@@ -1028,6 +1028,25 @@ pins {
};
};
+ sai2a_pins_c: sai2a-4 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
+ <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
+ <STM32_PINMUX('D', 12, AF10)>; /* SAI2_FS_A */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sai2a_sleep_pins_c: sai2a-5 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
+ <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
+ <STM32_PINMUX('D', 12, ANALOG)>; /* SAI2_FS_A */
+ };
+ };
+
sai2b_pins_a: sai2b-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
@@ -1065,6 +1084,19 @@ pins {
};
};
+ sai2b_pins_c: sai2a-4 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+ bias-disable;
+ };
+ };
+
+ sai2b_sleep_pins_c: sai2a-sleep-5 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+ };
+ };
+
sai4a_pins_a: sai4a-0 {
pins {
pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
Add new mux option for SAI2 pins, this is used on AV96 board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org --- V4: New patch V5: No change --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 32 ++++++++++++++++++++++++ 1 file changed, 32 insertions(+)