@@ -7,6 +7,7 @@
*/
/dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
@@ -141,7 +142,7 @@
<1200000>, <1200000>,
<1200000>, <1200000>;
- clocks {
+ s5m8767_osc: clocks {
compatible = "samsung,s5m8767-clk";
#clock-cells = <1>;
clock-output-names = "en32khz_ap",
@@ -522,6 +523,12 @@
};
};
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sd1_bus4 {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
Use the 32 kHz clock from S5M8767 PMIC in the S3C RTC node. Except making the S3C RTC working, this also fixes dtbs_check warnings: arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/exynos5250-spring.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)