diff mbox series

[3/3] ARM: dts: add SD5203 dts

Message ID 20200903122734.2369-4-thunder.leizhen@huawei.com (mailing list archive)
State New, archived
Headers show
Series add support for Hisilicon SD5203 SoC | expand

Commit Message

Leizhen (ThunderTown) Sept. 3, 2020, 12:27 p.m. UTC 
From: Kefeng Wang <wangkefeng.wang@huawei.com>

Add sd5203.dts for Hisilicon SD5203 SoC platform.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 arch/arm/boot/dts/Makefile   |  2 +
 arch/arm/boot/dts/sd5203.dts | 90 ++++++++++++++++++++++++++++++++++++
 2 files changed, 92 insertions(+)
 create mode 100644 arch/arm/boot/dts/sd5203.dts

Comments

Wei Xu Sept. 14, 2020, 9:29 a.m. UTC | #1 
Hi Zhen,

On 2020/9/3 20:27, Zhen Lei wrote:
> From: Kefeng Wang <wangkefeng.wang@huawei.com>
> 
> Add sd5203.dts for Hisilicon SD5203 SoC platform.
> 
> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
>  arch/arm/boot/dts/Makefile   |  2 +
>  arch/arm/boot/dts/sd5203.dts | 90 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 92 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sd5203.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4572db3fa5ae..1d1262df5c55 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -357,6 +357,8 @@ dtb-$(CONFIG_ARCH_MPS2) += \
>  	mps2-an399.dtb
>  dtb-$(CONFIG_ARCH_MOXART) += \
>  	moxart-uc7112lx.dtb
> +dtb-$(CONFIG_ARCH_SD5203) += \
> +	sd5203.dtb
>  dtb-$(CONFIG_SOC_IMX1) += \
>  	imx1-ads.dtb \
>  	imx1-apf9328.dtb
> diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts
> new file mode 100644
> index 000000000000..99da46072f72
> --- /dev/null
> +++ b/arch/arm/boot/dts/sd5203.dts
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2020 Hisilicon Limited.
> + *
> + * DTS file for Hisilicon SD5203 Board
> + */
> +
> +/dts-v1/;
> +
> +/ {
> +	model = "Hisilicon SD5203";
> +	compatible = "hisilicon,sd5203";

Can you please add the binding document as well?

> +	interrupt-parent = <&vic>;
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	chosen {
> +		bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
> +	};
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	cpu {
> +		compatible = "arm,arm926ej-s";
> +		device_type = "cpu";
> +	};
> +
> +	memory@30000000 {
> +		device_type = "memory";
> +		reg = <0x30000000 0x8000000>;
> +	};
> +
> +	soc {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		vic: interrupt-controller@10130000 {
> +			compatible = "hisilicon,sd5203-vic";

Ditto.
Thanks!

Best Regards,
Wei

> +			reg = <0x10130000 0x1000>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +		};
> +
> +		refclk125mhz: refclk125mhz {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <125000000>;
> +		};
> +
> +		timer0: timer@16002000 {
> +			compatible = "arm,sp804", "arm,primecell";
> +			reg = <0x16002000 0x1000>;
> +			interrupts = <4>;
> +			clocks = <&refclk125mhz>;
> +			clock-names = "apb_pclk";
> +		};
> +
> +		timer1: timer@16003000 {
> +			compatible = "arm,sp804", "arm,primecell";
> +			reg = <0x16003000 0x1000>;
> +			interrupts = <5>;
> +			clocks = <&refclk125mhz>;
> +			clock-names = "apb_pclk";
> +		};
> +
> +		uart0: serial@1600D000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x1600D000 0x1000>;
> +			bus_id = "uart0";
> +			clocks = <&refclk125mhz>;
> +			clock-names = "apb_pclk";
> +			reg-shift = <2>;
> +			interrupts = <17>;
> +		};
> +
> +		uart1: serial@1600C000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x1600C000 0x1000>;
> +			clocks = <&refclk125mhz>;
> +			clock-names = "apb_pclk";
> +			reg-shift = <2>;
> +			interrupts = <16>;
> +			status = "disabled";
> +		};
> +	};
> +};
>
Leizhen (ThunderTown) Sept. 14, 2020, 9:55 a.m. UTC | #2 
On 2020/9/14 17:29, Wei Xu wrote:
> Hi Zhen,
> 
> On 2020/9/3 20:27, Zhen Lei wrote:
>> From: Kefeng Wang <wangkefeng.wang@huawei.com>
>>
>> Add sd5203.dts for Hisilicon SD5203 SoC platform.
>>
>> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>>  arch/arm/boot/dts/Makefile   |  2 +
>>  arch/arm/boot/dts/sd5203.dts | 90 ++++++++++++++++++++++++++++++++++++
>>  2 files changed, 92 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/sd5203.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 4572db3fa5ae..1d1262df5c55 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -357,6 +357,8 @@ dtb-$(CONFIG_ARCH_MPS2) += \
>>  	mps2-an399.dtb
>>  dtb-$(CONFIG_ARCH_MOXART) += \
>>  	moxart-uc7112lx.dtb
>> +dtb-$(CONFIG_ARCH_SD5203) += \
>> +	sd5203.dtb
>>  dtb-$(CONFIG_SOC_IMX1) += \
>>  	imx1-ads.dtb \
>>  	imx1-apf9328.dtb
>> diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts
>> new file mode 100644
>> index 000000000000..99da46072f72
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sd5203.dts
>> @@ -0,0 +1,90 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2020 Hisilicon Limited.
>> + *
>> + * DTS file for Hisilicon SD5203 Board
>> + */
>> +
>> +/dts-v1/;
>> +
>> +/ {
>> +	model = "Hisilicon SD5203";
>> +	compatible = "hisilicon,sd5203";
> 
> Can you please add the binding document as well?

OK, I will do it.

> 
>> +	interrupt-parent = <&vic>;
>> +	#address-cells = <1>;
>> +	#size-cells = <1>;
>> +
>> +	chosen {
>> +		bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
>> +	};
>> +
>> +	aliases {
>> +		serial0 = &uart0;
>> +	};
>> +
>> +	cpu {
>> +		compatible = "arm,arm926ej-s";
>> +		device_type = "cpu";
>> +	};
>> +
>> +	memory@30000000 {
>> +		device_type = "memory";
>> +		reg = <0x30000000 0x8000000>;
>> +	};
>> +
>> +	soc {
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		compatible = "simple-bus";
>> +		ranges;
>> +
>> +		vic: interrupt-controller@10130000 {
>> +			compatible = "hisilicon,sd5203-vic";

As Marc Zyngier's suggestion, I discarded adding an independent SD5203-VIC
driver, but make the dw-apb-ictl irqchip driver to support hierarchy irq domain.
I will send V4 of this irqchip driver today.

Here is the link of V3:
https://lkml.org/lkml/2020/9/9/94

> 
> Ditto.
> Thanks!
> 
> Best Regards,
> Wei
> 
>> +			reg = <0x10130000 0x1000>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <1>;
>> +		};
>> +
>> +		refclk125mhz: refclk125mhz {
>> +			compatible = "fixed-clock";
>> +			#clock-cells = <0>;
>> +			clock-frequency = <125000000>;
>> +		};
>> +
>> +		timer0: timer@16002000 {
>> +			compatible = "arm,sp804", "arm,primecell";
>> +			reg = <0x16002000 0x1000>;
>> +			interrupts = <4>;
>> +			clocks = <&refclk125mhz>;
>> +			clock-names = "apb_pclk";
>> +		};
>> +
>> +		timer1: timer@16003000 {
>> +			compatible = "arm,sp804", "arm,primecell";
>> +			reg = <0x16003000 0x1000>;
>> +			interrupts = <5>;
>> +			clocks = <&refclk125mhz>;
>> +			clock-names = "apb_pclk";
>> +		};
>> +
>> +		uart0: serial@1600D000 {
>> +			compatible = "snps,dw-apb-uart";
>> +			reg = <0x1600D000 0x1000>;
>> +			bus_id = "uart0";
>> +			clocks = <&refclk125mhz>;
>> +			clock-names = "apb_pclk";
>> +			reg-shift = <2>;
>> +			interrupts = <17>;
>> +		};
>> +
>> +		uart1: serial@1600C000 {
>> +			compatible = "snps,dw-apb-uart";
>> +			reg = <0x1600C000 0x1000>;
>> +			clocks = <&refclk125mhz>;
>> +			clock-names = "apb_pclk";
>> +			reg-shift = <2>;
>> +			interrupts = <16>;
>> +			status = "disabled";
>> +		};
>> +	};
>> +};
>>
> 
> .
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3fa5ae..1d1262df5c55 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -357,6 +357,8 @@  dtb-$(CONFIG_ARCH_MPS2) += \
 	mps2-an399.dtb
 dtb-$(CONFIG_ARCH_MOXART) += \
 	moxart-uc7112lx.dtb
+dtb-$(CONFIG_ARCH_SD5203) += \
+	sd5203.dtb
 dtb-$(CONFIG_SOC_IMX1) += \
 	imx1-ads.dtb \
 	imx1-apf9328.dtb
diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts
new file mode 100644
index 000000000000..99da46072f72
--- /dev/null
+++ b/arch/arm/boot/dts/sd5203.dts
@@ -0,0 +1,90 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Hisilicon Limited.
+ *
+ * DTS file for Hisilicon SD5203 Board
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Hisilicon SD5203";
+	compatible = "hisilicon,sd5203";
+	interrupt-parent = <&vic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpu {
+		compatible = "arm,arm926ej-s";
+		device_type = "cpu";
+	};
+
+	memory@30000000 {
+		device_type = "memory";
+		reg = <0x30000000 0x8000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		vic: interrupt-controller@10130000 {
+			compatible = "hisilicon,sd5203-vic";
+			reg = <0x10130000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		refclk125mhz: refclk125mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		timer0: timer@16002000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x16002000 0x1000>;
+			interrupts = <4>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		timer1: timer@16003000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x16003000 0x1000>;
+			interrupts = <5>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: serial@1600D000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1600D000 0x1000>;
+			bus_id = "uart0";
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+			reg-shift = <2>;
+			interrupts = <17>;
+		};
+
+		uart1: serial@1600C000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1600C000 0x1000>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+			reg-shift = <2>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+	};
+};