@@ -619,6 +619,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-nitrogen7.dtb \
imx7d-pico-dwarf.dtb \
imx7d-pico-hobbit.dtb \
+ imx7d-pico-nymph.dtb \
imx7d-pico-pi.dtb \
imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb \
new file mode 100644
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+// Richard Hu <richard.hu@technexion.com>
+// Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx7d-pico.dtsi"
+/ {
+ model = "TechNexion PICO-IMX7 and NYMPH baseboard";
+ compatible = "technexion,imx7d-pico-nymph", "fsl,imx7d";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led {
+ label = "gpio-led";
+ gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx7d-sgtl5000";
+ audio-cpu = <&sai1>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "LINE_IN", "Line In Jack",
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ };
+
+ sys_mclk: clock-sys-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+};
+
+&i2c1 {
+ clock_frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ sgtl5000: audio-codec@a {
+ reg = <0x0a>;
+ compatible = "fsl,sgtl5000";
+ clocks = <&sys_mclk>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ adc@52 {
+ compatible = "ti,adc081c";
+ reg = <0x52>;
+ vref-supply = <®_2p5v>;
+ };
+};
+
+&i2c2 {
+ clock_frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+};
+
+&iomuxc {
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14
+ >;
+ };
+};
Add support for the imx7d pico board with nymph baseboard combination. Signed-off-by: Fabio Estevam <festevam@gmail.com> --- Changes since v1: - Use audio-codec as the codec node name arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx7d-pico-nymph.dts | 84 ++++++++++++++++++++++++++ 2 files changed, 85 insertions(+) create mode 100644 arch/arm/boot/dts/imx7d-pico-nymph.dts