diff mbox series

[v2,2/3] dt-bindings: usb: atmel: Mark EP child node as deprecated

Message ID 20200507155651.1094142-3-gregory.clement@bootlin.com (mailing list archive)
State Mainlined
Commit 4db120d93d53f668770f07a41567a404b88891fb
Headers show
Series [v2,1/3] usb: gadget: udc: atmel: Don't use DT to configure end point | expand

Commit Message

Gregory CLEMENT May 7, 2020, 3:56 p.m. UTC 
There is no need to describe the end point in the deice tree. These
properties won't be use anymore, so mark them as deprecated to keep
the old device tree documented.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 .../devicetree/bindings/usb/atmel-usb.txt     | 56 +------------------
 1 file changed, 3 insertions(+), 53 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 44e80153b148..423b99a8fd97 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -88,13 +88,15 @@  Required properties:
  - clock-names: Should contain two strings
 		"pclk" for the peripheral clock
 		"hclk" for the host clock
+
+Deprecated property:
  - ep childnode: To specify the number of endpoints and their properties.
 
 Optional properties:
  - atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether
    vbus is present (USB is connected).
 
-Required child node properties:
+Deprecated child node properties:
  - name: Name of the endpoint.
  - reg: Num of the endpoint.
  - atmel,fifo-size: Size of the fifo.
@@ -112,56 +114,4 @@  usb2: gadget@fff78000 {
 	clocks = <&utmi>, <&udphs_clk>;
 	clock-names = "hclk", "pclk";
 	atmel,vbus-gpio = <&pioB 19 0>;
-
-	ep@0 {
-		reg = <0>;
-		atmel,fifo-size = <64>;
-		atmel,nb-banks = <1>;
-	};
-
-	ep@1 {
-		reg = <1>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <2>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
-
-	ep@2 {
-		reg = <2>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <2>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
-
-	ep@3 {
-		reg = <3>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-	};
-
-	ep@4 {
-		reg = <4>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-	};
-
-	ep@5 {
-		reg = <5>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
-
-	ep@6 {
-		reg = <6>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
 };