diff mbox series

[2/3] ARM: configs: at91: sama5: enable bridge and VLAN filtering

Message ID 20200723162434.1983643-2-codrin.ciubotariu@microchip.com (mailing list archive)
State Mainlined
Commit 33d8c87ef47f5303dca851f320611552bc84e32f
Headers show
Series [1/3] ARM: configs: at91: sama5: add support for KSZ ethernet switches | expand

Commit Message

Codrin Ciubotariu July 23, 2020, 4:24 p.m. UTC 
From: Razvan Stefanescu <razvan.stefanescu@microchip.com>

These modules are needed to configure bridges in Linux, to take full
advantage of the KSZ switch capabilities.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
 arch/arm/configs/sama5_defconfig | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 123b95c1447a..f4d71ffcb6e9 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -49,7 +49,10 @@  CONFIG_IP_PNP_RARP=y
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
 CONFIG_IPV6_SIT_6RD=y
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_NET_DSA=m
+CONFIG_VLAN_8021Q=m
 CONFIG_CAN=y
 CONFIG_CAN_AT91=y
 CONFIG_CAN_M_CAN=y