diff mbox series

[v6,3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present

Message ID 20200324182812.20420-4-nsaenzjulienne@suse.de (mailing list archive)
State New, archived
Headers show
Series USB: pci-quirks: Add Raspberry Pi 4 quirk | expand

Commit Message

Nicolas Saenz Julienne March 24, 2020, 6:28 p.m. UTC
xHCI's PCI fixup, run at the end of pcie-brcmstb's probe, depends on
RPi4's VideoCore firmware interface to be up and running. It's possible
for both initializations to race, so make sure it's available prior to
starting.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Bjorn Helgaas April 1, 2020, 8:41 p.m. UTC | #1
On Tue, Mar 24, 2020 at 07:28:11PM +0100, Nicolas Saenz Julienne wrote:
> xHCI's PCI fixup, run at the end of pcie-brcmstb's probe, depends on

Is there a function name for this fixup that you can mention?

> RPi4's VideoCore firmware interface to be up and running. It's possible
> for both initializations to race, so make sure it's available prior to
> starting.

I guess "both initializations" means brcm_pcie_probe() and something
else?  It'd be nice to include that function name here, too.

> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  drivers/pci/controller/pcie-brcmstb.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index 3a10e678c7f4..a3d3070a5832 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -28,6 +28,8 @@
>  #include <linux/string.h>
>  #include <linux/types.h>
>  
> +#include <soc/bcm2835/raspberrypi-firmware.h>
> +
>  #include "../pci.h"
>  
>  /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
> @@ -917,11 +919,24 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>  {
>  	struct device_node *np = pdev->dev.of_node, *msi_np;
>  	struct pci_host_bridge *bridge;
> +	struct device_node *fw_np;
>  	struct brcm_pcie *pcie;
>  	struct pci_bus *child;
>  	struct resource *res;
>  	int ret;
>  
> +	/*
> +	 * We have to wait for the Raspberry Pi's firmware interface to be up
> +	 * as some PCI fixups depend on it.

It'd be nice to know the nature of this dependency between the
firmware interface and the fixups.  This may be useful for future
maintenance.  E.g., if PCI config access doesn't work until the
firmware interface is up, that would affect almost everything.  But
you say "some PCI fixups", so I suppose the actual dependency is
probably something else.

> +	 */
> +	fw_np = of_find_compatible_node(NULL, NULL,
> +					"raspberrypi,bcm2835-firmware");
> +	if (fw_np && !rpi_firmware_get(fw_np)) {
> +		of_node_put(fw_np);
> +		return -EPROBE_DEFER;
> +	}
> +	of_node_put(fw_np);
> +
>  	bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie));
>  	if (!bridge)
>  		return -ENOMEM;
> -- 
> 2.25.1
>
Nicolas Saenz Julienne April 2, 2020, 2:27 p.m. UTC | #2
Hi Bjorn,

On Wed, 2020-04-01 at 15:41 -0500, Bjorn Helgaas wrote:
> On Tue, Mar 24, 2020 at 07:28:11PM +0100, Nicolas Saenz Julienne wrote:
> > xHCI's PCI fixup, run at the end of pcie-brcmstb's probe, depends on
> 
> Is there a function name for this fixup that you can mention?

Yes, rpi_firmware_init_vl805(), I'll update the description.

> > RPi4's VideoCore firmware interface to be up and running. It's possible
> > for both initializations to race, so make sure it's available prior to
> > starting.
> 
> I guess "both initializations" means brcm_pcie_probe() and something
> else?  It'd be nice to include that function name here, too.

Noted, I'll be more explicit on the next version of the series. More in depth
explanation below.

> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> > ---
> >  drivers/pci/controller/pcie-brcmstb.c | 15 +++++++++++++++
> >  1 file changed, 15 insertions(+)
> > 
> > diff --git a/drivers/pci/controller/pcie-brcmstb.c
> > b/drivers/pci/controller/pcie-brcmstb.c
> > index 3a10e678c7f4..a3d3070a5832 100644
> > --- a/drivers/pci/controller/pcie-brcmstb.c
> > +++ b/drivers/pci/controller/pcie-brcmstb.c
> > @@ -28,6 +28,8 @@
> >  #include <linux/string.h>
> >  #include <linux/types.h>
> >  
> > +#include <soc/bcm2835/raspberrypi-firmware.h>
> > +
> >  #include "../pci.h"
> >  
> >  /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
> > @@ -917,11 +919,24 @@ static int brcm_pcie_probe(struct platform_device
> > *pdev)
> >  {
> >  	struct device_node *np = pdev->dev.of_node, *msi_np;
> >  	struct pci_host_bridge *bridge;
> > +	struct device_node *fw_np;
> >  	struct brcm_pcie *pcie;
> >  	struct pci_bus *child;
> >  	struct resource *res;
> >  	int ret;
> >  
> > +	/*
> > +	 * We have to wait for the Raspberry Pi's firmware interface to be up
> > +	 * as some PCI fixups depend on it.
> 
> It'd be nice to know the nature of this dependency between the
> firmware interface and the fixups.  This may be useful for future
> maintenance.  E.g., if PCI config access doesn't work until the
> firmware interface is up, that would affect almost everything.  But
> you say "some PCI fixups", so I suppose the actual dependency is
> probably something else.

Sorry it wasn't clear enough, I'll redo this comment. Also note that the PCIe
bus and the XHCI chip are hardwired, so that's the only device that'll ever be
available on the bus.

VIA805's XHCI firmware has to be loaded trough RPi's firmware mailbox in
between the PCIe bus probe and the subsequent USB probe. Note that a PCI reset
clears the firmware. The only mechanism available in between the two operations
are PCI Fixups. These are limited in their own way, as I can't return
-EPROBE_DEFER if the firmware interface isn't available yet. Hence the need for
an explicit dependency between pcie-brcmstb and raspberrypi's firmware mailbox
device.

Your concern here showcases this series' limitations. From a high level
perspective it's not clear to me who should be responsible for downloading the
firmware. And I get the feeling I'm abusing PCI fixups. I haven't found any
smart way to deal with this three way dependency of platform/non-platform
devices. I even looked into adding -EPROBE_DEFER support to fixups, but I fear
that would entail moving them into the core device definition.

Regards,
Nicolas
Bjorn Helgaas April 2, 2020, 7:38 p.m. UTC | #3
[+cc Rob for DT platform device dependency question]

On Thu, Apr 02, 2020 at 04:27:23PM +0200, Nicolas Saenz Julienne wrote:
> On Wed, 2020-04-01 at 15:41 -0500, Bjorn Helgaas wrote:
> > On Tue, Mar 24, 2020 at 07:28:11PM +0100, Nicolas Saenz Julienne wrote:
> > > xHCI's PCI fixup, run at the end of pcie-brcmstb's probe, depends on
> > > RPi4's VideoCore firmware interface to be up and running. It's possible
> > > for both initializations to race, so make sure it's available prior to
> > > starting.
> > > 
> > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> > > ---
> > >  drivers/pci/controller/pcie-brcmstb.c | 15 +++++++++++++++
> > >  1 file changed, 15 insertions(+)
> > > 
> > > diff --git a/drivers/pci/controller/pcie-brcmstb.c
> > > b/drivers/pci/controller/pcie-brcmstb.c
> > > index 3a10e678c7f4..a3d3070a5832 100644
> > > --- a/drivers/pci/controller/pcie-brcmstb.c
> > > +++ b/drivers/pci/controller/pcie-brcmstb.c
> > > @@ -28,6 +28,8 @@
> > >  #include <linux/string.h>
> > >  #include <linux/types.h>
> > >  
> > > +#include <soc/bcm2835/raspberrypi-firmware.h>
> > > +
> > >  #include "../pci.h"
> > >  
> > >  /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
> > > @@ -917,11 +919,24 @@ static int brcm_pcie_probe(struct platform_device
> > > *pdev)
> > >  {
> > >  	struct device_node *np = pdev->dev.of_node, *msi_np;
> > >  	struct pci_host_bridge *bridge;
> > > +	struct device_node *fw_np;
> > >  	struct brcm_pcie *pcie;
> > >  	struct pci_bus *child;
> > >  	struct resource *res;
> > >  	int ret;
> > >  
> > > +	/*
> > > +	 * We have to wait for the Raspberry Pi's firmware interface to be up
> > > +	 * as some PCI fixups depend on it.
> > 
> > It'd be nice to know the nature of this dependency between the
> > firmware interface and the fixups.  This may be useful for future
> > maintenance.  E.g., if PCI config access doesn't work until the
> > firmware interface is up, that would affect almost everything.  But
> > you say "some PCI fixups", so I suppose the actual dependency is
> > probably something else.
> 
> Sorry it wasn't clear enough, I'll redo this comment. Also note that
> the PCIe bus and the XHCI chip are hardwired, so that's the only
> device that'll ever be available on the bus.
> 
> VIA805's XHCI firmware has to be loaded trough RPi's firmware
> mailbox in between the PCIe bus probe and the subsequent USB probe.
> Note that a PCI reset clears the firmware. The only mechanism
> available in between the two operations are PCI Fixups. These are
> limited in their own way, as I can't return -EPROBE_DEFER if the
> firmware interface isn't available yet. Hence the need for an
> explicit dependency between pcie-brcmstb and raspberrypi's firmware
> mailbox device.
>
> Your concern here showcases this series' limitations. From a high
> level perspective it's not clear to me who should be responsible for
> downloading the firmware. 

I think it's fairly common for drivers to download firmware to their
devices.  I guess there's not really any need to download the firmware
until a driver wants to use the device, right?

> And I get the feeling I'm abusing PCI fixups. I haven't found any
> smart way to deal with this three way dependency of
> platform/non-platform devices.

So IIUC, the three-way dependency involves:

  1) brcm_pcie_probe(), which initialize the PCI host controller
  platform device, enumerates PCI devices, and makes them available
  for driver binding,

  2) the firmware mailbox initialization (maybe
  rpi_firmware_probe()?),

  3) quirk_usb_early_handoff(), which downloads firmware to the VL805
  PCI USB adapter via rpi_firmware_init_vl805(), which uses the
  firmware mailbox?

Is there some way to express a dependency between
"raspberrypi,bcm2835-firmware" (the platform device claimed by
rpi_firmware_probe() and "brcm,bcm2711-pcie"?  If we could ensure that
rpi_firmware_probe() runs before brcm_pcie_probe(), would that solve
part of this?

Bjorn
Nicolas Saenz Julienne April 4, 2020, 7:20 p.m. UTC | #4
On Thu, 2020-04-02 at 14:38 -0500, Bjorn Helgaas wrote:
> [+cc Rob for DT platform device dependency question]
> 
> On Thu, Apr 02, 2020 at 04:27:23PM +0200, Nicolas Saenz Julienne wrote:

[...]

> > Sorry it wasn't clear enough, I'll redo this comment. Also note that
> > the PCIe bus and the XHCI chip are hardwired, so that's the only
> > device that'll ever be available on the bus.
> > 
> > VIA805's XHCI firmware has to be loaded trough RPi's firmware
> > mailbox in between the PCIe bus probe and the subsequent USB probe.
> > Note that a PCI reset clears the firmware. The only mechanism
> > available in between the two operations are PCI Fixups. These are
> > limited in their own way, as I can't return -EPROBE_DEFER if the
> > firmware interface isn't available yet. Hence the need for an
> > explicit dependency between pcie-brcmstb and raspberrypi's firmware
> > mailbox device.
> > 
> > Your concern here showcases this series' limitations. From a high
> > level perspective it's not clear to me who should be responsible for
> > downloading the firmware. 
> 
> I think it's fairly common for drivers to download firmware to their
> devices.  I guess there's not really any need to download the firmware
> until a driver wants to use the device, right?
> 
> > And I get the feeling I'm abusing PCI fixups. I haven't found any
> > smart way to deal with this three way dependency of
> > platform/non-platform devices.
> 
> So IIUC, the three-way dependency involves:
> 
>   1) brcm_pcie_probe(), which initialize the PCI host controller
>   platform device, enumerates PCI devices, and makes them available
>   for driver binding,

Yes, and also resets the PCI bus, which will clear VL805's firmware (the XHCI
chip).

>   2) the firmware mailbox initialization (maybe
>   rpi_firmware_probe()?),
>
>   3) quirk_usb_early_handoff(), which downloads firmware to the VL805
>   PCI USB adapter via rpi_firmware_init_vl805(), which uses the
>   firmware mailbox?

And yes, that's the general idea.

> Is there some way to express a dependency between
> "raspberrypi,bcm2835-firmware" (the platform device claimed by
> rpi_firmware_probe() and "brcm,bcm2711-pcie"?  If we could ensure that
> rpi_firmware_probe() runs before brcm_pcie_probe(), would that solve
> part of this?

That's ultimately what this patch tries to achieve. If there was a way to
offload it to DT it would be way nicer.

Regards,
Nicolas
Florian Fainelli April 4, 2020, 8:09 p.m. UTC | #5
On 4/4/2020 12:20 PM, Nicolas Saenz Julienne wrote:
> On Thu, 2020-04-02 at 14:38 -0500, Bjorn Helgaas wrote:
>> [+cc Rob for DT platform device dependency question]
>>
>> On Thu, Apr 02, 2020 at 04:27:23PM +0200, Nicolas Saenz Julienne wrote:
> 
> [...]
> 
>>> Sorry it wasn't clear enough, I'll redo this comment. Also note that
>>> the PCIe bus and the XHCI chip are hardwired, so that's the only
>>> device that'll ever be available on the bus.
>>>
>>> VIA805's XHCI firmware has to be loaded trough RPi's firmware
>>> mailbox in between the PCIe bus probe and the subsequent USB probe.
>>> Note that a PCI reset clears the firmware. The only mechanism
>>> available in between the two operations are PCI Fixups. These are
>>> limited in their own way, as I can't return -EPROBE_DEFER if the
>>> firmware interface isn't available yet. Hence the need for an
>>> explicit dependency between pcie-brcmstb and raspberrypi's firmware
>>> mailbox device.
>>>
>>> Your concern here showcases this series' limitations. From a high
>>> level perspective it's not clear to me who should be responsible for
>>> downloading the firmware. 
>>
>> I think it's fairly common for drivers to download firmware to their
>> devices.  I guess there's not really any need to download the firmware
>> until a driver wants to use the device, right?
>>
>>> And I get the feeling I'm abusing PCI fixups. I haven't found any
>>> smart way to deal with this three way dependency of
>>> platform/non-platform devices.
>>
>> So IIUC, the three-way dependency involves:
>>
>>   1) brcm_pcie_probe(), which initialize the PCI host controller
>>   platform device, enumerates PCI devices, and makes them available
>>   for driver binding,
> 
> Yes, and also resets the PCI bus, which will clear VL805's firmware (the XHCI
> chip).
> 
>>   2) the firmware mailbox initialization (maybe
>>   rpi_firmware_probe()?),
>>
>>   3) quirk_usb_early_handoff(), which downloads firmware to the VL805
>>   PCI USB adapter via rpi_firmware_init_vl805(), which uses the
>>   firmware mailbox?
> 
> And yes, that's the general idea.
> 
>> Is there some way to express a dependency between
>> "raspberrypi,bcm2835-firmware" (the platform device claimed by
>> rpi_firmware_probe() and "brcm,bcm2711-pcie"?  If we could ensure that
>> rpi_firmware_probe() runs before brcm_pcie_probe(), would that solve
>> part of this?
> 
> That's ultimately what this patch tries to achieve. If there was a way to
> offload it to DT it would be way nicer.

Have you looked whether device links between producer/consumer could
help here? AFAICT there is not usually a way to express an ordering
dependency other than by referencing symbols from a different module,
which falls apart when everything gets built into the kernel obviously
and then you are at the mercy of the linking order and initicall levels.

https://www.kernel.org/doc/html/v4.13/driver-api/device_link.html
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 3a10e678c7f4..a3d3070a5832 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -28,6 +28,8 @@ 
 #include <linux/string.h>
 #include <linux/types.h>
 
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
 #include "../pci.h"
 
 /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
@@ -917,11 +919,24 @@  static int brcm_pcie_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node, *msi_np;
 	struct pci_host_bridge *bridge;
+	struct device_node *fw_np;
 	struct brcm_pcie *pcie;
 	struct pci_bus *child;
 	struct resource *res;
 	int ret;
 
+	/*
+	 * We have to wait for the Raspberry Pi's firmware interface to be up
+	 * as some PCI fixups depend on it.
+	 */
+	fw_np = of_find_compatible_node(NULL, NULL,
+					"raspberrypi,bcm2835-firmware");
+	if (fw_np && !rpi_firmware_get(fw_np)) {
+		of_node_put(fw_np);
+		return -EPROBE_DEFER;
+	}
+	of_node_put(fw_np);
+
 	bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie));
 	if (!bridge)
 		return -ENOMEM;