@@ -87,6 +87,11 @@ static struct irq_domain *gic_domain;
static const struct irq_domain_ops *vpe_domain_ops;
static const struct irq_domain_ops *sgi_domain_ops;
+static bool has_v4_1(void)
+{
+ return !!sgi_domain_ops;
+}
+
int its_alloc_vcpu_irqs(struct its_vm *vm)
{
int vpe_base_irq, i;
@@ -139,18 +144,50 @@ static int its_send_vpe_cmd(struct its_vpe *vpe, struct its_cmd_info *info)
return irq_set_vcpu_affinity(vpe->irq, info);
}
-int its_schedule_vpe(struct its_vpe *vpe, bool on)
+int its_make_vpe_non_resident(struct its_vpe *vpe, bool db)
{
- struct its_cmd_info info;
+ struct irq_desc *desc = irq_to_desc(vpe->irq);
+ struct its_cmd_info info = { };
int ret;
WARN_ON(preemptible());
- info.cmd_type = on ? SCHEDULE_VPE : DESCHEDULE_VPE;
+ info.cmd_type = DESCHEDULE_VPE;
+ if (has_v4_1()) {
+ /* GICv4.1 can directly deal with doorbells */
+ info.req_db = db;
+ } else {
+ /* Undo the nested disable_irq() calls... */
+ while (db && irqd_irq_disabled(&desc->irq_data))
+ enable_irq(vpe->irq);
+ }
+
+ ret = its_send_vpe_cmd(vpe, &info);
+ if (!ret)
+ vpe->resident = false;
+
+ return ret;
+}
+
+int its_make_vpe_resident(struct its_vpe *vpe, bool g0en, bool g1en)
+{
+ struct its_cmd_info info = { };
+ int ret;
+
+ WARN_ON(preemptible());
+
+ info.cmd_type = SCHEDULE_VPE;
+ if (has_v4_1()) {
+ info.g0en = g0en;
+ info.g1en = g1en;
+ } else {
+ /* Disabled the doorbell, as we're about to enter the guest */
+ disable_irq_nosync(vpe->irq);
+ }
ret = its_send_vpe_cmd(vpe, &info);
if (!ret)
- vpe->resident = on;
+ vpe->resident = true;
return ret;
}
@@ -70,6 +70,7 @@ struct vgic_global {
/* Hardware has GICv4? */
bool has_gicv4;
+ bool has_gicv4_1;
/* GIC system register CPU interface */
struct static_key_false gicv3_cpuif;
@@ -125,7 +125,8 @@ struct its_cmd_info {
int its_alloc_vcpu_irqs(struct its_vm *vm);
void its_free_vcpu_irqs(struct its_vm *vm);
-int its_schedule_vpe(struct its_vpe *vpe, bool on);
+int its_make_vpe_resident(struct its_vpe *vpe, bool g0en, bool g1en);
+int its_make_vpe_non_resident(struct its_vpe *vpe, bool db);
int its_invall_vpe(struct its_vpe *vpe);
int its_map_vlpi(int irq, struct its_vlpi_map *map);
int its_get_vlpi(int irq, struct its_vlpi_map *map);
@@ -595,7 +595,9 @@ int vgic_v3_probe(const struct gic_kvm_info *info)
/* GICv4 support? */
if (info->has_v4) {
kvm_vgic_global_state.has_gicv4 = gicv4_enable;
- kvm_info("GICv4 support %sabled\n",
+ kvm_vgic_global_state.has_gicv4_1 = info->has_v4_1 && gicv4_enable;
+ kvm_info("GICv4%s support %sabled\n",
+ kvm_vgic_global_state.has_gicv4_1 ? ".1" : "",
gicv4_enable ? "en" : "dis");
}
@@ -67,10 +67,10 @@
* it. And if we've migrated our vcpu from one CPU to another, we must
* tell the ITS (so that the messages reach the right redistributor).
* This is done in two steps: first issue a irq_set_affinity() on the
- * irq corresponding to the vcpu, then call its_schedule_vpe(). You
- * must be in a non-preemptible context. On exit, another call to
- * its_schedule_vpe() tells the redistributor that we're done with the
- * vcpu.
+ * irq corresponding to the vcpu, then call its_make_vpe_resident().
+ * You must be in a non-preemptible context. On exit, a call to
+ * its_make_vpe_non_resident() tells the redistributor that we're done
+ * with the vcpu.
*
* Finally, the doorbell handling: Each vcpu is allocated an interrupt
* which will fire each time a VLPI is made pending whilst the vcpu is
@@ -86,7 +86,8 @@ static irqreturn_t vgic_v4_doorbell_handler(int irq, void *info)
struct kvm_vcpu *vcpu = info;
/* We got the message, no need to fire again */
- if (!irqd_irq_disabled(&irq_to_desc(irq)->irq_data))
+ if (!kvm_vgic_global_state.has_gicv4_1 &&
+ !irqd_irq_disabled(&irq_to_desc(irq)->irq_data))
disable_irq_nosync(irq);
vcpu->arch.vgic_cpu.vgic_v3.its_vpe.pending_last = true;
@@ -199,19 +200,11 @@ void vgic_v4_teardown(struct kvm *kvm)
int vgic_v4_put(struct kvm_vcpu *vcpu, bool need_db)
{
struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
- struct irq_desc *desc = irq_to_desc(vpe->irq);
if (!vgic_supports_direct_msis(vcpu->kvm) || !vpe->resident)
return 0;
- /*
- * If blocking, a doorbell is required. Undo the nested
- * disable_irq() calls...
- */
- while (need_db && irqd_irq_disabled(&desc->irq_data))
- enable_irq(vpe->irq);
-
- return its_schedule_vpe(vpe, false);
+ return its_make_vpe_non_resident(vpe, need_db);
}
int vgic_v4_load(struct kvm_vcpu *vcpu)
@@ -232,18 +225,19 @@ int vgic_v4_load(struct kvm_vcpu *vcpu)
if (err)
return err;
- /* Disabled the doorbell, as we're about to enter the guest */
- disable_irq_nosync(vpe->irq);
-
- err = its_schedule_vpe(vpe, true);
+ err = its_make_vpe_resident(vpe, false, vcpu->kvm->arch.vgic.enabled);
if (err)
return err;
/*
* Now that the VPE is resident, let's get rid of a potential
- * doorbell interrupt that would still be pending.
+ * doorbell interrupt that would still be pending. This is a
+ * GICv4.0 only "feature"...
*/
- return irq_set_irqchip_state(vpe->irq, IRQCHIP_STATE_PENDING, false);
+ if (!kvm_vgic_global_state.has_gicv4_1)
+ err = irq_set_irqchip_state(vpe->irq, IRQCHIP_STATE_PENDING, false);
+
+ return err;
}
static struct vgic_its *vgic_get_its(struct kvm *kvm,