diff mbox series

crypto: stm32/crc32 - Avoid lock if hardware is already used

Message ID 20200904112527.15677-1-nicolas.toromanoff@st.com
State New, archived
Headers show
Series crypto: stm32/crc32 - Avoid lock if hardware is already used | expand

Commit Message

Nicolas Toromanoff Sept. 4, 2020, 11:25 a.m. UTC
If STM32 CRC device is already in use, calculate CRC by software.

This will release CPU constraint for a concurrent access to the
hardware, and avoid masking irqs during the whole block processing.

Fixes: 7795c0baf5ac ("crypto: stm32/crc32 - protect from concurrent accesses")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
---
 drivers/crypto/stm32/Kconfig       |  2 ++
 drivers/crypto/stm32/stm32-crc32.c | 15 ++++++++++++---
 2 files changed, 14 insertions(+), 3 deletions(-)

Comments

Herbert Xu Sept. 11, 2020, 4:28 a.m. UTC | #1
On Fri, Sep 04, 2020 at 01:25:27PM +0200, Nicolas Toromanoff wrote:
> If STM32 CRC device is already in use, calculate CRC by software.
> 
> This will release CPU constraint for a concurrent access to the
> hardware, and avoid masking irqs during the whole block processing.
> 
> Fixes: 7795c0baf5ac ("crypto: stm32/crc32 - protect from concurrent accesses")
> 
> Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
> ---
>  drivers/crypto/stm32/Kconfig       |  2 ++
>  drivers/crypto/stm32/stm32-crc32.c | 15 ++++++++++++---
>  2 files changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/crypto/stm32/Kconfig b/drivers/crypto/stm32/Kconfig
> index 4ef3eb11361c..8d605b07571f 100644
> --- a/drivers/crypto/stm32/Kconfig
> +++ b/drivers/crypto/stm32/Kconfig
> @@ -3,6 +3,8 @@ config CRYPTO_DEV_STM32_CRC
>  	tristate "Support for STM32 crc accelerators"
>  	depends on ARCH_STM32
>  	select CRYPTO_HASH
> +	select CRYPTO_CRC32
> +	select CRYPTO_CRC32C

Shouldn't this be "select CRC32"?

Thanks,
Nicolas Toromanoff Sept. 15, 2020, 3:54 p.m. UTC | #2
Hello Herbert,

On 9/11/20 6:28 AM, Herbert Xu wrote:
> On Fri, Sep 04, 2020 at 01:25:27PM +0200, Nicolas Toromanoff wrote:
>> If STM32 CRC device is already in use, calculate CRC by software.
>>
>> This will release CPU constraint for a concurrent access to the
>> hardware, and avoid masking irqs during the whole block processing.
>>
>> Fixes: 7795c0baf5ac ("crypto: stm32/crc32 - protect from concurrent accesses")
>>
>> Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
>> ---
>>   drivers/crypto/stm32/Kconfig       |  2 ++
>>   drivers/crypto/stm32/stm32-crc32.c | 15 ++++++++++++---
>>   2 files changed, 14 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/crypto/stm32/Kconfig b/drivers/crypto/stm32/Kconfig
>> index 4ef3eb11361c..8d605b07571f 100644
>> --- a/drivers/crypto/stm32/Kconfig
>> +++ b/drivers/crypto/stm32/Kconfig
>> @@ -3,6 +3,8 @@ config CRYPTO_DEV_STM32_CRC
>>   	tristate "Support for STM32 crc accelerators"
>>   	depends on ARCH_STM32
>>   	select CRYPTO_HASH
>> +	select CRYPTO_CRC32
>> +	select CRYPTO_CRC32C
> 
> Shouldn't this be "select CRC32"?

Correct "select CRC32" is enough.
I'll send a version 2 with only "select CRC32".


Nicolas.
diff mbox series

Patch

diff --git a/drivers/crypto/stm32/Kconfig b/drivers/crypto/stm32/Kconfig
index 4ef3eb11361c..8d605b07571f 100644
--- a/drivers/crypto/stm32/Kconfig
+++ b/drivers/crypto/stm32/Kconfig
@@ -3,6 +3,8 @@  config CRYPTO_DEV_STM32_CRC
 	tristate "Support for STM32 crc accelerators"
 	depends on ARCH_STM32
 	select CRYPTO_HASH
+	select CRYPTO_CRC32
+	select CRYPTO_CRC32C
 	help
 	  This enables support for the CRC32 hw accelerator which can be found
 	  on STMicroelectronics STM32 SOC.
diff --git a/drivers/crypto/stm32/stm32-crc32.c b/drivers/crypto/stm32/stm32-crc32.c
index 783a64f3f635..75867c0b0017 100644
--- a/drivers/crypto/stm32/stm32-crc32.c
+++ b/drivers/crypto/stm32/stm32-crc32.c
@@ -6,6 +6,7 @@ 
 
 #include <linux/bitrev.h>
 #include <linux/clk.h>
+#include <linux/crc32.h>
 #include <linux/crc32poly.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -149,7 +150,6 @@  static int burst_update(struct shash_desc *desc, const u8 *d8,
 	struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc);
 	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
 	struct stm32_crc *crc;
-	unsigned long flags;
 
 	crc = stm32_crc_get_next_crc();
 	if (!crc)
@@ -157,7 +157,15 @@  static int burst_update(struct shash_desc *desc, const u8 *d8,
 
 	pm_runtime_get_sync(crc->dev);
 
-	spin_lock_irqsave(&crc->lock, flags);
+	if (!spin_trylock(&crc->lock)) {
+		/* Hardware is busy, calculate crc32 by software */
+		if (mctx->poly == CRC32_POLY_LE)
+			ctx->partial = crc32_le(ctx->partial, d8, length);
+		else
+			ctx->partial = __crc32c_le(ctx->partial, d8, length);
+
+		goto pm_out;
+	}
 
 	/*
 	 * Restore previously calculated CRC for this context as init value
@@ -197,8 +205,9 @@  static int burst_update(struct shash_desc *desc, const u8 *d8,
 	/* Store partial result */
 	ctx->partial = readl_relaxed(crc->regs + CRC_DR);
 
-	spin_unlock_irqrestore(&crc->lock, flags);
+	spin_unlock(&crc->lock);
 
+pm_out:
 	pm_runtime_mark_last_busy(crc->dev);
 	pm_runtime_put_autosuspend(crc->dev);