diff mbox series

[v2,2/2] amba: Initialize dma_parms for amba devices

Message ID 20200331183844.30488-3-ulf.hansson@linaro.org (mailing list archive)
State Mainlined
Commit f458488425f1cc9a396aa1d09bb00c48783936da
Headers show
Series amba/platform: Initialize dma_parms at the bus level | expand

Commit Message

Ulf Hansson March 31, 2020, 6:38 p.m. UTC
It's currently the amba driver's responsibility to initialize the pointer,
dma_parms, for its corresponding struct device. The benefit with this
approach allows us to avoid the initialization and to not waste memory for
the struct device_dma_parameters, as this can be decided on a case by case
basis.

However, it has turned out that this approach is not very practical. Not
only does it lead to open coding, but also to real errors. In principle
callers of dma_set_max_seg_size() doesn't check the error code, but just
assumes it succeeds.

For these reasons, let's do the initialization from the common amba bus at
the device registration point. This also follows the way the PCI devices
are being managed, see pci_device_add().

Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---

Changes in v2:
	- Move initialization to amba_device_initialize() to be more consistent
	with how we manage platform devices.

---
 drivers/amba/bus.c       | 1 +
 include/linux/amba/bus.h | 1 +
 2 files changed, 2 insertions(+)

Comments

Arnd Bergmann April 22, 2020, 9:42 a.m. UTC | #1
On Tue, Mar 31, 2020 at 8:38 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> It's currently the amba driver's responsibility to initialize the pointer,
> dma_parms, for its corresponding struct device. The benefit with this
> approach allows us to avoid the initialization and to not waste memory for
> the struct device_dma_parameters, as this can be decided on a case by case
> basis.
>
> However, it has turned out that this approach is not very practical. Not
> only does it lead to open coding, but also to real errors. In principle
> callers of dma_set_max_seg_size() doesn't check the error code, but just
> assumes it succeeds.
>
> For these reasons, let's do the initialization from the common amba bus at
> the device registration point. This also follows the way the PCI devices
> are being managed, see pci_device_add().
>
> Suggested-by: Christoph Hellwig <hch@lst.de>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---

Reviewed-by: Arnd Bergmann <arnd@arndb.de>
diff mbox series

Patch

diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index fe1523664816..8558b629880b 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -645,6 +645,7 @@  static void amba_device_initialize(struct amba_device *dev, const char *name)
 	dev->dev.release = amba_device_release;
 	dev->dev.bus = &amba_bustype;
 	dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+	dev->dev.dma_parms = &dev->dma_parms;
 	dev->res.name = dev_name(&dev->dev);
 }
 
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 26f0ecf401ea..0bbfd647f5c6 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -65,6 +65,7 @@  struct amba_device {
 	struct device		dev;
 	struct resource		res;
 	struct clk		*pclk;
+	struct device_dma_parameters dma_parms;
 	unsigned int		periphid;
 	unsigned int		cid;
 	struct amba_cs_uci_id	uci;