diff mbox series

[v5,1/4] dt-bindings: pci: mediatek: Modified the Device tree bindings

Message ID 20200910061115.909-2-chuanjia.liu@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Spilt PCIe node to comply with hardware design | expand

Commit Message

Chuanjia Liu Sept. 10, 2020, 6:11 a.m. UTC
Split the PCIe node and add pciecfg node to fix MSI issue.

Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
---
 .../bindings/pci/mediatek-pcie-cfg.yaml       |  38 +++++
 .../devicetree/bindings/pci/mediatek-pcie.txt | 144 +++++++++++-------
 2 files changed, 129 insertions(+), 53 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml

Comments

Rob Herring (Arm) Sept. 11, 2020, 10:47 p.m. UTC | #1
On Thu, 10 Sep 2020 14:11:12 +0800, Chuanjia Liu wrote:
> Split the PCIe node and add pciecfg node to fix MSI issue.
> 
> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
> Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
> ---
>  .../bindings/pci/mediatek-pcie-cfg.yaml       |  38 +++++
>  .../devicetree/bindings/pci/mediatek-pcie.txt | 144 +++++++++++-------
>  2 files changed, 129 insertions(+), 53 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.example.dt.yaml: example-0: pciecfg@1a140000:reg:0: [0, 437518336, 0, 4096] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml


See https://patchwork.ozlabs.org/patch/1361249

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.
Rob Herring (Arm) Sept. 11, 2020, 10:50 p.m. UTC | #2
On Thu, Sep 10, 2020 at 02:11:12PM +0800, Chuanjia Liu wrote:
> Split the PCIe node and add pciecfg node to fix MSI issue.
> 
> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
> Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
> ---
>  .../bindings/pci/mediatek-pcie-cfg.yaml       |  38 +++++
>  .../devicetree/bindings/pci/mediatek-pcie.txt | 144 +++++++++++-------
>  2 files changed, 129 insertions(+), 53 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
> new file mode 100644
> index 000000000000..4d2835ab4858
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
> @@ -0,0 +1,38 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek PCIECFG controller
> +
> +maintainers:
> +  - Chuanjia Liu <chuanjia.liu@mediatek.com>
> +  - Jianjun Wang <jianjun.wang@mediatek.com>
> +
> +description: |
> +  The MediaTek PCIECFG controller controls some feature about
> +  LTSSM, ASPM and so on.
> +
> +properties:
> +  compatible:
> +      items:
> +        - enum:
> +            - mediatek,mt7622-pciecfg
> +            - mediatek,mt7629-pciecfg
> +        - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    pciecfg: pciecfg@1a140000 {
> +        compatible = "mediatek,mt7622-pciecfg", "syscon";
> +        reg = <0 0x1a140000 0 0x1000>;
> +    };
> +...
> diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
> index 7468d666763a..31e261933685 100644
> --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
> @@ -8,7 +8,7 @@ Required properties:
>  	"mediatek,mt7623-pcie"
>  	"mediatek,mt7629-pcie"
>  - device_type: Must be "pci"
> -- reg: Base addresses and lengths of the PCIe subsys and root ports.
> +- reg: Base addresses and lengths of the root ports.
>  - reg-names: Names of the above areas to use during resource lookup.
>  - #address-cells: Address representation for root ports (must be 3)
>  - #size-cells: Size representation for root ports (must be 2)
> @@ -19,10 +19,10 @@ Required properties:
>     - sys_ckN :transaction layer and data link layer clock
>    Required entries for MT2701/MT7623:
>     - free_ck :for reference clock of PCIe subsys
> -  Required entries for MT2712/MT7622:
> +  Required entries for MT2712/MT7622/MT7629:
>     - ahb_ckN :AHB slave interface operating clock for CSR access and RC
>  	      initiated MMIO access
> -  Required entries for MT7622:
> +  Required entries for MT7622/MT7629:
>     - axi_ckN :application layer MMIO channel operating clock
>     - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when
>  	      pcie_mac_ck/pcie_pipe_ck is turned off
> @@ -47,10 +47,13 @@ Required properties for MT7623/MT2701:
>  - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
>    number of root ports.
>  
> -Required properties for MT2712/MT7622:
> +Required properties for MT2712/MT7622/MT7629:
>  -interrupts: A list of interrupt outputs of the controller, must have one
>  	     entry for each PCIe port
>  
> +Required properties for MT7622/MT7629:
> +- mediatek,pcie-subsys: Should be a phandle of the pciecfg node.
> +

You don't need this. You can search for the node by compatible.

Plus it doesn't match the example.

>  In addition, the device tree node must have sub-nodes describing each
>  PCIe port interface, having the following mandatory properties:
>  
> @@ -143,56 +146,73 @@ Examples for MT7623:
>  
>  Examples for MT2712:
>  
> -	pcie: pcie@11700000 {
> +	pcie1: pcie@112ff000 {
>  		compatible = "mediatek,mt2712-pcie";
>  		device_type = "pci";
> -		reg = <0 0x11700000 0 0x1000>,
> -		      <0 0x112ff000 0 0x1000>;
> -		reg-names = "port0", "port1";
> +		reg = <0 0x112ff000 0 0x1000>;
> +		reg-names = "port1";
>  		#address-cells = <3>;
>  		#size-cells = <2>;
> -		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> -			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> -		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
> -			 <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
> -			 <&pericfg CLK_PERI_PCIE0>,
> +		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "pcie_irq";
> +		clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
>  			 <&pericfg CLK_PERI_PCIE1>;
> -		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
> -		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
> -		phy-names = "pcie-phy0", "pcie-phy1";
> +		clock-names = "sys_ck1", "ahb_ck1";
> +		phys = <&u3port1 PHY_TYPE_PCIE>;
> +		phy-names = "pcie-phy1";
>  		bus-range = <0x00 0xff>;
> -		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
> +		ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
> +		status = "disabled";
>  
> -		pcie0: pcie@0,0 {
> -			reg = <0x0000 0 0 0 0>;
> +		slot1: pcie@1,0 {
> +			reg = <0x0800 0 0 0 0>;
>  			#address-cells = <3>;
>  			#size-cells = <2>;
>  			#interrupt-cells = <1>;
>  			ranges;
>  			interrupt-map-mask = <0 0 0 7>;
> -			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
> -					<0 0 0 2 &pcie_intc0 1>,
> -					<0 0 0 3 &pcie_intc0 2>,
> -					<0 0 0 4 &pcie_intc0 3>;
> -			pcie_intc0: interrupt-controller {
> +			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
> +					<0 0 0 2 &pcie_intc1 1>,
> +					<0 0 0 3 &pcie_intc1 2>,
> +					<0 0 0 4 &pcie_intc1 3>;
> +			pcie_intc1: interrupt-controller {
>  				interrupt-controller;
>  				#address-cells = <0>;
>  				#interrupt-cells = <1>;
>  			};
>  		};
> +	};
>  
> -		pcie1: pcie@1,0 {
> -			reg = <0x0800 0 0 0 0>;
> +	pcie0: pcie@11700000 {
> +		compatible = "mediatek,mt2712-pcie";
> +		device_type = "pci";
> +		reg = <0 0x11700000 0 0x1000>;
> +		reg-names = "port0";
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "pcie_irq";
> +		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
> +			 <&pericfg CLK_PERI_PCIE0>;
> +		clock-names = "sys_ck0", "ahb_ck0";
> +		phys = <&u3port0 PHY_TYPE_PCIE>;
> +		phy-names = "pcie-phy0";
> +		bus-range = <0x00 0xff>;
> +		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
> +		status = "disabled";
> +
> +		slot0: pcie@0,0 {
> +			reg = <0x0000 0 0 0 0>;
>  			#address-cells = <3>;
>  			#size-cells = <2>;
>  			#interrupt-cells = <1>;
>  			ranges;
>  			interrupt-map-mask = <0 0 0 7>;
> -			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
> -					<0 0 0 2 &pcie_intc1 1>,
> -					<0 0 0 3 &pcie_intc1 2>,
> -					<0 0 0 4 &pcie_intc1 3>;
> -			pcie_intc1: interrupt-controller {
> +			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
> +					<0 0 0 2 &pcie_intc0 1>,
> +					<0 0 0 3 &pcie_intc0 2>,
> +					<0 0 0 4 &pcie_intc0 3>;
> +			pcie_intc0: interrupt-controller {
>  				interrupt-controller;
>  				#address-cells = <0>;
>  				#interrupt-cells = <1>;
> @@ -202,39 +222,31 @@ Examples for MT2712:
>  
>  Examples for MT7622:
>  
> -	pcie: pcie@1a140000 {
> +	pcie0: pcie@1a143000 {
>  		compatible = "mediatek,mt7622-pcie";
>  		device_type = "pci";
> -		reg = <0 0x1a140000 0 0x1000>,
> -		      <0 0x1a143000 0 0x1000>,
> -		      <0 0x1a145000 0 0x1000>;
> -		reg-names = "subsys", "port0", "port1";
> +		reg = <0 0x1a143000 0 0x1000>;
> +		reg-names = "port0";
> +		mediatek,pcie-cfg = <&pciecfg>;
>  		#address-cells = <3>;
>  		#size-cells = <2>;
> -		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
> -			     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
> +		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-names = "pcie_irq";
>  		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
> -			 <&pciesys CLK_PCIE_P1_MAC_EN>,
>  			 <&pciesys CLK_PCIE_P0_AHB_EN>,
> -			 <&pciesys CLK_PCIE_P1_AHB_EN>,
>  			 <&pciesys CLK_PCIE_P0_AUX_EN>,
> -			 <&pciesys CLK_PCIE_P1_AUX_EN>,
>  			 <&pciesys CLK_PCIE_P0_AXI_EN>,
> -			 <&pciesys CLK_PCIE_P1_AXI_EN>,
>  			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
> -			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
> -			 <&pciesys CLK_PCIE_P0_PIPE_EN>,
> -			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
> -		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
> -			      "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
> -			      "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
> -		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
> -		phy-names = "pcie-phy0", "pcie-phy1";
> +			 <&pciesys CLK_PCIE_P0_PIPE_EN>;
> +		clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
> +			      "axi_ck0", "obff_ck0", "pipe_ck0";
> +
>  		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
>  		bus-range = <0x00 0xff>;
> -		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
> +		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x8000000>;
> +		status = "disabled";
>  
> -		pcie0: pcie@0,0 {
> +		slot0: pcie@0,0 {
>  			reg = <0x0000 0 0 0 0>;
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> @@ -251,8 +263,34 @@ Examples for MT7622:
>  				#interrupt-cells = <1>;
>  			};
>  		};
> +	};
> +
> +	pcie1: pcie@1a145000 {
> +		compatible = "mediatek,mt7622-pcie";
> +		device_type = "pci";
> +		reg = <0 0x1a145000 0 0x1000>;
> +		reg-names = "port1";
> +		mediatek,pcie-cfg = <&pciecfg>;
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-names = "pcie_irq";
> +		clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
> +			 /* designer has connect RC1 with p0_ahb clock */
> +			 <&pciesys CLK_PCIE_P0_AHB_EN>,
> +			 <&pciesys CLK_PCIE_P1_AUX_EN>,
> +			 <&pciesys CLK_PCIE_P1_AXI_EN>,
> +			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
> +			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
> +		clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
> +			      "axi_ck1", "obff_ck1", "pipe_ck1";
> +
> +		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
> +		bus-range = <0x00 0xff>;
> +		ranges = <0x82000000 0 0x28000000  0x0 0x28000000  0 0x8000000>;
> +		status = "disabled";
>  
> -		pcie1: pcie@1,0 {
> +		slot1: pcie@1,0 {
>  			reg = <0x0800 0 0 0 0>;
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> -- 
> 2.18.0
Chuanjia Liu Sept. 13, 2020, 2:50 a.m. UTC | #3
On Fri, 2020-09-11 at 16:47 -0600, Rob Herring wrote:
> On Thu, 10 Sep 2020 14:11:12 +0800, Chuanjia Liu wrote:
> > Split the PCIe node and add pciecfg node to fix MSI issue.
> > 
> > Acked-by: Ryder Lee <ryder.lee@mediatek.com>
> > Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
> > ---
> >  .../bindings/pci/mediatek-pcie-cfg.yaml       |  38 +++++
> >  .../devicetree/bindings/pci/mediatek-pcie.txt | 144 +++++++++++-------
> >  2 files changed, 129 insertions(+), 53 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
> > 
> 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.example.dt.yaml: example-0: pciecfg@1a140000:reg:0: [0, 437518336, 0, 4096] is too long
> 	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
> 
> 
> See https://patchwork.ozlabs.org/patch/1361249
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
> 
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
> 
> Please check and re-submit.
> 
Thanks for your review, I will update my dt-schema and fix it in next
version.

regards,
Chuanjia
Chuanjia Liu Sept. 13, 2020, 2:54 a.m. UTC | #4
On Fri, 2020-09-11 at 16:50 -0600, Rob Herring wrote:
> On Thu, Sep 10, 2020 at 02:11:12PM +0800, Chuanjia Liu wrote:
> > Split the PCIe node and add pciecfg node to fix MSI issue.
> > 
> > Acked-by: Ryder Lee <ryder.lee@mediatek.com>
> > Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
> > ---
> >  .../bindings/pci/mediatek-pcie-cfg.yaml       |  38 +++++
> >  .../devicetree/bindings/pci/mediatek-pcie.txt | 144 +++++++++++-------
> >  2 files changed, 129 insertions(+), 53 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
> > new file mode 100644
> > index 000000000000..4d2835ab4858
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
> > @@ -0,0 +1,38 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Mediatek PCIECFG controller
> > +
> > +maintainers:
> > +  - Chuanjia Liu <chuanjia.liu@mediatek.com>
> > +  - Jianjun Wang <jianjun.wang@mediatek.com>
> > +
> > +description: |
> > +  The MediaTek PCIECFG controller controls some feature about
> > +  LTSSM, ASPM and so on.
> > +
> > +properties:
> > +  compatible:
> > +      items:
> > +        - enum:
> > +            - mediatek,mt7622-pciecfg
> > +            - mediatek,mt7629-pciecfg
> > +        - const: syscon
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +examples:
> > +  - |
> > +    pciecfg: pciecfg@1a140000 {
> > +        compatible = "mediatek,mt7622-pciecfg", "syscon";
> > +        reg = <0 0x1a140000 0 0x1000>;
> > +    };
> > +...
> > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
> > index 7468d666763a..31e261933685 100644
> > --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
> > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
> > @@ -8,7 +8,7 @@ Required properties:
> >  	"mediatek,mt7623-pcie"
> >  	"mediatek,mt7629-pcie"
> >  - device_type: Must be "pci"
> > -- reg: Base addresses and lengths of the PCIe subsys and root ports.
> > +- reg: Base addresses and lengths of the root ports.
> >  - reg-names: Names of the above areas to use during resource lookup.
> >  - #address-cells: Address representation for root ports (must be 3)
> >  - #size-cells: Size representation for root ports (must be 2)
> > @@ -19,10 +19,10 @@ Required properties:
> >     - sys_ckN :transaction layer and data link layer clock
> >    Required entries for MT2701/MT7623:
> >     - free_ck :for reference clock of PCIe subsys
> > -  Required entries for MT2712/MT7622:
> > +  Required entries for MT2712/MT7622/MT7629:
> >     - ahb_ckN :AHB slave interface operating clock for CSR access and RC
> >  	      initiated MMIO access
> > -  Required entries for MT7622:
> > +  Required entries for MT7622/MT7629:
> >     - axi_ckN :application layer MMIO channel operating clock
> >     - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when
> >  	      pcie_mac_ck/pcie_pipe_ck is turned off
> > @@ -47,10 +47,13 @@ Required properties for MT7623/MT2701:
> >  - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
> >    number of root ports.
> >  
> > -Required properties for MT2712/MT7622:
> > +Required properties for MT2712/MT7622/MT7629:
> >  -interrupts: A list of interrupt outputs of the controller, must have one
> >  	     entry for each PCIe port
> >  
> > +Required properties for MT7622/MT7629:
> > +- mediatek,pcie-subsys: Should be a phandle of the pciecfg node.
> > +
> 
> You don't need this. You can search for the node by compatible.
> 
> Plus it doesn't match the example.

Thanks for you comment, I will change it in the next version.

regards,
Chuanjia
> 
> >  In addition, the device tree node must have sub-nodes describing each
> >  PCIe port interface, having the following mandatory properties:
> >  
> > @@ -143,56 +146,73 @@ Examples for MT7623:
> >  
> >  Examples for MT2712:
> >  
> > -	pcie: pcie@11700000 {
> > +	pcie1: pcie@112ff000 {
> >  		compatible = "mediatek,mt2712-pcie";
> >  		device_type = "pci";
> > -		reg = <0 0x11700000 0 0x1000>,
> > -		      <0 0x112ff000 0 0x1000>;
> > -		reg-names = "port0", "port1";
> > +		reg = <0 0x112ff000 0 0x1000>;
> > +		reg-names = "port1";
> >  		#address-cells = <3>;
> >  		#size-cells = <2>;
> > -		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> > -			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> > -		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
> > -			 <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
> > -			 <&pericfg CLK_PERI_PCIE0>,
> > +		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> > +		interrupt-names = "pcie_irq";
> > +		clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
> >  			 <&pericfg CLK_PERI_PCIE1>;
> > -		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
> > -		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
> > -		phy-names = "pcie-phy0", "pcie-phy1";
> > +		clock-names = "sys_ck1", "ahb_ck1";
> > +		phys = <&u3port1 PHY_TYPE_PCIE>;
> > +		phy-names = "pcie-phy1";
> >  		bus-range = <0x00 0xff>;
> > -		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
> > +		ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
> > +		status = "disabled";
> >  
> > -		pcie0: pcie@0,0 {
> > -			reg = <0x0000 0 0 0 0>;
> > +		slot1: pcie@1,0 {
> > +			reg = <0x0800 0 0 0 0>;
> >  			#address-cells = <3>;
> >  			#size-cells = <2>;
> >  			#interrupt-cells = <1>;
> >  			ranges;
> >  			interrupt-map-mask = <0 0 0 7>;
> > -			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
> > -					<0 0 0 2 &pcie_intc0 1>,
> > -					<0 0 0 3 &pcie_intc0 2>,
> > -					<0 0 0 4 &pcie_intc0 3>;
> > -			pcie_intc0: interrupt-controller {
> > +			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
> > +					<0 0 0 2 &pcie_intc1 1>,
> > +					<0 0 0 3 &pcie_intc1 2>,
> > +					<0 0 0 4 &pcie_intc1 3>;
> > +			pcie_intc1: interrupt-controller {
> >  				interrupt-controller;
> >  				#address-cells = <0>;
> >  				#interrupt-cells = <1>;
> >  			};
> >  		};
> > +	};
> >  
> > -		pcie1: pcie@1,0 {
> > -			reg = <0x0800 0 0 0 0>;
> > +	pcie0: pcie@11700000 {
> > +		compatible = "mediatek,mt2712-pcie";
> > +		device_type = "pci";
> > +		reg = <0 0x11700000 0 0x1000>;
> > +		reg-names = "port0";
> > +		#address-cells = <3>;
> > +		#size-cells = <2>;
> > +		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> > +		interrupt-names = "pcie_irq";
> > +		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
> > +			 <&pericfg CLK_PERI_PCIE0>;
> > +		clock-names = "sys_ck0", "ahb_ck0";
> > +		phys = <&u3port0 PHY_TYPE_PCIE>;
> > +		phy-names = "pcie-phy0";
> > +		bus-range = <0x00 0xff>;
> > +		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
> > +		status = "disabled";
> > +
> > +		slot0: pcie@0,0 {
> > +			reg = <0x0000 0 0 0 0>;
> >  			#address-cells = <3>;
> >  			#size-cells = <2>;
> >  			#interrupt-cells = <1>;
> >  			ranges;
> >  			interrupt-map-mask = <0 0 0 7>;
> > -			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
> > -					<0 0 0 2 &pcie_intc1 1>,
> > -					<0 0 0 3 &pcie_intc1 2>,
> > -					<0 0 0 4 &pcie_intc1 3>;
> > -			pcie_intc1: interrupt-controller {
> > +			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
> > +					<0 0 0 2 &pcie_intc0 1>,
> > +					<0 0 0 3 &pcie_intc0 2>,
> > +					<0 0 0 4 &pcie_intc0 3>;
> > +			pcie_intc0: interrupt-controller {
> >  				interrupt-controller;
> >  				#address-cells = <0>;
> >  				#interrupt-cells = <1>;
> > @@ -202,39 +222,31 @@ Examples for MT2712:
> >  
> >  Examples for MT7622:
> >  
> > -	pcie: pcie@1a140000 {
> > +	pcie0: pcie@1a143000 {
> >  		compatible = "mediatek,mt7622-pcie";
> >  		device_type = "pci";
> > -		reg = <0 0x1a140000 0 0x1000>,
> > -		      <0 0x1a143000 0 0x1000>,
> > -		      <0 0x1a145000 0 0x1000>;
> > -		reg-names = "subsys", "port0", "port1";
> > +		reg = <0 0x1a143000 0 0x1000>;
> > +		reg-names = "port0";
> > +		mediatek,pcie-cfg = <&pciecfg>;
> >  		#address-cells = <3>;
> >  		#size-cells = <2>;
> > -		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
> > -			     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
> > +		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
> > +		interrupt-names = "pcie_irq";
> >  		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
> > -			 <&pciesys CLK_PCIE_P1_MAC_EN>,
> >  			 <&pciesys CLK_PCIE_P0_AHB_EN>,
> > -			 <&pciesys CLK_PCIE_P1_AHB_EN>,
> >  			 <&pciesys CLK_PCIE_P0_AUX_EN>,
> > -			 <&pciesys CLK_PCIE_P1_AUX_EN>,
> >  			 <&pciesys CLK_PCIE_P0_AXI_EN>,
> > -			 <&pciesys CLK_PCIE_P1_AXI_EN>,
> >  			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
> > -			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
> > -			 <&pciesys CLK_PCIE_P0_PIPE_EN>,
> > -			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
> > -		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
> > -			      "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
> > -			      "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
> > -		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
> > -		phy-names = "pcie-phy0", "pcie-phy1";
> > +			 <&pciesys CLK_PCIE_P0_PIPE_EN>;
> > +		clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
> > +			      "axi_ck0", "obff_ck0", "pipe_ck0";
> > +
> >  		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
> >  		bus-range = <0x00 0xff>;
> > -		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
> > +		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x8000000>;
> > +		status = "disabled";
> >  
> > -		pcie0: pcie@0,0 {
> > +		slot0: pcie@0,0 {
> >  			reg = <0x0000 0 0 0 0>;
> >  			#address-cells = <3>;
> >  			#size-cells = <2>;
> > @@ -251,8 +263,34 @@ Examples for MT7622:
> >  				#interrupt-cells = <1>;
> >  			};
> >  		};
> > +	};
> > +
> > +	pcie1: pcie@1a145000 {
> > +		compatible = "mediatek,mt7622-pcie";
> > +		device_type = "pci";
> > +		reg = <0 0x1a145000 0 0x1000>;
> > +		reg-names = "port1";
> > +		mediatek,pcie-cfg = <&pciecfg>;
> > +		#address-cells = <3>;
> > +		#size-cells = <2>;
> > +		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
> > +		interrupt-names = "pcie_irq";
> > +		clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
> > +			 /* designer has connect RC1 with p0_ahb clock */
> > +			 <&pciesys CLK_PCIE_P0_AHB_EN>,
> > +			 <&pciesys CLK_PCIE_P1_AUX_EN>,
> > +			 <&pciesys CLK_PCIE_P1_AXI_EN>,
> > +			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
> > +			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
> > +		clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
> > +			      "axi_ck1", "obff_ck1", "pipe_ck1";
> > +
> > +		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
> > +		bus-range = <0x00 0xff>;
> > +		ranges = <0x82000000 0 0x28000000  0x0 0x28000000  0 0x8000000>;
> > +		status = "disabled";
> >  
> > -		pcie1: pcie@1,0 {
> > +		slot1: pcie@1,0 {
> >  			reg = <0x0800 0 0 0 0>;
> >  			#address-cells = <3>;
> >  			#size-cells = <2>;
> > -- 
> > 2.18.0
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
new file mode 100644
index 000000000000..4d2835ab4858
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
@@ -0,0 +1,38 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek PCIECFG controller
+
+maintainers:
+  - Chuanjia Liu <chuanjia.liu@mediatek.com>
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |
+  The MediaTek PCIECFG controller controls some feature about
+  LTSSM, ASPM and so on.
+
+properties:
+  compatible:
+      items:
+        - enum:
+            - mediatek,mt7622-pciecfg
+            - mediatek,mt7629-pciecfg
+        - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    pciecfg: pciecfg@1a140000 {
+        compatible = "mediatek,mt7622-pciecfg", "syscon";
+        reg = <0 0x1a140000 0 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 7468d666763a..31e261933685 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -8,7 +8,7 @@  Required properties:
 	"mediatek,mt7623-pcie"
 	"mediatek,mt7629-pcie"
 - device_type: Must be "pci"
-- reg: Base addresses and lengths of the PCIe subsys and root ports.
+- reg: Base addresses and lengths of the root ports.
 - reg-names: Names of the above areas to use during resource lookup.
 - #address-cells: Address representation for root ports (must be 3)
 - #size-cells: Size representation for root ports (must be 2)
@@ -19,10 +19,10 @@  Required properties:
    - sys_ckN :transaction layer and data link layer clock
   Required entries for MT2701/MT7623:
    - free_ck :for reference clock of PCIe subsys
-  Required entries for MT2712/MT7622:
+  Required entries for MT2712/MT7622/MT7629:
    - ahb_ckN :AHB slave interface operating clock for CSR access and RC
 	      initiated MMIO access
-  Required entries for MT7622:
+  Required entries for MT7622/MT7629:
    - axi_ckN :application layer MMIO channel operating clock
    - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when
 	      pcie_mac_ck/pcie_pipe_ck is turned off
@@ -47,10 +47,13 @@  Required properties for MT7623/MT2701:
 - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
   number of root ports.
 
-Required properties for MT2712/MT7622:
+Required properties for MT2712/MT7622/MT7629:
 -interrupts: A list of interrupt outputs of the controller, must have one
 	     entry for each PCIe port
 
+Required properties for MT7622/MT7629:
+- mediatek,pcie-subsys: Should be a phandle of the pciecfg node.
+
 In addition, the device tree node must have sub-nodes describing each
 PCIe port interface, having the following mandatory properties:
 
@@ -143,56 +146,73 @@  Examples for MT7623:
 
 Examples for MT2712:
 
-	pcie: pcie@11700000 {
+	pcie1: pcie@112ff000 {
 		compatible = "mediatek,mt2712-pcie";
 		device_type = "pci";
-		reg = <0 0x11700000 0 0x1000>,
-		      <0 0x112ff000 0 0x1000>;
-		reg-names = "port0", "port1";
+		reg = <0 0x112ff000 0 0x1000>;
+		reg-names = "port1";
 		#address-cells = <3>;
 		#size-cells = <2>;
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
-			 <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
-			 <&pericfg CLK_PERI_PCIE0>,
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
 			 <&pericfg CLK_PERI_PCIE1>;
-		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
-		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy0", "pcie-phy1";
+		clock-names = "sys_ck1", "ahb_ck1";
+		phys = <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy1";
 		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
+		ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
+		status = "disabled";
 
-		pcie0: pcie@0,0 {
-			reg = <0x0000 0 0 0 0>;
+		slot1: pcie@1,0 {
+			reg = <0x0800 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
 			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-					<0 0 0 2 &pcie_intc0 1>,
-					<0 0 0 3 &pcie_intc0 2>,
-					<0 0 0 4 &pcie_intc0 3>;
-			pcie_intc0: interrupt-controller {
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
 			};
 		};
+	};
 
-		pcie1: pcie@1,0 {
-			reg = <0x0800 0 0 0 0>;
+	pcie0: pcie@11700000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x11700000 0 0x1000>;
+		reg-names = "port0";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+			 <&pericfg CLK_PERI_PCIE0>;
+		clock-names = "sys_ck0", "ahb_ck0";
+		phys = <&u3port0 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+		status = "disabled";
+
+		slot0: pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
 			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-					<0 0 0 2 &pcie_intc1 1>,
-					<0 0 0 3 &pcie_intc1 2>,
-					<0 0 0 4 &pcie_intc1 3>;
-			pcie_intc1: interrupt-controller {
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			pcie_intc0: interrupt-controller {
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
@@ -202,39 +222,31 @@  Examples for MT2712:
 
 Examples for MT7622:
 
-	pcie: pcie@1a140000 {
+	pcie0: pcie@1a143000 {
 		compatible = "mediatek,mt7622-pcie";
 		device_type = "pci";
-		reg = <0 0x1a140000 0 0x1000>,
-		      <0 0x1a143000 0 0x1000>,
-		      <0 0x1a145000 0 0x1000>;
-		reg-names = "subsys", "port0", "port1";
+		reg = <0 0x1a143000 0 0x1000>;
+		reg-names = "port0";
+		mediatek,pcie-cfg = <&pciecfg>;
 		#address-cells = <3>;
 		#size-cells = <2>;
-		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
 		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
-			 <&pciesys CLK_PCIE_P1_MAC_EN>,
 			 <&pciesys CLK_PCIE_P0_AHB_EN>,
-			 <&pciesys CLK_PCIE_P1_AHB_EN>,
 			 <&pciesys CLK_PCIE_P0_AUX_EN>,
-			 <&pciesys CLK_PCIE_P1_AUX_EN>,
 			 <&pciesys CLK_PCIE_P0_AXI_EN>,
-			 <&pciesys CLK_PCIE_P1_AXI_EN>,
 			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
-			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
-			 <&pciesys CLK_PCIE_P0_PIPE_EN>,
-			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
-		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
-			      "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
-			      "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
-		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy0", "pcie-phy1";
+			 <&pciesys CLK_PCIE_P0_PIPE_EN>;
+		clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+			      "axi_ck0", "obff_ck0", "pipe_ck0";
+
 		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
 		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
+		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x8000000>;
+		status = "disabled";
 
-		pcie0: pcie@0,0 {
+		slot0: pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -251,8 +263,34 @@  Examples for MT7622:
 				#interrupt-cells = <1>;
 			};
 		};
+	};
+
+	pcie1: pcie@1a145000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a145000 0 0x1000>;
+		reg-names = "port1";
+		mediatek,pcie-cfg = <&pciecfg>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+			 /* designer has connect RC1 with p0_ahb clock */
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P1_AUX_EN>,
+			 <&pciesys CLK_PCIE_P1_AXI_EN>,
+			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+		clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+			      "axi_ck1", "obff_ck1", "pipe_ck1";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x0 0x28000000  0 0x8000000>;
+		status = "disabled";
 
-		pcie1: pcie@1,0 {
+		slot1: pcie@1,0 {
 			reg = <0x0800 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;