diff mbox series

[3/5] ARM: dts: stm32: add usart3 node to stm32mp157c-ev1

Message ID 20200528074029.24962-4-erwan.leray@st.com (mailing list archive)
State New, archived
Headers show
Series STM32 add usart nodes support | expand

Commit Message

Erwan LE RAY May 28, 2020, 7:40 a.m. UTC 
Adds the usart3 node to stm32mp157c-ev1 board. usart3 pins are connected to
GPIO Expansion connector. usart3 is disabled by default.

Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index b19056557ef0..e56dde8d20f8 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -19,6 +19,7 @@ 
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &usart3;
 		ethernet0 = &ethernet0;
 	};
 
@@ -341,6 +342,15 @@ 
 	};
 };
 
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_b>;
+	pinctrl-1 = <&usart3_sleep_pins_b>;
+	pinctrl-2 = <&usart3_idle_pins_b>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
 	status = "okay";