diff mbox series

[v5,2/6] arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux

Message ID 20200930122032.23481-3-rogerq@ti.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: ti: Add USB support for J7200 EVM | expand

Commit Message

Roger Quadros Sept. 30, 2020, 12:20 p.m. UTC 
The SERDES lane control mux registers are present in the
CTRLMMR space.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 4a4fcd24f852..8997276158ca 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -18,6 +18,21 @@ 
 		};
 	};
 
+	scm_conf: scm-conf@100000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x00100000 0x00 0x1c000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00100000 0x1c000>;
+
+		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+					<0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
+		};
+	};
+
 	gic500: interrupt-controller@1800000 {
 		compatible = "arm,gic-v3";
 		#address-cells = <2>;