[v1,4/6] ARM: dts: add Protonic VT7 board

Message ID	20200318120354.4989-4-o.rempel@pengutronix.de (mailing list archive)
State	New, archived
Headers	show Return-Path: <SRS0=jTgU=5D=lists.infradead.org=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@kernel.org> DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org A39612076D From: Oleksij Rempel <o.rempel@pengutronix.de> To: Mark Rutland <mark.rutland@arm.com>, Rob Herring <robh+dt@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Shawn Guo <shawnguo@kernel.org> Subject: [PATCH v1 4/6] ARM: dts: add Protonic VT7 board Date: Wed, 18 Mar 2020 13:03:52 +0100 Message-Id: <20200318120354.4989-4-o.rempel@pengutronix.de> In-Reply-To: <20200318120354.4989-1-o.rempel@pengutronix.de> References: <20200318120354.4989-1-o.rempel@pengutronix.de> MIME-Version: 1.0 summary: Content analysis details: (0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record Precedence: list Cc: devicetree@vger.kernel.org, Robin van der Gracht <robin@protonic.nl>, linux-kernel@vger.kernel.org, Oleksij Rempel <o.rempel@pengutronix.de>, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, David Jander <david@protonic.nl>, Fabio Estevam <festevam@gmail.com>, linux-arm-kernel@lists.infradead.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org
Series	[v1,1/6] dt-bindings: vendor-prefixes: Add an entry for Protonic Holland \| expand [v1,1/6] dt-bindings: vendor-prefixes: Add an entry for Protonic Holland [v1,2/6] ARM: dts: add Protonic PRTI6Q board [v1,3/6] ARM: dts: add Protonic WD2 board [v1,4/6] ARM: dts: add Protonic VT7 board [v1,5/6] ARM: dts: add Protonic RVT board [v1,6/6] m arch/arm/boot/dts/imx6q-prti6q.dts

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 5bdf8d38b2f0..424be1edf005 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -168,6 +168,7 @@ properties: - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board + - prt,prtvt7 # Protonic VT7 board - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 - toradex,colibri_imx6dl # Colibri iMX6 Module diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b6fc2b375a61..e53abe1de259 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -446,6 +446,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-mira-rdk-nand.dtb \ imx6dl-phytec-pbab01.dtb \ + imx6dl-prtvt7.dtb \ imx6dl-rex-basic.dtb \ imx6dl-riotboard.dtb \ imx6dl-sabreauto.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts new file mode 100644 index 000000000000..704410a84b0c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Protonic Holland + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-prti6q.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Protonic VT7"; + compatible = "prt,prtvt7", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; + + reg_12v_bl: regulator-bl-12v { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_12v_bl>; + compatible = "regulator-fixed"; + regulator-name = "12v-bl"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + display: display { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_disp>; + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + status = "okay"; + + port@0 { + reg = <0>; + + display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel { + compatible = "innolux,g070y2t0ec"; + backlight = <&backlight_lcd>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + + hard_keys { + compatible = "gpio-keys"; + autorepeat; + + esc { + label = "GPIO Key ESC"; + linux,code = <KEY_ESC>; + gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>; + }; + + up { + label = "GPIO Key UP"; + linux,code = <KEY_UP>; + gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>; + }; + + down { + label = "GPIO Key DOWN"; + linux,code = <KEY_DOWN>; + gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>; + }; + + enter { + label = "GPIO Key Enter"; + linux,code = <KEY_ENTER>; + gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>; + }; + + cycle { + label = "GPIO Key CYCLE"; + linux,code = <KEY_CYCLEWINDOWS>; + gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>; + }; + + f1 { + label = "GPIO Key F1"; + linux,code = <KEY_F1>; + gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>; + }; + + f2 { + label = "GPIO Key F2"; + linux,code = <KEY_F2>; + gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>; + }; + + f3 { + label = "GPIO Key F3"; + linux,code = <KEY_F3>; + gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>; + }; + + f4 { + label = "GPIO Key F4"; + linux,code = <KEY_F4>; + gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>; + }; + + f5 { + label = "GPIO Key F5"; + linux,code = <KEY_F5>; + gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>; + }; + + f6 { + label = "GPIO Key F6"; + linux,code = <KEY_F6>; + gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>; + }; + + f7 { + label = "GPIO Key F7"; + linux,code = <KEY_F7>; + gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>; + }; + + f8 { + label = "GPIO Key F8"; + linux,code = <KEY_F8>; + gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>; + }; + + f9 { + label = "GPIO Key F9"; + linux,code = <KEY_F9>; + gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>; + }; + + f10 { + label = "GPIO Key F10"; + linux,code = <KEY_F10>; + gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>; + }; + }; + +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; +}; + +&iomuxc { + prti6q { + pinctrl_hog: hoggrp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + /* CAN1_SR output */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 + /* ITU656_nRESET */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + /* ITU656_nPDN */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 + /* AUDIO_nRESET */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 + + /* HW revision detect */ + /* REV_ID0 */ + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + /* REV_ID1 = PWM output LED_PWM (SION) */ + /* defined in &pinctrl_pwm3 */ + /* REV_ID2 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 + /* REV_ID3 */ + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + /* REV_ID4 */ + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0 + >; + }; + + pinctrl_tsc2046e: tsc2046egrp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_reg_12v_bl: 12blgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 + >; + }; + + pinctrl_ipu1_disp: ipudisp1grp { + fsl,pins = < + /* DSE 0xb0 => 26 Ohm, + * 0xa0 => 37 Ohm, + * 0x90 => 78 Ohm + */ + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xb0 + + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0 + + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0 + + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0 + >; + }; + }; +}; + +&pcie { + status = "disabled"; +}; + +&uart2 { + status = "disabled"; +}; + +&uart5 { + status = "disabled"; +}; + +&usbh1 { + status = "disabled"; +}; + +&can2 { + status = "disabled"; +}; + +&vpu { + status = "disabled"; +}; + +&backlight_lcd { + pinctrl-names = "default"; + pinctrl-0 = <>; + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000>; + brightness-levels = <0 5 7 9 12 15 20 27 35 47 62 81 107 142 188 248 + 328 433 573 757 1000>; + default-brightness-level = <20>; + power-supply = <&reg_12v_bl>; + status = "okay"; +}; + +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + tsc: tsc2046e@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2046e>; + compatible = "ti,tsc2046"; + spi-max-frequency = <100000>; + reg = <0>; + interrupt-parent = <&gpio3>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + pendown-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + vcc-supply = <&reg_3v3>; + + ti,vref-delay-usecs = /bits/ 16 <100>; + + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <8000>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <4800>; + ti,x-plate-ohms = /bits/ 16 <800>; + ti,y-plate-ohms = /bits/ 16 <300>; + ti,pressure-max = /bits/ 16 <4095>; + + ti,skip-samples = <2>; + ti,sample-period-msecs = <10>; + ti,report-period-msecs = <30>; + + ti,filter-tolerance = <80>; + ti,touch-resistance-threshold = <3500>; + }; +}; + +&ipu1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + status = "okay"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display_in>; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&leds { + led-hb0 { + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c3 { + rtc: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + gpio_pca: gpio@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + }; +};

[v1,4/6] ARM: dts: add Protonic VT7 board

Commit Message

Patch