[V5,20/20] ARM: dts: stm32: Rename LEDs to match silkscreen on AV96

Commit Message

Marek Vasut April 22, 2020, 10:46 a.m. UTC

The LED labels do not match the silkscreen on the board, fix it.

Reviewed-by: Manivannan Sadhasivam <[e-mail]>
Signed-off-by: Marek Vasut <[e-mail]>
Cc: Alexandre Torgue <[e-mail]>
Cc: Manivannan Sadhasivam <[e-mail]>
Cc: Maxime Coquelin <[e-mail]>
Cc: Patrice Chotard <[e-mail]>
Cc: Patrick Delaunay <[e-mail]>
Cc: [e-mail]
To: [e-mail]
---
V2: No change
V3: No change
V4: No change
V5: No change
---
 arch/arm/boot/dts/stm32mp157a-avenger96.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Patch

diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index a1b3baf7564d..271f38acfeb9 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -55,21 +55,21 @@  memory@c0000000 {
 	led {
 		compatible = "gpio-leds";
 		led1 {
-			label = "green:user1";
+			label = "green:user0";
 			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led2 {
-			label = "green:user2";
+			label = "green:user1";
 			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led3 {
-			label = "green:user3";
+			label = "green:user2";
 			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
 			default-state = "off";