diff mbox series

[v3,5/9] dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml

Message ID 20200724141837.4542-6-lokeshvutla@ti.com (mailing list archive)
State New, archived
Headers show
Series irqchip: ti, sci-intr/inta: Update the dt bindings to accept different interrupt parents | expand

Commit Message

Lokesh Vutla July 24, 2020, 2:18 p.m. UTC
In order to automate the verification of DT nodes convert
ti,sci-intr.txt ti,sci-intr.yaml.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 .../interrupt-controller/ti,sci-intr.txt      |  83 --------------
 .../interrupt-controller/ti,sci-intr.yaml     | 102 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 103 insertions(+), 84 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
deleted file mode 100644
index 8b56b2de1c73..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
+++ /dev/null
@@ -1,83 +0,0 @@ 
-Texas Instruments K3 Interrupt Router
-=====================================
-
-The Interrupt Router (INTR) module provides a mechanism to mux M
-interrupt inputs to N interrupt outputs, where all M inputs are selectable
-to be driven per N output. An Interrupt Router can either handle edge triggered
-or level triggered interrupts and that is fixed in hardware.
-
-                                 Interrupt Router
-                             +----------------------+
-                             |  Inputs     Outputs  |
-        +-------+            | +------+    +-----+  |
-        | GPIO  |----------->| | irq0 |    |  0  |  |       Host IRQ
-        +-------+            | +------+    +-----+  |      controller
-                             |    .           .     |      +-------+
-        +-------+            |    .           .     |----->|  IRQ  |
-        | INTA  |----------->|    .           .     |      +-------+
-        +-------+            |    .        +-----+  |
-                             | +------+    |  N  |  |
-                             | | irqM |    +-----+  |
-                             | +------+             |
-                             |                      |
-                             +----------------------+
-
-There is one register per output (MUXCNTL_N) that controls the selection.
-Configuration of these MUXCNTL_N registers is done by a system controller
-(like the Device Memory and Security Controller on K3 AM654 SoC). System
-controller will keep track of the used and unused registers within the Router.
-Driver should request the system controller to get the range of GIC IRQs
-assigned to the requesting hosts. It is the drivers responsibility to keep
-track of Host IRQs.
-
-Communication between the host processor running an OS and the system
-controller happens through a protocol called TI System Control Interface
-(TISCI protocol). For more details refer:
-Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-TISCI Interrupt Router Node:
-----------------------------
-Required Properties:
-- compatible:		Must be "ti,sci-intr".
-- ti,intr-trigger-type:	Should be one of the following:
-			1: If intr supports edge triggered interrupts.
-			4: If intr supports level triggered interrupts.
-- interrupt-controller:	Identifies the node as an interrupt controller
-- #interrupt-cells:	Specifies the number of cells needed to encode an
-			interrupt source. The value should be 1.
-			First cell should contain interrupt router input number
-			as specified by hardware.
-- ti,sci:		Phandle to TI-SCI compatible System controller node.
-- ti,sci-dev-id:	TISCI device id of interrupt controller.
-- ti,interrupt-ranges:	Set of triplets containing ranges that convert
-			the INTR output interrupt numbers to parent's
-			interrupt number. Each triplet has following entries:
-			- First entry specifies the base for intr output irq
-			- Second entry specifies the base for parent irqs
-			- Third entry specifies the limit
-
-For more details on TISCI IRQ resource management refer:
-http://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html
-
-Example:
---------
-The following example demonstrates both interrupt router node and the consumer
-node(main gpio) on the AM654 SoC:
-
-main_gpio_intr: interrupt-controller0 {
-	compatible = "ti,sci-intr";
-	ti,intr-trigger-type = <1>;
-	interrupt-controller;
-	interrupt-parent = <&gic500>;
-	#interrupt-cells = <1>;
-	ti,sci = <&dmsc>;
-	ti,sci-dev-id = <131>;
-	ti,interrupt-ranges = <0 360 32>;
-};
-
-main_gpio0: gpio@600000 {
-	...
-	interrupt-parent = <&main_gpio_intr>;
-	interrupts = <192>, <193>, <194>, <195>, <196>, <197>;
-	...
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
new file mode 100644
index 000000000000..f7a3e51a5212
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
@@ -0,0 +1,102 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Interrupt Router
+
+maintainers:
+  - Lokesh Vutla <lokeshvutla@ti.com>
+
+allOf:
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+description: |
+  The Interrupt Router (INTR) module provides a mechanism to mux M
+  interrupt inputs to N interrupt outputs, where all M inputs are selectable
+  to be driven per N output. An Interrupt Router can either handle edge
+  triggered or level triggered interrupts and that is fixed in hardware.
+
+                                   Interrupt Router
+                               +----------------------+
+                               |  Inputs     Outputs  |
+          +-------+            | +------+    +-----+  |
+          | GPIO  |----------->| | irq0 |    |  0  |  |       Host IRQ
+          +-------+            | +------+    +-----+  |      controller
+                               |    .           .     |      +-------+
+          +-------+            |    .           .     |----->|  IRQ  |
+          | INTA  |----------->|    .           .     |      +-------+
+          +-------+            |    .        +-----+  |
+                               | +------+    |  N  |  |
+                               | | irqM |    +-----+  |
+                               | +------+             |
+                               |                      |
+                               +----------------------+
+
+  There is one register per output (MUXCNTL_N) that controls the selection.
+  Configuration of these MUXCNTL_N registers is done by a system controller
+  (like the Device Memory and Security Controller on K3 AM654 SoC). System
+  controller will keep track of the used and unused registers within the Router.
+  Driver should request the system controller to get the range of GIC IRQs
+  assigned to the requesting hosts. It is the drivers responsibility to keep
+  track of Host IRQs.
+
+  Communication between the host processor running an OS and the system
+  controller happens through a protocol called TI System Control Interface
+  (TISCI protocol).
+
+properties:
+  compatible:
+    const: ti,sci-intr
+
+  ti,intr-trigger-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 4]
+    description: |
+      Should be one of the following.
+        1 = If intr supports edge triggered interrupts.
+        4 = If intr supports level triggered interrupts.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+    description: |
+      The 1st cell should contain interrupt router input hw number.
+
+  ti,interrupt-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Interrupt ranges that converts the INTR output hw irq numbers
+      to parents's input interrupt numbers.
+      - items:
+          items:
+            - description: |
+                "output_irq" specifies the base for intr output irq
+            - description: |
+                "parent's input irq" specifies the base for parent irq
+            - description: |
+                "limit" specifies the limit for translation
+
+required:
+  - compatible
+  - ti,intr-trigger-type
+  - interrupt-controller
+  - '#interrupt-cells'
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,interrupt-ranges
+
+examples:
+  - |
+    main_gpio_intr: interrupt-controller0 {
+        compatible = "ti,sci-intr";
+        ti,intr-trigger-type = <1>;
+        interrupt-controller;
+        interrupt-parent = <&gic500>;
+        #interrupt-cells = <1>;
+        ti,sci = <&dmsc>;
+        ti,sci-dev-id = <131>;
+        ti,interrupt-ranges = <0 360 32>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index ba3474e1ce6a..28a8eba81d2b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16908,7 +16908,7 @@  F:	Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
 F:	Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
 F:	Documentation/devicetree/bindings/clock/ti,sci-clk.txt
 F:	Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
-F:	Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
+F:	Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
 F:	Documentation/devicetree/bindings/reset/ti,sci-reset.txt
 F:	Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 F:	drivers/clk/keystone/sci-clk.c