diff mbox series

[v2,1/3] pinctrl: mvebu: Fix i2c sda definition for 98DX3236

Message ID 20200907211712.9697-2-chris.packham@alliedtelesis.co.nz (mailing list archive)
State New, archived
Headers show
Series 98dx3236 i2c related fixes | expand

Commit Message

Chris Packham Sept. 7, 2020, 9:17 p.m. UTC
Per the datasheet the i2c functions use MPP_Sel=0x1. They are documented
as using MPP_Sel=0x4 as well but mixing 0x1 and 0x4 is clearly wrong. On
the board tested 0x4 resulted in a non-functioning i2c bus so stick with
0x1 which works.

Fixes: d7ae8f8dee7f ("pinctrl: mvebu: pinctrl driver for 98DX3236 SoC")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---

Changes in v2:
- Add reviewed-by from Andrew

 drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Linus Walleij Sept. 12, 2020, 4:15 p.m. UTC | #1
On Mon, Sep 7, 2020 at 11:17 PM Chris Packham
<chris.packham@alliedtelesis.co.nz> wrote:

> Per the datasheet the i2c functions use MPP_Sel=0x1. They are documented
> as using MPP_Sel=0x4 as well but mixing 0x1 and 0x4 is clearly wrong. On
> the board tested 0x4 resulted in a non-functioning i2c bus so stick with
> 0x1 which works.
>
> Fixes: d7ae8f8dee7f ("pinctrl: mvebu: pinctrl driver for 98DX3236 SoC")
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

This patch 1/3 applied for pin control fixes.

Patches 2 & 3 should go via the SoC tree.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
index a767a05fa3a0..48e2a6c56a83 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
@@ -414,7 +414,7 @@  static struct mvebu_mpp_mode mv98dx3236_mpp_modes[] = {
 		 MPP_VAR_FUNCTION(0x1, "i2c0", "sck",        V_98DX3236_PLUS)),
 	MPP_MODE(15,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,         V_98DX3236_PLUS),
-		 MPP_VAR_FUNCTION(0x4, "i2c0", "sda",        V_98DX3236_PLUS)),
+		 MPP_VAR_FUNCTION(0x1, "i2c0", "sda",        V_98DX3236_PLUS)),
 	MPP_MODE(16,
 		 MPP_VAR_FUNCTION(0x0, "gpo", NULL,          V_98DX3236_PLUS),
 		 MPP_VAR_FUNCTION(0x4, "dev", "oe",          V_98DX3236_PLUS)),