| Message ID | 20200702112041.1942707-2-megous@megous.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for vibrator motor for TBS A711 Tablet | expand |
On Thu, 02 Jul 2020 13:20:38 +0200, Ondrej Jirman wrote: > It is possible to turn the motor on/off just by enabling/disabling > the vcc-supply. Change the binding to require either enable-gpios > or vcc-supply or both. > > Signed-off-by: Ondrej Jirman <megous@megous.com> > --- > Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml index 2384465eaa19..082ac06471db 100644 --- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml +++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml @@ -24,7 +24,12 @@ properties: required: - compatible - - enable-gpios + +anyOf: + - required: + - enable-gpios + - required: + - vcc-supply additionalProperties: false
It is possible to turn the motor on/off just by enabling/disabling the vcc-supply. Change the binding to require either enable-gpios or vcc-supply or both. Signed-off-by: Ondrej Jirman <megous@megous.com> --- Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)