diff mbox series

[v6,02/13] dt-bindings: panel: Convert rocktech, jh057n00900 to yaml

Message ID 20200701103126.1512615-3-megous@megous.com (mailing list archive)
State New, archived
Headers show
Series Add support for PinePhone LCD panel | expand

Commit Message

Ondřej Jirman July 1, 2020, 10:31 a.m. UTC
Convert Rocktech MIPI DSI panel driver from txt to yaml bindings.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 .../display/panel/rocktech,jh057n00900.txt    | 23 -------
 .../display/panel/rocktech,jh057n00900.yaml   | 66 +++++++++++++++++++
 2 files changed, 66 insertions(+), 23 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml

Comments

Guido Günther July 1, 2020, 3:58 p.m. UTC | #1
Hi Ondrej,
On Wed, Jul 01, 2020 at 12:31:15PM +0200, Ondrej Jirman wrote:
> Convert Rocktech MIPI DSI panel driver from txt to yaml bindings.
> 
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> ---
>  .../display/panel/rocktech,jh057n00900.txt    | 23 -------
>  .../display/panel/rocktech,jh057n00900.yaml   | 66 +++++++++++++++++++
>  2 files changed, 66 insertions(+), 23 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
>  create mode 100644
> Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml

Thanks for the conversion! Shouldn't we switch to `sitronix-st7703.yaml`
as well in this patch?
Cheers,
 -- Guido

> 
> diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
> deleted file mode 100644
> index a372c5d84695..000000000000
> --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel
> -
> -Required properties:
> -- compatible: should be "rocktech,jh057n00900"
> -- reg: DSI virtual channel of the peripheral
> -- reset-gpios: panel reset gpio
> -- backlight: phandle of the backlight device attached to the panel
> -- vcc-supply: phandle of the regulator that provides the vcc supply voltage.
> -- iovcc-supply: phandle of the regulator that provides the iovcc supply
> -  voltage.
> -
> -Example:
> -
> -	&mipi_dsi {
> -		panel@0 {
> -			compatible = "rocktech,jh057n00900";
> -			reg = <0>;
> -			backlight = <&backlight>;
> -			reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
> -			vcc-supply = <&reg_2v8_p>;
> -			iovcc-supply = <&reg_1v8_p>;
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
> new file mode 100644
> index 000000000000..928ba42e7f8d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
> +
> +maintainers:
> +  - Ondrej Jirman <megi@xff.cz>
> +
> +description: |
> +             Rocktech JH057N00900 is a 720x1440 TFT LCD panel
> +             connected using a MIPI-DSI video interface.
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: rocktech,jh057n00900
> +
> +  reg:
> +    maxItems: 1
> +    description: DSI virtual channel
> +
> +  vcc-supply:
> +    description: Panel power supply
> +
> +  iovcc-supply:
> +    description: I/O voltage supply
> +
> +  reset-gpios:
> +    description: GPIO used for the reset pin
> +    maxItems: 1
> +
> +  backlight:
> +    description: Backlight used by the panel
> +    $ref: "/schemas/types.yaml#/definitions/phandle"
> +
> +required:
> +  - compatible
> +  - reg
> +  - vcc-supply
> +  - iovcc-supply
> +  - reset-gpios
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      panel@0 {
> +        compatible = "rocktech,jh057n00900";
> +        reg = <0>;
> +        vcc-supply = <&reg_2v8_p>;
> +        iovcc-supply = <&reg_1v8_p>;
> +        reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
> +        backlight = <&backlight>;
> +      };
> +    };
> +...
> -- 
> 2.27.0
>
Sam Ravnborg July 1, 2020, 4:07 p.m. UTC | #2
On Wed, Jul 01, 2020 at 05:58:57PM +0200, Guido Günther wrote:
> Hi Ondrej,
> On Wed, Jul 01, 2020 at 12:31:15PM +0200, Ondrej Jirman wrote:
> > Convert Rocktech MIPI DSI panel driver from txt to yaml bindings.
> > 
> > Signed-off-by: Ondrej Jirman <megous@megous.com>
> > ---
> >  .../display/panel/rocktech,jh057n00900.txt    | 23 -------
> >  .../display/panel/rocktech,jh057n00900.yaml   | 66 +++++++++++++++++++
> >  2 files changed, 66 insertions(+), 23 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
> 
> Thanks for the conversion! Shouldn't we switch to `sitronix-st7703.yaml`
> as well in this patch?

That would be good if this rename is included.
Otherwise we will just have to do it later.

	Sam
Ondřej Jirman July 1, 2020, 4:32 p.m. UTC | #3
Hello Guido,

On Wed, Jul 01, 2020 at 05:58:57PM +0200, Guido Günther wrote:
> Hi Ondrej,
> On Wed, Jul 01, 2020 at 12:31:15PM +0200, Ondrej Jirman wrote:
> > Convert Rocktech MIPI DSI panel driver from txt to yaml bindings.
> > 
> > Signed-off-by: Ondrej Jirman <megous@megous.com>
> > ---
> >  .../display/panel/rocktech,jh057n00900.txt    | 23 -------
> >  .../display/panel/rocktech,jh057n00900.yaml   | 66 +++++++++++++++++++
> >  2 files changed, 66 insertions(+), 23 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
> 
> Thanks for the conversion! Shouldn't we switch to `sitronix-st7703.yaml`
> as well in this patch?

Names of yaml files should be according to one of the compatibles.

And thank you for your review of the patches.

regards,
	o.

> Cheers,
>  -- Guido
> 
> > 
> > diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
> > deleted file mode 100644
> > index a372c5d84695..000000000000
> > --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
> > +++ /dev/null
> > @@ -1,23 +0,0 @@
> > -Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel
> > -
> > -Required properties:
> > -- compatible: should be "rocktech,jh057n00900"
> > -- reg: DSI virtual channel of the peripheral
> > -- reset-gpios: panel reset gpio
> > -- backlight: phandle of the backlight device attached to the panel
> > -- vcc-supply: phandle of the regulator that provides the vcc supply voltage.
> > -- iovcc-supply: phandle of the regulator that provides the iovcc supply
> > -  voltage.
> > -
> > -Example:
> > -
> > -	&mipi_dsi {
> > -		panel@0 {
> > -			compatible = "rocktech,jh057n00900";
> > -			reg = <0>;
> > -			backlight = <&backlight>;
> > -			reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
> > -			vcc-supply = <&reg_2v8_p>;
> > -			iovcc-supply = <&reg_1v8_p>;
> > -		};
> > -	};
> > diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
> > new file mode 100644
> > index 000000000000..928ba42e7f8d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
> > @@ -0,0 +1,66 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
> > +
> > +maintainers:
> > +  - Ondrej Jirman <megi@xff.cz>
> > +
> > +description: |
> > +             Rocktech JH057N00900 is a 720x1440 TFT LCD panel
> > +             connected using a MIPI-DSI video interface.
> > +
> > +allOf:
> > +  - $ref: panel-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: rocktech,jh057n00900
> > +
> > +  reg:
> > +    maxItems: 1
> > +    description: DSI virtual channel
> > +
> > +  vcc-supply:
> > +    description: Panel power supply
> > +
> > +  iovcc-supply:
> > +    description: I/O voltage supply
> > +
> > +  reset-gpios:
> > +    description: GPIO used for the reset pin
> > +    maxItems: 1
> > +
> > +  backlight:
> > +    description: Backlight used by the panel
> > +    $ref: "/schemas/types.yaml#/definitions/phandle"
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - vcc-supply
> > +  - iovcc-supply
> > +  - reset-gpios
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    dsi {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +      panel@0 {
> > +        compatible = "rocktech,jh057n00900";
> > +        reg = <0>;
> > +        vcc-supply = <&reg_2v8_p>;
> > +        iovcc-supply = <&reg_1v8_p>;
> > +        reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
> > +        backlight = <&backlight>;
> > +      };
> > +    };
> > +...
> > -- 
> > 2.27.0
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
deleted file mode 100644
index a372c5d84695..000000000000
--- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
+++ /dev/null
@@ -1,23 +0,0 @@ 
-Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel
-
-Required properties:
-- compatible: should be "rocktech,jh057n00900"
-- reg: DSI virtual channel of the peripheral
-- reset-gpios: panel reset gpio
-- backlight: phandle of the backlight device attached to the panel
-- vcc-supply: phandle of the regulator that provides the vcc supply voltage.
-- iovcc-supply: phandle of the regulator that provides the iovcc supply
-  voltage.
-
-Example:
-
-	&mipi_dsi {
-		panel@0 {
-			compatible = "rocktech,jh057n00900";
-			reg = <0>;
-			backlight = <&backlight>;
-			reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-			vcc-supply = <&reg_2v8_p>;
-			iovcc-supply = <&reg_1v8_p>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
new file mode 100644
index 000000000000..928ba42e7f8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
@@ -0,0 +1,66 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+
+maintainers:
+  - Ondrej Jirman <megi@xff.cz>
+
+description: |
+             Rocktech JH057N00900 is a 720x1440 TFT LCD panel
+             connected using a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: rocktech,jh057n00900
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vcc-supply:
+    description: Panel power supply
+
+  iovcc-supply:
+    description: I/O voltage supply
+
+  reset-gpios:
+    description: GPIO used for the reset pin
+    maxItems: 1
+
+  backlight:
+    description: Backlight used by the panel
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - iovcc-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "rocktech,jh057n00900";
+        reg = <0>;
+        vcc-supply = <&reg_2v8_p>;
+        iovcc-supply = <&reg_1v8_p>;
+        reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+        backlight = <&backlight>;
+      };
+    };
+...