diff mbox series

[2/5] soc: ti: add k3 platforms chipid module driver

Message ID 20200423180545.13707-3-grygorii.strashko@ti.com (mailing list archive)
State New, archived
Headers show
Series soc: ti: add k3 platforms chipid module driver | expand

Commit Message

Grygorii Strashko April 23, 2020, 6:05 p.m. UTC 
The Texas Instruments K3 Multicore SoC platforms have chipid module which
is represented by CTRLMMR_xxx_JTAGID register and contains information
about SoC id and revision.
 Bits:
  31-28 VARIANT Device variant
  27-12 PARTNO  Part number
  11-1  MFG     Indicates TI as manufacturer (0x17)
  1             Always 1

This patch adds corresponding driver to identify the TI K3 SoC family and
revision, and registers this information with the SoC bus. It is available
under /sys/devices/soc0/ for user space, and can be checked, where needed,
in Kernel using soc_device_match().

Identification is done by:
- checking MFG to be TI ID
 - retrieving Device variant (revision)
 - retrieving Part number and convert it to the family
 - retrieving machine from DT "/model"

Example J721E:
  # cat /sys/devices/soc0/{machine,family,revision}
  Texas Instruments K3 J721E SoC
  J721E
  SR1.0

Example AM65x:
  # cat /sys/devices/soc0/{machine,family,revision}
  Texas Instruments AM654 Base Board
  AM65X
  SR1.0

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/soc/ti/Kconfig      |  10 +++
 drivers/soc/ti/Makefile     |   1 +
 drivers/soc/ti/k3-socinfo.c | 135 ++++++++++++++++++++++++++++++++++++
 3 files changed, 146 insertions(+)
 create mode 100644 drivers/soc/ti/k3-socinfo.c

Comments

Lokesh Vutla April 24, 2020, 4:36 a.m. UTC | #1 
On 23/04/20 11:35 PM, Grygorii Strashko wrote:
> The Texas Instruments K3 Multicore SoC platforms have chipid module which
> is represented by CTRLMMR_xxx_JTAGID register and contains information
> about SoC id and revision.
>  Bits:
>   31-28 VARIANT Device variant
>   27-12 PARTNO  Part number
>   11-1  MFG     Indicates TI as manufacturer (0x17)
>   1             Always 1
> 
> This patch adds corresponding driver to identify the TI K3 SoC family and
> revision, and registers this information with the SoC bus. It is available
> under /sys/devices/soc0/ for user space, and can be checked, where needed,
> in Kernel using soc_device_match().
> 
> Identification is done by:
> - checking MFG to be TI ID
>  - retrieving Device variant (revision)
>  - retrieving Part number and convert it to the family
>  - retrieving machine from DT "/model"
> 
> Example J721E:
>   # cat /sys/devices/soc0/{machine,family,revision}
>   Texas Instruments K3 J721E SoC
>   J721E
>   SR1.0
> 
> Example AM65x:
>   # cat /sys/devices/soc0/{machine,family,revision}
>   Texas Instruments AM654 Base Board
>   AM65X
>   SR1.0
> 
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>

Very minor comments, other than that:

Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>


> ---
>  drivers/soc/ti/Kconfig      |  10 +++
>  drivers/soc/ti/Makefile     |   1 +
>  drivers/soc/ti/k3-socinfo.c | 135 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 146 insertions(+)
>  create mode 100644 drivers/soc/ti/k3-socinfo.c
> 
> diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
> index 4486e055794c..e192fb788836 100644
> --- a/drivers/soc/ti/Kconfig
> +++ b/drivers/soc/ti/Kconfig
> @@ -91,6 +91,16 @@ config TI_K3_RINGACC
>  	  and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs
>  	  If unsure, say N.
>  
> +config TI_K3_SOCINFO
> +	bool
> +	depends on ARCH_K3 || COMPILE_TEST
> +	select SOC_BUS
> +	select MFD_SYSCON
> +	help
> +	  Include support for the SoC bus socinfo for the TI K3 Multicore SoC
> +	  platforms to provide information about the SoC family and
> +	  variant to user space.
> +
>  endif # SOC_TI
>  
>  config TI_SCI_INTA_MSI_DOMAIN
> diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
> index bec827937a5f..1110e5c98685 100644
> --- a/drivers/soc/ti/Makefile
> +++ b/drivers/soc/ti/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_WKUP_M3_IPC)		+= wkup_m3_ipc.o
>  obj-$(CONFIG_TI_SCI_PM_DOMAINS)		+= ti_sci_pm_domains.o
>  obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN)	+= ti_sci_inta_msi.o
>  obj-$(CONFIG_TI_K3_RINGACC)		+= k3-ringacc.o
> +obj-$(CONFIG_TI_K3_SOCINFO)		+= k3-socinfo.o
> diff --git a/drivers/soc/ti/k3-socinfo.c b/drivers/soc/ti/k3-socinfo.c
> new file mode 100644
> index 000000000000..a0c97b3bd063
> --- /dev/null
> +++ b/drivers/soc/ti/k3-socinfo.c
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * TI K3 SoC info driver
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +#include <linux/sys_soc.h>
> +
> +#define CTRLMMR_WKUP_JTAGID_REG		0
> +/*
> + * Bits:
> + *  31-28 VARIANT	Device variant
> + *  27-12 PARTNO	Part number
> + *  11-1  MFG		Indicates TI as manufacturer (0x17)
> + *  1			Always 1
> + */
> +#define CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT	(28)
> +#define CTRLMMR_WKUP_JTAGID_VARIANT_MASK	GENMASK(31, 28)
> +
> +#define CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT	(12)
> +#define CTRLMMR_WKUP_JTAGID_PARTNO_MASK		GENMASK(27, 12)
> +
> +#define CTRLMMR_WKUP_JTAGID_MFG_SHIFT		(1)
> +#define CTRLMMR_WKUP_JTAGID_MFG_MASK		GENMASK(11, 1)
> +
> +#define CTRLMMR_WKUP_JTAGID_MFG_TI		0x17
> +
> +static const struct k3_soc_id {
> +	unsigned int id;
> +	const char *family_name;
> +} k3_soc_ids[] = {
> +	{ 0xBB5A, "AM65X" },
> +	{ 0xBB64, "J721E" },
> +};
> +
> +static int __init partno_to_names(unsigned int partno,
> +				  struct soc_device_attribute *soc_dev_attr)
> +{
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(k3_soc_ids); i++)
> +		if (partno == k3_soc_ids[i].id) {
> +			soc_dev_attr->family = k3_soc_ids[i].family_name;
> +			return 0;
> +		}
> +
> +	return -EINVAL;
> +}
> +
> +static int __init k3_chipinfo_init(void)
> +{
> +	struct soc_device_attribute *soc_dev_attr;
> +	struct soc_device *soc_dev;
> +	struct device_node *node;
> +	struct regmap *regmap;
> +	u32 jtag_id;
> +	u32 partno_id;
> +	u32 variant;

I think you missed the reverse order here.

> +	u32 mfg;
> +	int ret;
> +
> +	node = of_find_compatible_node(NULL, NULL, "ti,am654-chipid");
> +	if (!node)
> +		return -ENODEV;
> +
> +	regmap = device_node_to_regmap(node);
> +	of_node_put(node);
> +
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	ret = regmap_read(regmap, CTRLMMR_WKUP_JTAGID_REG, &jtag_id);
> +	if (ret < 0)
> +		return ret;
> +
> +	mfg = (jtag_id & CTRLMMR_WKUP_JTAGID_MFG_MASK) >>
> +	       CTRLMMR_WKUP_JTAGID_MFG_SHIFT;
> +
> +	if (mfg != CTRLMMR_WKUP_JTAGID_MFG_TI) {
> +		pr_err("Invalid MFG SoC\n");
> +		return -ENODEV;
> +	}
> +
> +	variant = (jtag_id & CTRLMMR_WKUP_JTAGID_VARIANT_MASK) >>
> +		  CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT;
> +	variant++;
> +
> +	partno_id = (jtag_id & CTRLMMR_WKUP_JTAGID_PARTNO_MASK) >>
> +		 CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT;
> +
> +	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
> +	if (!soc_dev_attr)
> +		return -ENOMEM;
> +
> +	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%x.0", variant);
> +
> +	ret = partno_to_names(partno_id, soc_dev_attr);
> +	if (ret) {
> +		pr_err("Unknown SoC JTAGID[0x%08X]\n", jtag_id);
> +		ret = -ENODEV;
> +		goto err;
> +	}
> +
> +	node = of_find_node_by_path("/");
> +	of_property_read_string(node, "model", &soc_dev_attr->machine);
> +	of_node_put(node);
> +
> +	soc_dev = soc_device_register(soc_dev_attr);
> +	if (IS_ERR(soc_dev)) {
> +		ret = PTR_ERR(soc_dev);
> +		goto err;
> +	}
> +
> +	pr_debug("Family:%s rev:%s JTAGID[0x%08x] Detected\n",
> +		 soc_dev_attr->family,
> +		 soc_dev_attr->revision, jtag_id);

May be pr_info. It is good to print SoC name and revision in the log.

Thanks and regards,
Lokesh
diff mbox series

Patch

diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index 4486e055794c..e192fb788836 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -91,6 +91,16 @@  config TI_K3_RINGACC
 	  and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs
 	  If unsure, say N.
 
+config TI_K3_SOCINFO
+	bool
+	depends on ARCH_K3 || COMPILE_TEST
+	select SOC_BUS
+	select MFD_SYSCON
+	help
+	  Include support for the SoC bus socinfo for the TI K3 Multicore SoC
+	  platforms to provide information about the SoC family and
+	  variant to user space.
+
 endif # SOC_TI
 
 config TI_SCI_INTA_MSI_DOMAIN
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index bec827937a5f..1110e5c98685 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -11,3 +11,4 @@  obj-$(CONFIG_WKUP_M3_IPC)		+= wkup_m3_ipc.o
 obj-$(CONFIG_TI_SCI_PM_DOMAINS)		+= ti_sci_pm_domains.o
 obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN)	+= ti_sci_inta_msi.o
 obj-$(CONFIG_TI_K3_RINGACC)		+= k3-ringacc.o
+obj-$(CONFIG_TI_K3_SOCINFO)		+= k3-socinfo.o
diff --git a/drivers/soc/ti/k3-socinfo.c b/drivers/soc/ti/k3-socinfo.c
new file mode 100644
index 000000000000..a0c97b3bd063
--- /dev/null
+++ b/drivers/soc/ti/k3-socinfo.c
@@ -0,0 +1,135 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI K3 SoC info driver
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/sys_soc.h>
+
+#define CTRLMMR_WKUP_JTAGID_REG		0
+/*
+ * Bits:
+ *  31-28 VARIANT	Device variant
+ *  27-12 PARTNO	Part number
+ *  11-1  MFG		Indicates TI as manufacturer (0x17)
+ *  1			Always 1
+ */
+#define CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT	(28)
+#define CTRLMMR_WKUP_JTAGID_VARIANT_MASK	GENMASK(31, 28)
+
+#define CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT	(12)
+#define CTRLMMR_WKUP_JTAGID_PARTNO_MASK		GENMASK(27, 12)
+
+#define CTRLMMR_WKUP_JTAGID_MFG_SHIFT		(1)
+#define CTRLMMR_WKUP_JTAGID_MFG_MASK		GENMASK(11, 1)
+
+#define CTRLMMR_WKUP_JTAGID_MFG_TI		0x17
+
+static const struct k3_soc_id {
+	unsigned int id;
+	const char *family_name;
+} k3_soc_ids[] = {
+	{ 0xBB5A, "AM65X" },
+	{ 0xBB64, "J721E" },
+};
+
+static int __init partno_to_names(unsigned int partno,
+				  struct soc_device_attribute *soc_dev_attr)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(k3_soc_ids); i++)
+		if (partno == k3_soc_ids[i].id) {
+			soc_dev_attr->family = k3_soc_ids[i].family_name;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+static int __init k3_chipinfo_init(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	struct device_node *node;
+	struct regmap *regmap;
+	u32 jtag_id;
+	u32 partno_id;
+	u32 variant;
+	u32 mfg;
+	int ret;
+
+	node = of_find_compatible_node(NULL, NULL, "ti,am654-chipid");
+	if (!node)
+		return -ENODEV;
+
+	regmap = device_node_to_regmap(node);
+	of_node_put(node);
+
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	ret = regmap_read(regmap, CTRLMMR_WKUP_JTAGID_REG, &jtag_id);
+	if (ret < 0)
+		return ret;
+
+	mfg = (jtag_id & CTRLMMR_WKUP_JTAGID_MFG_MASK) >>
+	       CTRLMMR_WKUP_JTAGID_MFG_SHIFT;
+
+	if (mfg != CTRLMMR_WKUP_JTAGID_MFG_TI) {
+		pr_err("Invalid MFG SoC\n");
+		return -ENODEV;
+	}
+
+	variant = (jtag_id & CTRLMMR_WKUP_JTAGID_VARIANT_MASK) >>
+		  CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT;
+	variant++;
+
+	partno_id = (jtag_id & CTRLMMR_WKUP_JTAGID_PARTNO_MASK) >>
+		 CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%x.0", variant);
+
+	ret = partno_to_names(partno_id, soc_dev_attr);
+	if (ret) {
+		pr_err("Unknown SoC JTAGID[0x%08X]\n", jtag_id);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	node = of_find_node_by_path("/");
+	of_property_read_string(node, "model", &soc_dev_attr->machine);
+	of_node_put(node);
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		ret = PTR_ERR(soc_dev);
+		goto err;
+	}
+
+	pr_debug("Family:%s rev:%s JTAGID[0x%08x] Detected\n",
+		 soc_dev_attr->family,
+		 soc_dev_attr->revision, jtag_id);
+
+	return 0;
+
+err:
+	kfree(soc_dev_attr->revision);
+	kfree(soc_dev_attr);
+	return ret;
+}
+
+subsys_initcall(k3_chipinfo_init);