diff mbox series

[v2] ARM: dts: rockchip: Add marvell BT irq config

Message ID 20200612130219.v2.1.I66864be898aa835ccb66b6cd5220d0b082338a81@changeid (mailing list archive)
State Mainlined
Commit 6c2b99a2e7a073575b4ee91abf7d16470991c1f4
Headers show
Series [v2] ARM: dts: rockchip: Add marvell BT irq config | expand

Commit Message

Abhishek Pandit-Subedi June 12, 2020, 8:02 p.m. UTC 
Veyron Jaq and Mighty both use the Marvel 8897 WiFi+BT chip. Add wakeup
and pinctrl block to devicetree so the btmrvl driver can correctly
configure the wakeup interrupt.

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
The Veyron Mighty Chromebook (rk3288 based board) is missing the wake
configuration for Bluetooth. Without this change, the wake irq was not
configurable and wake on Bluetooth was broken.

I verified this change with additional changes in the Bluetooth driver
(the series is at https://patchwork.kernel.org/cover/11599101/). The
driver changes are not necessary for this dts change and shouldn't block
it.


Changes in v2:
- Move sdio0 ahead of sdmmc

 arch/arm/boot/dts/rk3288-veyron-jaq.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Heiko Stuebner June 17, 2020, 8:45 a.m. UTC | #1 
On Fri, 12 Jun 2020 13:02:48 -0700, Abhishek Pandit-Subedi wrote:
> Veyron Jaq and Mighty both use the Marvel 8897 WiFi+BT chip. Add wakeup
> and pinctrl block to devicetree so the btmrvl driver can correctly
> configure the wakeup interrupt.

Applied, thanks!

[1/1] ARM: dts: rockchip: Add marvell BT irq config
      commit: 6c2b99a2e7a073575b4ee91abf7d16470991c1f4

Best regards,
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index 171ba6185b6d39..c15d6865f5a390 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -44,6 +44,21 @@  regulator-state-mem {
 	};
 };
 
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	btmrvl: btmrvl@2 {
+		compatible = "marvell,sd8897-bt";
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>;
+		marvell,wakeup-pin = /bits/ 16 <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>;
+	};
+};
+
 &sdmmc {
 	disable-wp;
 	pinctrl-names = "default";