diff mbox series

[03/16] ARM: dts: at91: sama5d2: Move flx3 definitions in the SoC dtsi

Message ID 20200514050301.147442-4-tudor.ambarus@microchip.com (mailing list archive)
State Mainlined
Commit 445a9d6e562a656f6f9bd4acfd5d55bd415f206e
Headers show
Series ARM: dts: at91: sama5d2: Rework Flexcom definitions | expand

Commit Message

Tudor Ambarus May 14, 2020, 5:03 a.m. UTC 
From: Tudor Ambarus <tudor.ambarus@microchip.com>

The Flexcom IP is part of the sama5d2 SoC. Move the flx3 node together
with its function definitions in sama5d2.dtsi. Boards will just fill
the pins and enable the desired functions.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 arch/arm/boot/dts/at91-kizbox3_common.dtsi  | 13 ---------
 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 13 +--------
 arch/arm/boot/dts/at91-sama5d2_icp.dts      |  6 -----
 arch/arm/boot/dts/sama5d2.dtsi              | 29 +++++++++++++++++++++
 4 files changed, 30 insertions(+), 31 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index ee6f036aa008..4351a8d32225 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -325,21 +325,8 @@ 
 	status = "disabled";
 
 	uart8: serial@200 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0x200 0x400>;
-		interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-			| AT91_XDMAC_DT_PERID(17))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-			| AT91_XDMAC_DT_PERID(18))>;
-		dma-names = "tx", "rx";
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
-		clock-names = "usart";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx3_default>;
-		atmel,fifo-size = <32>;
 		atmel,use-dma-rx;
 		atmel,use-dma-tx;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 5f4a7c8725f3..abbf14e29d85 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -179,26 +179,15 @@ 
 				status = "disabled";
 
 				uart8: serial@200 {
-					compatible = "atmel,at91sam9260-usart";
-					reg = <0x200 0x200>;
-					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
-					clock-names = "usart";
+					dmas = <0>, <0>;
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx3_default>;
-					atmel,fifo-size = <32>;
 					status = "disabled"; /* Conflict with isc. */
 				};
 
 				spi5: spi@400 {
-					compatible = "atmel,at91rm9200-spi";
-					reg = <0x400 0x200>;
-					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
-					clock-names = "spi_clk";
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx3_default>;
-					atmel,fifo-size = <16>;
 					status = "disabled"; /* Conflict with isc. */
 				};
 			};
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 7216a794f4f6..8a4336e12a60 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -185,14 +185,8 @@ 
 	status = "okay";
 
 	spi5: spi@400 {
-		compatible = "atmel,at91rm9200-spi";
-		reg = <0x400 0x200>;
-		interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
-		clock-names = "spi_clk";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
-		atmel,fifo-size = <16>;
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 5c31e4068eb5..5e84cde8226a 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -804,6 +804,35 @@ 
 				#size-cells = <1>;
 				ranges = <0x0 0xfc014000 0x800>;
 				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "spi_clk";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx4: flexcom@fc018000 {