@@ -101,13 +101,6 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction footbridge_timer_irq = {
- .name = "dc21285_timer1",
- .handler = timer1_interrupt,
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .dev_id = &ckevt_dc21285,
-};
-
/*
* Set up timer interrupt.
*/
@@ -118,7 +111,9 @@ void __init footbridge_timer_init(void)
clocksource_register_hz(&cksrc_dc21285, rate);
- setup_irq(ce->irq, &footbridge_timer_irq);
+ if (request_irq(ce->irq, timer1_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "dc21285_timer1", &ckevt_dc21285))
+ pr_err("Failed to request irq %d (dc21285_timer1)", ce->irq);
ce->cpumask = cpumask_of(smp_processor_id());
clockevents_config_and_register(ce, rate, 0x4, 0xffffff);
@@ -96,11 +96,6 @@ static void isa_irq_handler(struct irq_desc *desc)
generic_handle_irq(isa_irq);
}
-static struct irqaction irq_cascade = {
- .handler = no_action,
- .name = "cascade",
-};
-
static struct resource pic1_resource = {
.name = "pic1",
.start = 0x20,
@@ -160,7 +155,10 @@ void __init isa_init_irq(unsigned int host_irq)
request_resource(&ioport_resource, &pic1_resource);
request_resource(&ioport_resource, &pic2_resource);
- setup_irq(IRQ_ISA_CASCADE, &irq_cascade);
+
+ irq = IRQ_ISA_CASCADE;
+ if (request_irq(irq, no_action, 0, "cascade", NULL))
+ pr_err("Failed to request irq %u (cascade)\n", irq);
irq_set_chained_handler(host_irq, isa_irq_handler);
@@ -25,17 +25,12 @@ static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction pit_timer_irq = {
- .name = "pit",
- .handler = pit_timer_interrupt,
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .dev_id = &i8253_clockevent,
-};
-
void __init isa_timer_init(void)
{
clocksource_i8253_init();
- setup_irq(i8253_clockevent.irq, &pit_timer_irq);
+ if (request_irq(i8253_clockevent.irq, pit_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "pit", &i8253_clockevent))
+ pr_err("Failed to request irq %d(pit)\n", i8253_clockevent.irq);
clockevent_i8253_init(false);
}
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> --- v4: * Fix build warning in isa-irq.c & ensure no build warnings v3: * Split out from series, also create subarch level patch as Thomas suggested to take it thr' respective maintainers * Modify string displayed in case of error as suggested by Thomas * Re-arrange code as required to improve readability * Remove irrelevant parts from commit message & improve v2: * Replace pr_err("request_irq() on %s failed" by pr_err("%s: request_irq() failed" * Commit message massage arch/arm/mach-footbridge/dc21285-timer.c | 11 +++-------- arch/arm/mach-footbridge/isa-irq.c | 10 ++++------ arch/arm/mach-footbridge/isa-timer.c | 11 +++-------- 3 files changed, 10 insertions(+), 22 deletions(-)