diff mbox series

[22/22] ARM: dts: stm32: Rename LEDs to match silkscreen on AV96

Message ID 20200328171144.51888-23-marex@denx.de (mailing list archive)
State New, archived
Headers show
Series ARM: dts: stm32: Repair AV96 board | expand

Commit Message

Marek Vasut March 28, 2020, 5:11 p.m. UTC 
The LED labels do not match the silkscreen on the board, fix it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
---
 arch/arm/boot/dts/stm32mp157a-avenger96.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index a779f7ea2025..63896cd9ddee 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -55,21 +55,21 @@  memory@c0000000 {
 	led {
 		compatible = "gpio-leds";
 		led1 {
-			label = "green:user1";
+			label = "green:user0";
 			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led2 {
-			label = "green:user2";
+			label = "green:user1";
 			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led3 {
-			label = "green:user3";
+			label = "green:user2";
 			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
 			default-state = "off";