@@ -348,7 +348,7 @@ int bcm2835_audio_write(struct bcm2835_alsa_stream *alsa_stream,
/* Send the message to the videocore */
status = vchi_bulk_queue_transmit(instance->service,
src, count,
- VCHI_FLAGS_BLOCK_UNTIL_DATA_READ,
+ VCHIQ_BULK_MODE_BLOCKING,
NULL);
} else {
while (count > 0) {
@@ -9,6 +9,7 @@
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm-indirect.h>
+#include "interface/vchiq_arm/vchiq_if.h"
#include "interface/vchi/vchi.h"
#define MAX_SUBSTREAMS (8)
@@ -105,14 +105,14 @@ extern int32_t vchi_held_msg_release(struct vchi_held_msg *message);
extern int32_t vchi_bulk_queue_receive(struct vchi_service *service,
void *data_dst,
uint32_t data_size,
- enum vchi_flags flags,
+ enum vchiq_bulk_mode mode,
void *transfer_handle);
// Routine to queue up data ready for transfer to the other (once they have signalled they are ready)
extern int32_t vchi_bulk_queue_transmit(struct vchi_service *service,
const void *data_src,
uint32_t data_size,
- enum vchi_flags flags,
+ enum vchiq_bulk_mode mode,
void *transfer_handle);
/******************************************************************************
@@ -4,15 +4,6 @@
#ifndef VCHI_COMMON_H_
#define VCHI_COMMON_H_
-//flags used when sending messages (must be bitmapped)
-enum vchi_flags {
- VCHI_FLAGS_NONE = 0x0,
- VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE = 0x1, // waits for message to be received, or sent (NB. not the same as being seen on other side)
- VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE = 0x2, // run a callback when message sent
- VCHI_FLAGS_BLOCK_UNTIL_QUEUED = 0x4, // return once the transfer is in a queue ready to go
- VCHI_FLAGS_BLOCK_UNTIL_DATA_READ = 0x10,
-};
-
//callback reasons when an event occurs on a service
enum vchi_callback_reason {
/*
@@ -3,6 +3,7 @@
#include <linux/module.h>
#include <linux/types.h>
+#include "vchiq_if.h"
#include "../vchi/vchi.h"
#include "vchiq.h"
#include "vchiq_core.h"
@@ -57,30 +58,11 @@ EXPORT_SYMBOL(vchi_queue_kernel_message);
*
***********************************************************/
int32_t vchi_bulk_queue_receive(struct vchi_service *service, void *data_dst,
- uint32_t data_size, enum vchi_flags flags,
+ uint32_t data_size, enum vchiq_bulk_mode mode,
void *bulk_handle)
{
- enum vchiq_bulk_mode mode;
enum vchiq_status status;
- switch ((int)flags) {
- case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE
- | VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
- WARN_ON(!service->callback);
- mode = VCHIQ_BULK_MODE_CALLBACK;
- break;
- case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE:
- mode = VCHIQ_BULK_MODE_BLOCKING;
- break;
- case VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
- case VCHI_FLAGS_NONE:
- mode = VCHIQ_BULK_MODE_NOCALLBACK;
- break;
- default:
- WARN(1, "unsupported message\n");
- return VCHIQ_ERROR;
- }
-
while (1) {
status = vchiq_bulk_receive(service->handle, data_dst,
data_size, bulk_handle, mode);
@@ -116,31 +98,11 @@ EXPORT_SYMBOL(vchi_bulk_queue_receive);
int32_t vchi_bulk_queue_transmit(struct vchi_service *service,
const void *data_src,
uint32_t data_size,
- enum vchi_flags flags,
+ enum vchiq_bulk_mode mode,
void *bulk_handle)
{
- enum vchiq_bulk_mode mode;
enum vchiq_status status;
- switch ((int)flags) {
- case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE
- | VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
- WARN_ON(!service->callback);
- mode = VCHIQ_BULK_MODE_CALLBACK;
- break;
- case VCHI_FLAGS_BLOCK_UNTIL_DATA_READ:
- case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE:
- mode = VCHIQ_BULK_MODE_BLOCKING;
- break;
- case VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
- case VCHI_FLAGS_NONE:
- mode = VCHIQ_BULK_MODE_NOCALLBACK;
- break;
- default:
- WARN(1, "unsupported message\n");
- return VCHIQ_ERROR;
- }
-
while (1) {
status = vchiq_bulk_transmit(service->handle, data_src,
data_size, bulk_handle, mode);
@@ -19,6 +19,7 @@
#include <linux/slab.h>
#include <linux/types.h>
+#include "interface/vchiq_arm/vchiq_if.h"
#include "vc_sm_cma_vchi.h"
#define VC_SM_VER 1
@@ -32,6 +32,7 @@
#include "vc-sm-cma/vc_sm_knl.h"
+#include "interface/vchiq_arm/vchiq_if.h"
#include "interface/vchi/vchi.h"
/*
@@ -298,8 +299,7 @@ static void buffer_to_host_work_cb(struct work_struct *work)
* of 4 bytes
*/
(len + 3) & ~3,
- VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE |
- VCHI_FLAGS_BLOCK_UNTIL_QUEUED,
+ VCHIQ_BULK_MODE_CALLBACK,
msg_context);
vchi_service_release(instance->service);
vchi has a set of transfer flags which almost map 1:1 to vchiq's own transfer modes. For the sake of simplicity let's use the later and delete vchi's. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> --- .../bcm2835-audio/bcm2835-vchiq.c | 2 +- .../vc04_services/bcm2835-audio/bcm2835.h | 1 + .../vc04_services/interface/vchi/vchi.h | 4 +- .../interface/vchi/vchi_common.h | 9 ---- .../interface/vchiq_arm/vchiq_shim.c | 44 ++----------------- .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.c | 1 + .../vc04_services/vchiq-mmal/mmal-vchiq.c | 4 +- 7 files changed, 10 insertions(+), 55 deletions(-)