diff mbox series

[v9,2/9] mtd: spinand: Use nanddev_get_ecc_conf() when relevant

Message ID 20200602143124.29553-3-miquel.raynal@bootlin.com (mailing list archive)
State New, archived
Headers show
Series Preparation to the generic ECC engine abstraction | expand

Commit Message

Miquel Raynal June 2, 2020, 2:31 p.m. UTC
Instead of accessing ->strength/step_size directly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/spi/core.c     | 6 +++---
 drivers/mtd/nand/spi/macronix.c | 7 ++++---
 drivers/mtd/nand/spi/toshiba.c  | 6 +++---
 3 files changed, 10 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 6f6ec8aa143d..56019de28a90 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -419,7 +419,7 @@  static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status)
 		 * fixed, so let's return the maximum possible value so that
 		 * wear-leveling layers move the data immediately.
 		 */
-		return nand->eccreq.strength;
+		return nanddev_get_ecc_conf(nand)->strength;
 
 	case STATUS_ECC_UNCOR_ERROR:
 		return -EBADMSG;
@@ -1091,8 +1091,8 @@  static int spinand_init(struct spinand_device *spinand)
 	mtd->oobavail = ret;
 
 	/* Propagate ECC information to mtd_info */
-	mtd->ecc_strength = nand->eccreq.strength;
-	mtd->ecc_step_size = nand->eccreq.step_size;
+	mtd->ecc_strength = nanddev_get_ecc_conf(nand)->strength;
+	mtd->ecc_step_size = nanddev_get_ecc_conf(nand)->step_size;
 
 	return 0;
 
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index 0f900f3aa21a..9ff8debd5994 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -84,10 +84,11 @@  static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
 		 * data around if it's not necessary.
 		 */
 		if (mx35lf1ge4ab_get_eccsr(spinand, &eccsr))
-			return nand->eccreq.strength;
+			return nanddev_get_ecc_conf(nand)->strength;
 
-		if (WARN_ON(eccsr > nand->eccreq.strength || !eccsr))
-			return nand->eccreq.strength;
+		if (WARN_ON(eccsr > nanddev_get_ecc_conf(nand)->strength ||
+			    !eccsr))
+			return nanddev_get_ecc_conf(nand)->strength;
 
 		return eccsr;
 
diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
index bc801d83343e..21fde2875674 100644
--- a/drivers/mtd/nand/spi/toshiba.c
+++ b/drivers/mtd/nand/spi/toshiba.c
@@ -90,12 +90,12 @@  static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
 		 * data around if it's not necessary.
 		 */
 		if (spi_mem_exec_op(spinand->spimem, &op))
-			return nand->eccreq.strength;
+			return nanddev_get_ecc_conf(nand)->strength;
 
 		mbf >>= 4;
 
-		if (WARN_ON(mbf > nand->eccreq.strength || !mbf))
-			return nand->eccreq.strength;
+		if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf))
+			return nanddev_get_ecc_conf(nand)->strength;
 
 		return mbf;