@@ -35,7 +35,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
similarity index 99%
rename from arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
rename to arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -11,9 +11,6 @@
#include "rk3399-opp.dtsi"
/ {
- model = "Radxa ROCK Pi 4";
- compatible = "radxa,rockpi4", "rockchip,rk3399";
-
chosen {
stdout-path = "serial2:1500000n8";
};
new file mode 100644
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+ model = "Radxa ROCK Pi 4A";
+ compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";
+};
ROCKPi 4 has 3 variants of hardware platforms called RockPI 4A, 4B, and 4C. - ROCKPi 4A has no Wif/BT. - ROCKPi 4B has AP6256 Wifi/BT, PoE. - ROCKPi 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled GPIO pin change compared to 4B, 4C So move common nodes, properties into dtsi file and include on respective variant dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v2: - update commit message - add radxa,rockpi4a arch/arm64/boot/dts/rockchip/Makefile | 2 +- .../{rk3399-rock-pi-4.dts => rk3399-rock-pi-4.dtsi} | 3 --- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts | 13 +++++++++++++ 3 files changed, 14 insertions(+), 4 deletions(-) rename arch/arm64/boot/dts/rockchip/{rk3399-rock-pi-4.dts => rk3399-rock-pi-4.dtsi} (99%) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts