORD15_QER_SR2_BIT1: + /* + * JESD216 rev B or later does not specify if writing only one + * byte to the Status Register clears or not the Status + * Register 2, so let's be cautious and keep the default + * assumption of a 16-bit Write Status (01h) command. + */ + nor->flags |= SNOR_F_HAS_16BIT_SR; + + params->quad_enable = spi_nor_sr2_bit1_quad_enable; + break; + + default: + return -EINVAL; + } + + return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params); +} + +/** + * spi_nor_smpt_addr_width() - return the address width used in the + * configuration detection command. + * @nor: pointer to a 'struct spi_nor' + * @settings: configuration detection command descriptor, dword1 + */ +static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings) +{ + switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) { + case SMPT_CMD_ADDRESS_LEN_0: + return 0; + case SMPT_CMD_ADDRESS_LEN_3: + return 3; + case SMPT_CMD_ADDRESS_LEN_4: + return 4; + case SMPT_CMD_ADDRESS_LEN_USE_CURRENT: + /* fall through */ + default: + return nor->addr_width; + } +} + +/** + * spi_nor_smpt_read_dummy() - return the configuration detection command read + * latency, in clock cycles. + * @nor: pointer to a 'struct spi_nor' + * @settings: configuration detection command descriptor, dword1 + * + * Return: the number of dummy cycles for an SMPT read + */ +static u8 spi_nor_smpt_read_dummy(const struct spi_nor *nor, const u32 settings) +{ + u8 read_dummy = SMPT_CMD_READ_DUMMY(settings); + + if (read_dummy == SMPT_CMD_READ_DUMMY_IS_VARIABLE) + return nor->read_dummy; + return read_dummy; +} + +/** + * spi_nor_get_map_in_use() - get the configuration map in use + * @nor: pointer to a 'struct spi_nor' + * @smpt: pointer to the sector map parameter table + * @smpt_len: sector map parameter table length + * + * Return: pointer to the map in use, ERR_PTR(-errno) otherwise. + */ +static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, + u8 smpt_len) +{ + const u32 *ret; + u8 *buf; + u32 addr; + int err; + u8 i; + u8 addr_width, read_opcode, read_dummy; + u8 read_data_mask, map_id; + + /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */ + buf = kmalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + addr_width = nor->addr_width; + read_dummy = nor->read_dummy; + read_opcode = nor->read_opcode; + + map_id = 0; + /* Determine if there are any optional Detection Command Descriptors */ + for (i = 0; i < smpt_len; i += 2) { + if (smpt[i] & SMPT_DESC_TYPE_MAP) + break; + + read_data_mask = SMPT_CMD_READ_DATA(smpt[i]); + nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]); + nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]); + nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]); + addr = smpt[i + 1]; + + err = spi_nor_read_raw(nor, addr, 1, buf); + if (err) { + ret = ERR_PTR(err); + goto out; + } + + /* + * Build an index value that is used to select the Sector Map + * Configuration that is currently in use. + */ + map_id = map_id << 1 | !!(*buf & read_data_mask); + } + + /* + * If command descriptors are provided, they always precede map + * descriptors in the table. There is no need to start the iteration + * over smpt array all over again. + * + * Find the matching configuration map. + */ + ret = ERR_PTR(-EINVAL); + while (i < smpt_len) { + if (SMPT_MAP_ID(smpt[i]) == map_id) { + ret = smpt + i; + break; + } + + /* + * If there are no more configuration map descriptors and no + * configuration ID matched the configuration identifier, the + * sector address map is unknown. + */ + if (smpt[i] & SMPT_DESC_END) + break; + + /* increment the table index to the next map */ + i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1; + } + + /* fall through */ +out: + kfree(buf); + nor->addr_width = addr_width; + nor->read_dummy = read_dummy; + nor->read_opcode = read_opcode; + return ret; +} + +/** + * spi_nor_region_check_overlay() - set overlay bit when the region is overlaid + * @region: pointer to a structure that describes a SPI NOR erase region + * @erase: pointer to a structure that describes a SPI NOR erase type + * @erase_type: erase type bitmask + */ +static void +spi_nor_region_check_overlay(struct spi_nor_erase_region *region, + const struct spi_nor_erase_type *erase, + const u8 erase_type) +{ + int i; + + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) { + if (!(erase_type & BIT(i))) + continue; + if (region->size & erase[i].size_mask) { + spi_nor_region_mark_overlay(region); + return; + } + } +} + +/** + * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map + * @nor: pointer to a 'struct spi_nor' + * @params: pointer to a duplicate 'struct spi_nor_flash_parameter' that is + * used for storing SFDP parsed data + * @smpt: pointer to the sector map parameter table + * + * Return: 0 on success, -errno otherwise. + */ +static int +spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, + struct spi_nor_flash_parameter *params, + const u32 *smpt) +{ + struct spi_nor_erase_map *map = ¶ms->erase_map; + struct spi_nor_erase_type *erase = map->erase_type; + struct spi_nor_erase_region *region; + u64 offset; + u32 region_count; + int i, j; + u8 uniform_erase_type, save_uniform_erase_type; + u8 erase_type, regions_erase_type; + + region_count = SMPT_MAP_REGION_COUNT(*smpt); + /* + * The regions will be freed when the driver detaches from the + * device. + */ + region = devm_kcalloc(nor->dev, region_count, sizeof(*region), + GFP_KERNEL); + if (!region) + return -ENOMEM; + map->regions = region; + + uniform_erase_type = 0xff; + regions_erase_type = 0; + offset = 0; + /* Populate regions. */ + for (i = 0; i < region_count; i++) { + j = i + 1; /* index for the region dword */ + region[i].size = SMPT_MAP_REGION_SIZE(smpt[j]); + erase_type = SMPT_MAP_REGION_ERASE_TYPE(smpt[j]); + region[i].offset = offset | erase_type; + + spi_nor_region_check_overlay(®ion[i], erase, erase_type); + + /* + * Save the erase types that are supported in all regions and + * can erase the entire flash memory. + */ + uniform_erase_type &= erase_type; + + /* + * regions_erase_type mask will indicate all the erase types + * supported in this configuration map. + */ + regions_erase_type |= erase_type; + + offset = (region[i].offset & ~SNOR_ERASE_FLAGS_MASK) + + region[i].size; + } + + save_uniform_erase_type = map->uniform_erase_type; + map->uniform_erase_type = spi_nor_sort_erase_mask(map, + uniform_erase_type); + + if (!regions_erase_type) { + /* + * Roll back to the previous uniform_erase_type mask, SMPT is + * broken. + */ + map->uniform_erase_type = save_uniform_erase_type; + return -EINVAL; + } + + /* + * BFPT advertises all the erase types supported by all the possible + * map configurations. Mask out the erase types that are not supported + * by the current map configuration. + */ + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) + if (!(regions_erase_type & BIT(erase[i].idx))) + spi_nor_set_erase_type(&erase[i], 0, 0xFF); + + spi_nor_region_mark_end(®ion[i - 1]); + + return 0; +} + +/** + * spi_nor_parse_smpt() - parse Sector Map Parameter Table + * @nor: pointer to a 'struct spi_nor' + * @smpt_header: sector map parameter table header + * @params: pointer to a duplicate 'struct spi_nor_flash_parameter' + * that is used for storing SFDP parsed data + * + * This table is optional, but when available, we parse it to identify the + * location and size of sectors within the main data array of the flash memory + * device and to identify which Erase Types are supported by each sector. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_parse_smpt(struct spi_nor *nor, + const struct sfdp_parameter_header *smpt_header, + struct spi_nor_flash_parameter *params) +{ + const u32 *sector_map; + u32 *smpt; + size_t len; + u32 addr; + int ret; + + /* Read the Sector Map Parameter Table. */ + len = smpt_header->length * sizeof(*smpt); + smpt = kmalloc(len, GFP_KERNEL); + if (!smpt) + return -ENOMEM; + + addr = SFDP_PARAM_HEADER_PTP(smpt_header); + ret = spi_nor_read_sfdp(nor, addr, len, smpt); + if (ret) + goto out; + + /* Fix endianness of the SMPT DWORDs. */ + le32_to_cpu_array(smpt, smpt_header->length); + + sector_map = spi_nor_get_map_in_use(nor, smpt, smpt_header->length); + if (IS_ERR(sector_map)) { + ret = PTR_ERR(sector_map); + goto out; + } + + ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map); + if (ret) + goto out; + + spi_nor_regions_sort_erase_types(¶ms->erase_map); + /* fall through */ +out: + kfree(smpt); + return ret; +} + +/** + * spi_nor_parse_4bait() - parse the 4-Byte Address Instruction Table + * @nor: pointer to a 'struct spi_nor'. + * @param_header: pointer to the 'struct sfdp_parameter_header' describing + * the 4-Byte Address Instruction Table length and version. + * @params: pointer to the 'struct spi_nor_flash_parameter' to be. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_parse_4bait(struct spi_nor *nor, + const struct sfdp_parameter_header *param_header, + struct spi_nor_flash_parameter *params) +{ + static const struct sfdp_4bait reads[] = { + { SNOR_HWCAPS_READ, BIT(0) }, + { SNOR_HWCAPS_READ_FAST, BIT(1) }, + { SNOR_HWCAPS_READ_1_1_2, BIT(2) }, + { SNOR_HWCAPS_READ_1_2_2, BIT(3) }, + { SNOR_HWCAPS_READ_1_1_4, BIT(4) }, + { SNOR_HWCAPS_READ_1_4_4, BIT(5) }, + { SNOR_HWCAPS_READ_1_1_1_DTR, BIT(13) }, + { SNOR_HWCAPS_READ_1_2_2_DTR, BIT(14) }, + { SNOR_HWCAPS_READ_1_4_4_DTR, BIT(15) }, + }; + static const struct sfdp_4bait programs[] = { + { SNOR_HWCAPS_PP, BIT(6) }, + { SNOR_HWCAPS_PP_1_1_4, BIT(7) }, + { SNOR_HWCAPS_PP_1_4_4, BIT(8) }, + }; + static const struct sfdp_4bait erases[SNOR_ERASE_TYPE_MAX] = { + { 0u /* not used */, BIT(9) }, + { 0u /* not used */, BIT(10) }, + { 0u /* not used */, BIT(11) }, + { 0u /* not used */, BIT(12) }, + }; + struct spi_nor_pp_command *params_pp = params->page_programs; + struct spi_nor_erase_map *map = ¶ms->erase_map; + struct spi_nor_erase_type *erase_type = map->erase_type; + u32 *dwords; + size_t len; + u32 addr, discard_hwcaps, read_hwcaps, pp_hwcaps, erase_mask; + int i, ret; + + if (param_header->major != SFDP_JESD216_MAJOR || + param_header->length < SFDP_4BAIT_DWORD_MAX) + return -EINVAL; + + /* Read the 4-byte Address Instruction Table. */ + len = sizeof(*dwords) * SFDP_4BAIT_DWORD_MAX; + + /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */ + dwords = kmalloc(len, GFP_KERNEL); + if (!dwords) + return -ENOMEM; + + addr = SFDP_PARAM_HEADER_PTP(param_header); + ret = spi_nor_read_sfdp(nor, addr, len, dwords); + if (ret) + goto out; + + /* Fix endianness of the 4BAIT DWORDs. */ + le32_to_cpu_array(dwords, SFDP_4BAIT_DWORD_MAX); + + /* + * Compute the subset of (Fast) Read commands for which the 4-byte + * version is supported. + */ + discard_hwcaps = 0; + read_hwcaps = 0; + for (i = 0; i < ARRAY_SIZE(reads); i++) { + const struct sfdp_4bait *read = &reads[i]; + + discard_hwcaps |= read->hwcaps; + if ((params->hwcaps.mask & read->hwcaps) && + (dwords[0] & read->supported_bit)) + read_hwcaps |= read->hwcaps; + } + + /* + * Compute the subset of Page Program commands for which the 4-byte + * version is supported. + */ + pp_hwcaps = 0; + for (i = 0; i < ARRAY_SIZE(programs); i++) { + const struct sfdp_4bait *program = &programs[i]; + + /* + * The 4 Byte Address Instruction (Optional) Table is the only + * SFDP table that indicates support for Page Program Commands. + * Bypass the params->hwcaps.mask and consider 4BAIT the biggest + * authority for specifying Page Program support. + */ + discard_hwcaps |= program->hwcaps; + if (dwords[0] & program->supported_bit) + pp_hwcaps |= program->hwcaps; + } + + /* + * Compute the subset of Sector Erase commands for which the 4-byte + * version is supported. + */ + erase_mask = 0; + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) { + const struct sfdp_4bait *erase = &erases[i]; + + if (dwords[0] & erase->supported_bit) + erase_mask |= BIT(i); + } + + /* Replicate the sort done for the map's erase types in BFPT. */ + erase_mask = spi_nor_sort_erase_mask(map, erase_mask); + + /* + * We need at least one 4-byte op code per read, program and erase + * operation; the .read(), .write() and .erase() hooks share the + * nor->addr_width value. + */ + if (!read_hwcaps || !pp_hwcaps || !erase_mask) + goto out; + + /* + * Discard all operations from the 4-byte instruction set which are + * not supported by this memory. + */ + params->hwcaps.mask &= ~discard_hwcaps; + params->hwcaps.mask |= (read_hwcaps | pp_hwcaps); + + /* Use the 4-byte address instruction set. */ + for (i = 0; i < SNOR_CMD_READ_MAX; i++) { + struct spi_nor_read_command *read_cmd = ¶ms->reads[i]; + + read_cmd->opcode = spi_nor_convert_3to4_read(read_cmd->opcode); + } + + /* 4BAIT is the only SFDP table that indicates page program support. */ + if (pp_hwcaps & SNOR_HWCAPS_PP) + spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP], + SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1); + if (pp_hwcaps & SNOR_HWCAPS_PP_1_1_4) + spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_1_4], + SPINOR_OP_PP_1_1_4_4B, + SNOR_PROTO_1_1_4); + if (pp_hwcaps & SNOR_HWCAPS_PP_1_4_4) + spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_4_4], + SPINOR_OP_PP_1_4_4_4B, + SNOR_PROTO_1_4_4); + + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) { + if (erase_mask & BIT(i)) + erase_type[i].opcode = (dwords[1] >> + erase_type[i].idx * 8) & 0xFF; + else + spi_nor_set_erase_type(&erase_type[i], 0u, 0xFF); + } + + /* + * We set SNOR_F_HAS_4BAIT in order to skip spi_nor_set_4byte_opcodes() + * later because we already did the conversion to 4byte opcodes. Also, + * this latest function implements a legacy quirk for the erase size of + * Spansion memory. However this quirk is no longer needed with new + * SFDP compliant memories. + */ + nor->addr_width = 4; + nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT; + + /* fall through */ +out: + kfree(dwords); + return ret; +} + +/** + * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters. + * @nor: pointer to a 'struct spi_nor' + * @params: pointer to the 'struct spi_nor_flash_parameter' to be + * filled + * + * The Serial Flash Discoverable Parameters are described by the JEDEC JESD216 + * specification. This is a standard which tends to supported by almost all + * (Q)SPI memory manufacturers. Those hard-coded tables allow us to learn at + * runtime the main parameters needed to perform basic SPI flash operations such + * as Fast Read, Page Program or Sector Erase commands. + * + * Return: 0 on success, -errno otherwise. + */ +int spi_nor_parse_sfdp(struct spi_nor *nor, + struct spi_nor_flash_parameter *params) +{ + const struct sfdp_parameter_header *param_header, *bfpt_header; + struct sfdp_parameter_header *param_headers = NULL; + struct sfdp_header header; + struct device *dev = nor->dev; + size_t psize; + int i, err; + + /* Get the SFDP header. */ + err = spi_nor_read_sfdp_dma_unsafe(nor, 0, sizeof(header), &header); + if (err < 0) + return err; + + /* Check the SFDP header version. */ + if (le32_to_cpu(header.signature) != SFDP_SIGNATURE || + header.major != SFDP_JESD216_MAJOR) + return -EINVAL; + + /* + * Verify that the first and only mandatory parameter header is a + * Basic Flash Parameter Table header as specified in JESD216. + */ + bfpt_header = &header.bfpt_header; + if (SFDP_PARAM_HEADER_ID(bfpt_header) != SFDP_BFPT_ID || + bfpt_header->major != SFDP_JESD216_MAJOR) + return -EINVAL; + + /* + * Allocate memory then read all parameter headers with a single + * Read SFDP command. These parameter headers will actually be parsed + * twice: a first time to get the latest revision of the basic flash + * parameter table, then a second time to handle the supported optional + * tables. + * Hence we read the parameter headers once for all to reduce the + * processing time. Also we use kmalloc() instead of devm_kmalloc() + * because we don't need to keep these parameter headers: the allocated + * memory is always released with kfree() before exiting this function. + */ + if (header.nph) { + psize = header.nph * sizeof(*param_headers); + + param_headers = kmalloc(psize, GFP_KERNEL); + if (!param_headers) + return -ENOMEM; + + err = spi_nor_read_sfdp(nor, sizeof(header), + psize, param_headers); + if (err < 0) { + dev_dbg(dev, "failed to read SFDP parameter headers\n"); + goto exit; + } + } + + /* + * Check other parameter headers to get the latest revision of + * the basic flash parameter table. + */ + for (i = 0; i < header.nph; i++) { + param_header = ¶m_headers[i]; + + if (SFDP_PARAM_HEADER_ID(param_header) == SFDP_BFPT_ID && + param_header->major == SFDP_JESD216_MAJOR && + (param_header->minor > bfpt_header->minor || + (param_header->minor == bfpt_header->minor && + param_header->length > bfpt_header->length))) + bfpt_header = param_header; + } + + err = spi_nor_parse_bfpt(nor, bfpt_header, params); + if (err) + goto exit; + + /* Parse optional parameter tables. */ + for (i = 0; i < header.nph; i++) { + param_header = ¶m_headers[i]; + + switch (SFDP_PARAM_HEADER_ID(param_header)) { + case SFDP_SECTOR_MAP_ID: + err = spi_nor_parse_smpt(nor, param_header, params); + break; + + case SFDP_4BAIT_ID: + err = spi_nor_parse_4bait(nor, param_header, params); + break; + + default: + break; + } + + if (err) { + dev_warn(dev, "Failed to parse optional parameter table: %04x\n", + SFDP_PARAM_HEADER_ID(param_header)); + /* + * Let's not drop all information we extracted so far + * if optional table parsers fail. In case of failing, + * each optional parser is responsible to roll back to + * the previously known spi_nor data. + */ + err = 0; + } + } + +exit: + kfree(param_headers); + return err; +} + diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h new file mode 100644 index 000000000000..e0a8ded04890 --- /dev/null +++ b/drivers/mtd/spi-nor/sfdp.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2005, Intec Automation Inc. + * Copyright (C) 2014, Freescale Semiconductor, Inc. + */ + +#ifndef __LINUX_MTD_SFDP_H +#define __LINUX_MTD_SFDP_H + +/* Basic Flash Parameter Table */ + +/* + * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs. + * They are indexed from 1 but C arrays are indexed from 0. + */ +#define BFPT_DWORD(i) ((i) - 1) +#define BFPT_DWORD_MAX 16 + +struct sfdp_bfpt { + u32 dwords[BFPT_DWORD_MAX]; +}; + +/* The first version of JESD216 defined only 9 DWORDs. */ +#define BFPT_DWORD_MAX_JESD216 9 + +/* 1st DWORD. */ +#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16) +#define BFPT_DWORD1_ADDRESS_BYTES_MASK GENMASK(18, 17) +#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY (0x0UL << 17) +#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 (0x1UL << 17) +#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY (0x2UL << 17) +#define BFPT_DWORD1_DTR BIT(19) +#define BFPT_DWORD1_FAST_READ_1_2_2 BIT(20) +#define BFPT_DWORD1_FAST_READ_1_4_4 BIT(21) +#define BFPT_DWORD1_FAST_READ_1_1_4 BIT(22) + +/* 5th DWORD. */ +#define BFPT_DWORD5_FAST_READ_2_2_2 BIT(0) +#define BFPT_DWORD5_FAST_READ_4_4_4 BIT(4) + +/* 11th DWORD. */ +#define BFPT_DWORD11_PAGE_SIZE_SHIFT 4 +#define BFPT_DWORD11_PAGE_SIZE_MASK GENMASK(7, 4) + +/* 15th DWORD. */ + +/* + * (from JESD216 rev B) + * Quad Enable Requirements (QER): + * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4 + * reads based on instruction. DQ3/HOLD# functions are hold during + * instruction phase. + * - 001b: QE is bit 1 of status register 2. It is set via Write Status with + * two data bytes where bit 1 of the second byte is one. + * [...] + * Writing only one byte to the status register has the side-effect of + * clearing status register 2, including the QE bit. The 100b code is + * used if writing one byte to the status register does not modify + * status register 2. + * - 010b: QE is bit 6 of status register 1. It is set via Write Status with + * one data byte where bit 6 is one. + * [...] + * - 011b: QE is bit 7 of status register 2. It is set via Write status + * register 2 instruction 3Eh with one data byte where bit 7 is one. + * [...] + * The status register 2 is read using instruction 3Fh. + * - 100b: QE is bit 1 of status register 2. It is set via Write Status with + * two data bytes where bit 1 of the second byte is one. + * [...] + * In contrast to the 001b code, writing one byte to the status + * register does not modify status register 2. + * - 101b: QE is bit 1 of status register 2. Status register 1 is read using + * Read Status instruction 05h. Status register2 is read using + * instruction 35h. QE is set via Write Status instruction 01h with + * two data bytes where bit 1 of the second byte is one. + * [...] + */ +#define BFPT_DWORD15_QER_MASK GENMASK(22, 20) +#define BFPT_DWORD15_QER_NONE (0x0UL << 20) /* Micron */ +#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY (0x1UL << 20) +#define BFPT_DWORD15_QER_SR1_BIT6 (0x2UL << 20) /* Macronix */ +#define BFPT_DWORD15_QER_SR2_BIT7 (0x3UL << 20) +#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20) +#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */ + +struct sfdp_parameter_header { + u8 id_lsb; + u8 minor; + u8 major; + u8 length; /* in double words */ + u8 parameter_table_pointer[3]; /* byte address */ + u8 id_msb; +}; + +int spi_nor_parse_sfdp(struct spi_nor *nor, + struct spi_nor_flash_parameter *params); + +#endif /* __LINUX_MTD_SFDP_H */