@@ -1173,6 +1173,18 @@ config MFD_SI476X_CORE
To compile this driver as a module, choose M here: the
module will be called si476x-core.
+config MFD_SIMPLE_MFD_I2C
+ tristate
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver creates a single register map with the intention for it
+ to be shared by all sub-devices.
+
+ Once the register map has been successfully initialised, any
+ sub-devices represented by child nodes in Device Tree will be
+ subsequently registered.
+
config MFD_SM501
tristate "Silicon Motion SM501"
depends on HAS_DMA
@@ -265,3 +265,4 @@ obj-$(CONFIG_MFD_STMFX) += stmfx.o
obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
+obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
new file mode 100644
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Simple MFD - I2C
+ *
+ * This driver creates a single register map with the intention for it to be
+ * shared by all sub-devices. Children can use their parent's device structure
+ * (dev.parent) in order to reference it.
+ *
+ * Once the register map has been successfully initialised, any sub-devices
+ * represented by child nodes in Device Tree will be subsequently registered.
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+
+static const struct regmap_config simple_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int simple_mfd_i2c_probe(struct i2c_client *i2c)
+{
+ const struct regmap_config *config;
+ struct regmap *regmap;
+
+ config = device_get_match_data(&i2c->dev);
+ if (!config)
+ config = &simple_regmap_config;
+
+ regmap = devm_regmap_init_i2c(i2c, config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ return devm_of_platform_populate(&i2c->dev);
+}
+
+static const struct of_device_id simple_mfd_i2c_of_match[] = {
+ {}
+};
+MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
+
+static struct i2c_driver simple_mfd_i2c_driver = {
+ .probe_new = simple_mfd_i2c_probe,
+ .driver = {
+ .name = "simple-mfd-i2c",
+ .of_match_table = simple_mfd_i2c_of_match,
+ },
+};
+module_i2c_driver(simple_mfd_i2c_driver);
+
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_DESCRIPTION("Simple MFD - I2C driver");
+MODULE_LICENSE("GPL v2");
There are I2C devices which contain several different functions but doesn't require any special access functions. For these kind of drivers an I2C regmap should be enough. Create an I2C driver which creates an I2C regmap and enumerates its children. If a device wants to use this as its MFD core driver, it has to add an individual compatible string. It may provide its own regmap configuration. Subdevices can use dev_get_regmap() on the parent to get their regmap instance. Signed-off-by: Michael Walle <michael@walle.cc> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> --- Changes since v9: - none Changes since v8: - fixed typo Changes since v7: - none Changes since v6: - added SIMPLE_MFD_I2C help text - revised description in module header Changes since v5: - removed "select MFD_CORE" in Kconfig - removed help text in Kconfig, we assume that the users of this driver will have a "select MFD_SIMPLE_MFD_I2C". Instead added a small description to the driver itself. - removed "struct simple_mfd_i2c_config" and use regmap_config directly - changed builtin_i2c_driver() to module_i2c_driver(), added MODULE_ boilerplate - cleaned up the included files Changes since v4: - new patch. Lee, please bear with me. I didn't want to delay the new version (where a lot of remarks on the other patches were addressed) even more, just because we haven't figured out how to deal with the MFD part. So for now, I've included this one. drivers/mfd/Kconfig | 12 ++++++++ drivers/mfd/Makefile | 1 + drivers/mfd/simple-mfd-i2c.c | 56 ++++++++++++++++++++++++++++++++++++ 3 files changed, 69 insertions(+) create mode 100644 drivers/mfd/simple-mfd-i2c.c