diff mbox series

[05/13] ARM: dts: imx7-mba7: remove unsupported PHY LED setup

Message ID 20200918112942.1367-5-matthias.schiffer@ew.tq-group.com (mailing list archive)
State New, archived
Headers show
Series [01/13] dt-bindings: arm: fsl: update TQ-Systems SoMs and boards based on i.MX7 | expand

Commit Message

Matthias Schiffer Sept. 18, 2020, 11:29 a.m. UTC
These properties were never supported by the DP83867, and a patch
implementing them was rejected in favor of a different solution. Remove
them.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
---
 arch/arm/boot/dts/imx7-mba7.dtsi | 4 ----
 arch/arm/boot/dts/imx7d-mba7.dts | 4 ----
 2 files changed, 8 deletions(-)

Comments

Shawn Guo Oct. 28, 2020, 7:40 a.m. UTC | #1
On Fri, Sep 18, 2020 at 01:29:34PM +0200, Matthias Schiffer wrote:
> These properties were never supported by the DP83867, and a patch
> implementing them was rejected in favor of a different solution. Remove
> them.
> 
> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
index d99912ade947..1af40032ab17 100644
--- a/arch/arm/boot/dts/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -212,10 +212,6 @@ 
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-			/* LED1: Link/Activity, LED2: Error */
-			ti,led-function = <0x0db0>;
-			/* Active low, LED1 and LED2 driven by phy */
-			ti,led-ctrl = <0x1001>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts
index 9f4f7112e598..1101be373ddf 100644
--- a/arch/arm/boot/dts/imx7d-mba7.dts
+++ b/arch/arm/boot/dts/imx7d-mba7.dts
@@ -39,10 +39,6 @@ 
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-			/* LED1: Link/Activity, LED2: error */
-			ti,led-function = <0x0db0>;
-			/* active low, LED1/2 driven by phy */
-			ti,led-ctrl = <0x1001>;
 		};
 	};
 };