diff mbox series

[RFC,V6,3/3] dts: arm64: mt8183: Add sensor interface nodes

Message ID 20200410071723.19720-4-louis.kuo@mediatek.com (mailing list archive)
State New, archived
Headers show
Series media: support Mediatek sensor interface driver | expand

Commit Message

Louis Kuo April 10, 2020, 7:17 a.m. UTC 
Add nodes for Mediatek's sensor interface device. Sensor interface module
embedded in Mediatek SOCs, works as a HW camera interface controller
intended for image and data transmission between cameras and host devices.

Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 25 ++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 433c62efab2d..5c7bed5a6f32 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -715,5 +715,30 @@ 
 			reg = <0 0x1a000000 0 0x1000>;
 			#clock-cells = <1>;
 		};
+		seninf: seninf@1a040000 {
+			compatible = "mediatek,mt8183-seninf";
+			reg = <0 0x1a040000 0 0x8000>,
+			      <0 0x11c80000 0 0x6000>;
+			reg-names = "base", "rx";
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
+			clocks = <&camsys CLK_CAM_SENINF>,
+				 <&topckgen CLK_TOP_MUX_SENINF>;
+			clock-names = "clk_cam_seninf", "clk_top_mux_seninf";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+
+					seninf_camisp_endpoint: endpoint {
+						remote-endpoint = <&camisp_endpoint>;
+					};
+				};
+			};
+		};
 	};
 };