deleted file mode 100644
@@ -1,19 +0,0 @@
-Hisilicon Hi6220 system controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-sysctrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, many clock registers are defined
- under this controller and this property must be present.
-
-Hisilicon designs this controller as one of the system controllers,
-its main functions are the same as Hisilicon system controller, but
-the register offset of some core modules are different.
-
-Example:
- /*for Hi6220*/
- sys_ctrl: sys_ctrl@f7030000 {
- compatible = "hisilicon,hi6220-sysctrl", "syscon";
- reg = <0x0 0xf7030000 0x0 0x2000>;
- #clock-cells = <1>;
- };
deleted file mode 100644
@@ -1,19 +0,0 @@
-Hisilicon HiP01 system controller
-
-Required properties:
-- compatible : "hisilicon,hip01-sysctrl"
-- reg : Register address and size
-
-The HiP01 system controller is mostly compatible with hisilicon
-system controller,but it has some specific control registers for
-HIP01 SoC family, such as slave core boot, and also some same
-registers located at different offset.
-
-Example:
-
- /* for hip01-ca9x2 */
- sysctrl: system-controller@10000000 {
- compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
- reg = <0x10000000 0x1000>;
- reboot-offset = <0x4>;
- };
deleted file mode 100644
@@ -1,25 +0,0 @@
-Hisilicon system controller
-
-Required properties:
-- compatible : "hisilicon,sysctrl"
-- reg : Register address and size
-
-Optional properties:
-- smp-offset : offset in sysctrl for notifying slave cpu booting
- cpu 1, reg;
- cpu 2, reg + 0x4;
- cpu 3, reg + 0x8;
- If reg value is not zero, cpun exit wfi and go
-- resume-offset : offset in sysctrl for notifying cpu0 when resume
-- reboot-offset : offset in sysctrl for system reboot
-
-Example:
-
- /* for Hi3620 */
- sysctrl: system-controller@fc802000 {
- compatible = "hisilicon,sysctrl";
- reg = <0xfc802000 0x1000>;
- smp-offset = <0x31c>;
- resume-offset = <0x308>;
- reboot-offset = <0x4>;
- };
new file mode 100644
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon system controller
+
+maintainers:
+ - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+ The Hisilicon system controller is used on many Hisilicon boards, it can be
+ used to assist the slave core startup, reboot the system, etc.
+
+ There are some variants of the Hisilicon system controller, such as HiP01,
+ Hi3519, Hi6220 system controller, each of them is mostly compatible with the
+ Hisilicon system controller, but some same registers located at different
+ offset. In addition, the HiP01 system controller has some specific control
+ registers for HIP01 SoC family, such as slave core boot.
+
+ The compatible names of each system controller are as follows:
+ Hisilicon system controller --> hisilicon,sysctrl
+ HiP01 system controller --> hisilicon,hip01-sysctrl
+ Hi6220 system controller --> hisilicon,hi6220-sysctrl
+ Hi3519 system controller --> hisilicon,hi3519-sysctrl
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: hisilicon,hi6220-sysctrl
+ then:
+ required:
+ - '#clock-cells'
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - hisilicon,sysctrl
+ - hisilicon,hi6220-sysctrl
+ - hisilicon,hi3519-sysctrl
+ - const: syscon
+ - items:
+ - const: hisilicon,hip01-sysctrl
+ - const: hisilicon,sysctrl
+
+ reg:
+ maxItems: 1
+
+ smp-offset:
+ description: |
+ offset in sysctrl for notifying slave cpu booting
+ cpu 1, reg;
+ cpu 2, reg + 0x4;
+ cpu 3, reg + 0x8;
+ If reg value is not zero, cpun exit wfi and go
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ resume-offset:
+ description: offset in sysctrl for notifying cpu0 when resume
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ reboot-offset:
+ description: offset in sysctrl for system reboot
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ /* Hisilicon system controller */
+ system-controller@fc802000 {
+ compatible = "hisilicon,sysctrl", "syscon";
+ reg = <0xfc802000 0x1000>;
+ smp-offset = <0x31c>;
+ resume-offset = <0x308>;
+ reboot-offset = <0x4>;
+ };
+
+ /* HiP01 system controller */
+ system-controller@10000000 {
+ compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+ reg = <0x10000000 0x1000>;
+ reboot-offset = <0x4>;
+ };
+
+ /* Hi6220 system controller */
+ system-controller@f7030000 {
+ compatible = "hisilicon,hi6220-sysctrl", "syscon";
+ reg = <0xf7030000 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ /* Hi3519 system controller */
+ system-controller@12010000 {
+ compatible = "hisilicon,hi3519-sysctrl", "syscon";
+ reg = <0x12010000 0x1000>;
+ };
+...
deleted file mode 100644
@@ -1,14 +0,0 @@
-* Hisilicon Hi3519 System Controller Block
-
-This bindings use the following binding:
-Documentation/devicetree/bindings/mfd/syscon.yaml
-
-Required properties:
-- compatible: "hisilicon,hi3519-sysctrl".
-- reg: the register region of this block
-
-Examples:
-sysctrl: system-controller@12010000 {
- compatible = "hisilicon,hi3519-sysctrl", "syscon";
- reg = <0x12010000 0x1000>;
-};
Convert the Hisilicon system controller and its variants binding to DT schema format using json-schema. All of them are grouped into one yaml file, to help users understand differences and avoid repeated descriptions. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> --- .../controller/hisilicon,hi6220-sysctrl.txt | 19 ---- .../controller/hisilicon,hip01-sysctrl.txt | 19 ---- .../arm/hisilicon/controller/hisilicon,sysctrl.txt | 25 ----- .../bindings/arm/hisilicon/controller/sysctrl.yaml | 110 +++++++++++++++++++++ .../bindings/arm/hisilicon/hi3519-sysctrl.txt | 14 --- 5 files changed, 110 insertions(+), 77 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sysctrl.txt delete mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip01-sysctrl.txt delete mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml delete mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt