diff mbox series

[2/5] fsi: aspeed: Support cabled FSI

Message ID 20200728025527.174503-3-joel@jms.id.au (mailing list archive)
State New, archived
Headers show
Series fsi: Support extra functions on ASPEED master | expand

Commit Message

Joel Stanley July 28, 2020, 2:55 a.m. UTC
Some FSI capable systems have internal FSI signals, and some have
external cabled FSI. Software can detect which machine this is by
reading a jumper GPIO, and also control which pins the signals are
routed to through a mux GPIO.

This attempts to find the GPIOs at probe time. If they are not present
in the device tree the driver will not error and continue as before.

The mux GPIO is owned by the FSI driver to ensure it is not modified at
runtime. The routing jumper obtained as non-exclusive to allow other
software to inspect it's state.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 drivers/fsi/fsi-master-aspeed.c | 46 +++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

Comments

Andrew Jeffery Sept. 3, 2020, 4:49 a.m. UTC | #1
On Tue, 28 Jul 2020, at 12:25, Joel Stanley wrote:
> Some FSI capable systems have internal FSI signals, and some have
> external cabled FSI. Software can detect which machine this is by
> reading a jumper GPIO, and also control which pins the signals are
> routed to through a mux GPIO.
> 
> This attempts to find the GPIOs at probe time. If they are not present
> in the device tree the driver will not error and continue as before.
> 
> The mux GPIO is owned by the FSI driver to ensure it is not modified at
> runtime. The routing jumper obtained as non-exclusive to allow other
> software to inspect it's state.
> 
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
>  drivers/fsi/fsi-master-aspeed.c | 46 +++++++++++++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
> 
> diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
> index 2b8ca72baeb5..c282de76e6e7 100644
> --- a/drivers/fsi/fsi-master-aspeed.c
> +++ b/drivers/fsi/fsi-master-aspeed.c
> @@ -13,6 +13,7 @@
>  #include <linux/regmap.h>
>  #include <linux/slab.h>
>  #include <linux/iopoll.h>
> +#include <linux/gpio/consumer.h>
>  
>  #include "fsi-master.h"
>  
> @@ -417,6 +418,45 @@ static int aspeed_master_init(struct 
> fsi_master_aspeed *aspeed)
>  	return 0;
>  }
>  
> +static int tacoma_cabled_fsi_fixup(struct device *dev)
> +{
> +	struct gpio_desc *routing_gpio, *mux_gpio;
> +	int gpio;
> +
> +	/*
> +	 * The routing GPIO is a jumper indicating we should mux for the
> +	 * externally connected FSI cable.
> +	 */
> +	routing_gpio = devm_gpiod_get_optional(dev, "fsi-routing",
> +			GPIOD_IN | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
> +	if (IS_ERR(routing_gpio))
> +		return PTR_ERR(routing_gpio);
> +	if (!routing_gpio)
> +		return 0;
> +
> +	mux_gpio = devm_gpiod_get_optional(dev, "fsi-mux", GPIOD_ASIS);
> +	if (IS_ERR(mux_gpio))
> +		return PTR_ERR(mux_gpio);
> +	if (!mux_gpio)
> +		return 0;
> +
> +	gpio = gpiod_get_value(routing_gpio);
> +	if (gpio < 0)
> +		return gpio;
> +
> +	/* If the routing GPIO is high we should set the mux to low. */
> +	if (gpio) {
> +		gpiod_direction_output(mux_gpio, 0);
> +		dev_info(dev, "FSI configured for external cable\n");
> +	} else {
> +		gpiod_direction_output(mux_gpio, 1);
> +	}

I haven't checked this logic against the hardware but the rest of the patch 
looks okay.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
diff mbox series

Patch

diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index 2b8ca72baeb5..c282de76e6e7 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -13,6 +13,7 @@ 
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/iopoll.h>
+#include <linux/gpio/consumer.h>
 
 #include "fsi-master.h"
 
@@ -417,6 +418,45 @@  static int aspeed_master_init(struct fsi_master_aspeed *aspeed)
 	return 0;
 }
 
+static int tacoma_cabled_fsi_fixup(struct device *dev)
+{
+	struct gpio_desc *routing_gpio, *mux_gpio;
+	int gpio;
+
+	/*
+	 * The routing GPIO is a jumper indicating we should mux for the
+	 * externally connected FSI cable.
+	 */
+	routing_gpio = devm_gpiod_get_optional(dev, "fsi-routing",
+			GPIOD_IN | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
+	if (IS_ERR(routing_gpio))
+		return PTR_ERR(routing_gpio);
+	if (!routing_gpio)
+		return 0;
+
+	mux_gpio = devm_gpiod_get_optional(dev, "fsi-mux", GPIOD_ASIS);
+	if (IS_ERR(mux_gpio))
+		return PTR_ERR(mux_gpio);
+	if (!mux_gpio)
+		return 0;
+
+	gpio = gpiod_get_value(routing_gpio);
+	if (gpio < 0)
+		return gpio;
+
+	/* If the routing GPIO is high we should set the mux to low. */
+	if (gpio) {
+		gpiod_direction_output(mux_gpio, 0);
+		dev_info(dev, "FSI configured for external cable\n");
+	} else {
+		gpiod_direction_output(mux_gpio, 1);
+	}
+
+	devm_gpiod_put(dev, routing_gpio);
+
+	return 0;
+}
+
 static int fsi_master_aspeed_probe(struct platform_device *pdev)
 {
 	struct fsi_master_aspeed *aspeed;
@@ -424,6 +464,12 @@  static int fsi_master_aspeed_probe(struct platform_device *pdev)
 	int rc, links, reg;
 	__be32 raw;
 
+	rc = tacoma_cabled_fsi_fixup(&pdev->dev);
+	if (rc) {
+		dev_err(&pdev->dev, "Tacoma FSI cable fixup failed\n");
+		return rc;
+	}
+
 	aspeed = devm_kzalloc(&pdev->dev, sizeof(*aspeed), GFP_KERNEL);
 	if (!aspeed)
 		return -ENOMEM;