diff mbox series

[v2,15/25] mtd: spi-nor: Move Macronix bits out of core.c

Message ID 20200313194130.342251-16-tudor.ambarus@microchip.com (mailing list archive)
State Mainlined
Commit 10526d85e4c6cb2f83e582b4b03a9587d7bc09d9
Headers show
Series mtd: spi-nor: Move manufacturer/SFDP code out | expand

Commit Message

Tudor Ambarus March 13, 2020, 7:42 p.m. UTC 
From: Boris Brezillon <bbrezillon@kernel.org>

Create a SPI NOR manufacturer driver for Macronix chips, and move the
Macronix definitions outside of core.c.

Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 drivers/mtd/spi-nor/Makefile   |  1 +
 drivers/mtd/spi-nor/core.c     | 69 +-----------------------
 drivers/mtd/spi-nor/core.h     |  1 +
 drivers/mtd/spi-nor/macronix.c | 98 ++++++++++++++++++++++++++++++++++
 4 files changed, 101 insertions(+), 68 deletions(-)
 create mode 100644 drivers/mtd/spi-nor/macronix.c
diff mbox series

Patch

diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index 5c849f104cc4..c94798987801 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -9,4 +9,5 @@  spi-nor-objs			+= fujitsu.o
 spi-nor-objs			+= gigadevice.o
 spi-nor-objs			+= intel.o
 spi-nor-objs			+= issi.o
+spi-nor-objs			+= macronix.o
 obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index a982d8ea811c..beb3c7372647 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2007,31 +2007,6 @@  int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
 	return 0;
 }
 
-static int
-mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
-			    const struct sfdp_parameter_header *bfpt_header,
-			    const struct sfdp_bfpt *bfpt,
-			    struct spi_nor_flash_parameter *params)
-{
-	/*
-	 * MX25L25635F supports 4B opcodes but MX25L25635E does not.
-	 * Unfortunately, Macronix has re-used the same JEDEC ID for both
-	 * variants which prevents us from defining a new entry in the parts
-	 * table.
-	 * We need a way to differentiate MX25L25635E and MX25L25635F, and it
-	 * seems that the F version advertises support for Fast Read 4-4-4 in
-	 * its BFPT table.
-	 */
-	if (bfpt->dwords[BFPT_DWORD(5)] & BFPT_DWORD5_FAST_READ_4_4_4)
-		nor->flags |= SNOR_F_4B_OPCODES;
-
-	return 0;
-}
-
-static struct spi_nor_fixups mx25l25635_fixups = {
-	.post_bfpt = mx25l25635_post_bfpt_fixups,
-};
-
 /* NOTE: double check command sets and memory organization when you add
  * more nor chips.  This current list focusses on newer chips, which
  * have been converging on command sets which including JEDEC ID.
@@ -2044,39 +2019,6 @@  static struct spi_nor_fixups mx25l25635_fixups = {
  * old entries may be missing 4K flag.
  */
 static const struct flash_info spi_nor_ids[] = {
-	/* Macronix */
-	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1, SECT_4K) },
-	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
-	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
-	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
-	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
-	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
-	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
-	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
-	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
-	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024,  64,
-			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8, SECT_4K) },
-	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16, SECT_4K) },
-	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
-	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
-	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-	{ "mx25r3235f",  INFO(0xc22816, 0, 64 * 1024,  64,
-			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
-			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
-			 SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-			 .fixups = &mx25l25635_fixups },
-	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
-	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16,
-			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
-	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
-
 	/* Micron <--> ST Micro */
 	{ "n25q016a",	 INFO(0x20bb15, 0, 64 * 1024,   32, SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
@@ -2313,6 +2255,7 @@  static const struct spi_nor_manufacturer *manufacturers[] = {
 	&spi_nor_gigadevice,
 	&spi_nor_intel,
 	&spi_nor_issi,
+	&spi_nor_macronix,
 };
 
 static const struct flash_info *
@@ -3092,12 +3035,6 @@  static int spi_nor_setup(struct spi_nor *nor,
 	return nor->params.setup(nor, hwcaps);
 }
 
-static void macronix_set_default_init(struct spi_nor *nor)
-{
-	nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
-	nor->params.set_4byte_addr_mode = spi_nor_set_4byte_addr_mode;
-}
-
 static void sst_set_default_init(struct spi_nor *nor)
 {
 	nor->flags |= SNOR_F_HAS_LOCK;
@@ -3125,10 +3062,6 @@  static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
 {
 	/* Init flash parameters based on MFR */
 	switch (JEDEC_MFR(nor->info)) {
-	case SNOR_MFR_MACRONIX:
-		macronix_set_default_init(nor);
-		break;
-
 	case SNOR_MFR_ST:
 	case SNOR_MFR_MICRON:
 		st_micron_set_default_init(nor);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 0967c84235ce..8ef5acc5d052 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -175,6 +175,7 @@  extern const struct spi_nor_manufacturer spi_nor_fujitsu;
 extern const struct spi_nor_manufacturer spi_nor_gigadevice;
 extern const struct spi_nor_manufacturer spi_nor_intel;
 extern const struct spi_nor_manufacturer spi_nor_issi;
+extern const struct spi_nor_manufacturer spi_nor_macronix;
 
 int spi_nor_write_enable(struct spi_nor *nor);
 int spi_nor_write_disable(struct spi_nor *nor);
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
new file mode 100644
index 000000000000..c9b6b45d8f99
--- /dev/null
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -0,0 +1,98 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static int
+mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
+			    const struct sfdp_parameter_header *bfpt_header,
+			    const struct sfdp_bfpt *bfpt,
+			    struct spi_nor_flash_parameter *params)
+{
+	/*
+	 * MX25L25635F supports 4B opcodes but MX25L25635E does not.
+	 * Unfortunately, Macronix has re-used the same JEDEC ID for both
+	 * variants which prevents us from defining a new entry in the parts
+	 * table.
+	 * We need a way to differentiate MX25L25635E and MX25L25635F, and it
+	 * seems that the F version advertises support for Fast Read 4-4-4 in
+	 * its BFPT table.
+	 */
+	if (bfpt->dwords[BFPT_DWORD(5)] & BFPT_DWORD5_FAST_READ_4_4_4)
+		nor->flags |= SNOR_F_4B_OPCODES;
+
+	return 0;
+}
+
+static struct spi_nor_fixups mx25l25635_fixups = {
+	.post_bfpt = mx25l25635_post_bfpt_fixups,
+};
+
+static const struct flash_info macronix_parts[] = {
+	/* Macronix */
+	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1, SECT_4K) },
+	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
+	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
+	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
+	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
+	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
+	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
+	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
+	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
+	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024,  64,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8, SECT_4K) },
+	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16, SECT_4K) },
+	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
+	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+	{ "mx25r3235f",  INFO(0xc22816, 0, 64 * 1024,  64,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		.fixups = &mx25l25635_fixups },
+	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512,
+			      SECT_4K | SPI_NOR_4B_OPCODES) },
+	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			      SPI_NOR_4B_OPCODES) },
+	{ "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048,
+			      SPI_NOR_QUAD_READ) },
+};
+
+static void macronix_default_init(struct spi_nor *nor)
+{
+	nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
+	nor->params.set_4byte_addr_mode = spi_nor_set_4byte_addr_mode;
+}
+
+static const struct spi_nor_fixups macronix_fixups = {
+	.default_init = macronix_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_macronix = {
+	.name = "macronix",
+	.parts = macronix_parts,
+	.nparts = ARRAY_SIZE(macronix_parts),
+	.fixups = &macronix_fixups,
+};