[v5,3/3] arm64: dts: sparx5: Add SGPIO devices

Message ID	20201008130515.2385825-4-lars.povlsen@microchip.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <SRS0=rjXQ=DP=lists.infradead.org=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@kernel.org> DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org AF9AD2083B IronPort-SDR: BlVI+T/EB+QJT1ri+BPLkAsP96g76h/u0OYlad3CoSidtvIwESruMsGlSXgmUlSFjkKDXmRS36 679GvGRPYiONoQGpkpsXd2gqVSxOX6W0NTW3ptuGlqu5znk0im+fO+uZOUNT3rEMtIF364xCK/ Yrtd1mWx+4mgll/0Bq0QhXA6mLx5ueXhpemPwskmkqyuGUwuXO9KVU4BKbR6Y6FQqb4KTSEhzg qTBsnfLA6sj2/fZh59beMHHPtpdEuMtVAJKpG9dMjpZFjJ3a9t+y+nEI4W6+B2X4UYmqA2Bu93 U9s= From: Lars Povlsen <lars.povlsen@microchip.com> To: Linus Walleij <linus.walleij@linaro.org> Subject: [PATCH v5 3/3] arm64: dts: sparx5: Add SGPIO devices Date: Thu, 8 Oct 2020 15:05:15 +0200 Message-ID: <20201008130515.2385825-4-lars.povlsen@microchip.com> In-Reply-To: <20201008130515.2385825-1-lars.povlsen@microchip.com> References: <20201008130515.2385825-1-lars.povlsen@microchip.com> MIME-Version: 1.0 summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [68.232.154.123 listed in list.dnswl.org] 0.0 RCVD_IN_MSPIKE_H3 RBL: Good reputation (+3) [68.232.154.123 listed in wl.mailspike.net] -0.0 SPF_PASS SPF: sender matches SPF record -0.0 SPF_HELO_PASS SPF: HELO matches SPF record -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.0 RCVD_IN_MSPIKE_WL Mailspike good senders Precedence: list Cc: devicetree@vger.kernel.org, Alexandre Belloni <alexandre.belloni@bootlin.com>, linux-kernel@vger.kernel.org, Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>, linux-gpio@vger.kernel.org, Lars Povlsen <lars.povlsen@microchip.com>, linux-arm-kernel@lists.infradead.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org
Series	pinctrl: Adding support for Microchip/Microsemi serial GPIO controller \| expand [v5,0/3] pinctrl: Adding support for Microchip/Microsemi serial GPIO controller [v5,1/3] dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver [v5,2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO [v5,3/3] arm64: dts: sparx5: Add SGPIO devices

diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi index 1def30e6b728..d64621d1213b 100644 --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi @@ -231,6 +231,22 @@ si2_pins: si2-pins { function = "si2"; }; + sgpio0_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3"; + function = "sg0"; + }; + + sgpio1_pins: sgpio1-pins { + pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13"; + function = "sg1"; + }; + + sgpio2_pins: sgpio2-pins { + pins = "GPIO_30", "GPIO_31", "GPIO_32", + "GPIO_33"; + function = "sg2"; + }; + uart_pins: uart-pins { pins = "GPIO_10", "GPIO_11"; function = "uart"; @@ -261,6 +277,81 @@ emmc_pins: emmc-pins { }; }; + sgpio0: gpio@61101036c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio0_pins>; + pinctrl-names = "default"; + reg = <0x6 0x1101036c 0x100>; + sgpio_in0: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out0: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + + sgpio1: gpio@611010484 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio1_pins>; + pinctrl-names = "default"; + reg = <0x6 0x11010484 0x100>; + sgpio_in1: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out1: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + + sgpio2: gpio@61101059c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio2_pins>; + pinctrl-names = "default"; + reg = <0x6 0x1101059c 0x100>; + sgpio_in2: gpio@0 { + reg = <0>; + compatible = "microchip,sparx5-sgpio-bank"; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out2: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + i2c0: i2c@600101000 { compatible = "snps,designware-i2c"; status = "disabled"; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts index 6b2da7c7520c..9baa085d7861 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts @@ -69,6 +69,11 @@ spi-flash@9 { }; }; +&sgpio0 { + status = "okay"; + microchip,sgpio-port-ranges = <0 23>; +}; + &i2c1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index 35984785d611..4f1512b0e871 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -36,6 +36,242 @@ gpio-restart { gpios = <&gpio 37 GPIO_ACTIVE_LOW>; priority = <200>; }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "twr0:green"; + gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>; + }; + led@1 { + label = "twr0:yellow"; + gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>; + }; + led@2 { + label = "twr1:green"; + gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>; + }; + led@3 { + label = "twr1:yellow"; + gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>; + }; + led@4 { + label = "twr2:green"; + gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>; + }; + led@5 { + label = "twr2:yellow"; + gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>; + }; + led@6 { + label = "twr3:green"; + gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>; + }; + led@7 { + label = "twr3:yellow"; + gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>; + }; + led@8 { + label = "eth12:green"; + gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@9 { + label = "eth12:yellow"; + gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@10 { + label = "eth13:green"; + gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@11 { + label = "eth13:yellow"; + gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@12 { + label = "eth14:green"; + gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@13 { + label = "eth14:yellow"; + gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@14 { + label = "eth15:green"; + gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@15 { + label = "eth15:yellow"; + gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@16 { + label = "eth48:green"; + gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@17 { + label = "eth48:yellow"; + gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@18 { + label = "eth49:green"; + gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@19 { + label = "eth49:yellow"; + gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@20 { + label = "eth50:green"; + gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@21 { + label = "eth50:yellow"; + gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@22 { + label = "eth51:green"; + gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@23 { + label = "eth51:yellow"; + gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@24 { + label = "eth52:green"; + gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@25 { + label = "eth52:yellow"; + gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@26 { + label = "eth53:green"; + gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@27 { + label = "eth53:yellow"; + gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@28 { + label = "eth54:green"; + gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@29 { + label = "eth54:yellow"; + gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@30 { + label = "eth55:green"; + gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@31 { + label = "eth55:yellow"; + gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@32 { + label = "eth56:green"; + gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@33 { + label = "eth56:yellow"; + gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@34 { + label = "eth57:green"; + gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@35 { + label = "eth57:yellow"; + gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@36 { + label = "eth58:green"; + gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@37 { + label = "eth58:yellow"; + gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@38 { + label = "eth59:green"; + gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@39 { + label = "eth59:yellow"; + gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@40 { + label = "eth60:green"; + gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@41 { + label = "eth60:yellow"; + gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@42 { + label = "eth61:green"; + gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@43 { + label = "eth61:yellow"; + gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@44 { + label = "eth62:green"; + gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@45 { + label = "eth62:yellow"; + gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@46 { + label = "eth63:green"; + gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@47 { + label = "eth63:yellow"; + gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &spi0 { @@ -54,6 +290,28 @@ spi-flash@9 { }; }; +&sgpio0 { + status = "okay"; + microchip,sgpio-port-ranges = <8 15>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + +&sgpio1 { + status = "okay"; + microchip,sgpio-port-ranges = <24 31>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &gpio { i2cmux_pins_i: i2cmux-pins-i { pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19", diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index 7de66806b14b..66381271bef9 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -20,6 +20,50 @@ gpio-restart { gpios = <&gpio 37 GPIO_ACTIVE_LOW>; priority = <200>; }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "eth60:yellow"; + gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@1 { + label = "eth60:green"; + gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@2 { + label = "eth61:yellow"; + gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@3 { + label = "eth61:green"; + gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@4 { + label = "eth62:yellow"; + gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@5 { + label = "eth62:green"; + gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@6 { + label = "eth63:yellow"; + gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@7 { + label = "eth63:green"; + gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; }; &gpio { @@ -67,6 +111,17 @@ spi-flash@9 { }; }; +&sgpio1 { + status = "okay"; + microchip,sgpio-port-ranges = <24 31>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &axi { i2c0_imux: i2c0-imux@0 { compatible = "i2c-mux-pinctrl";

[v5,3/3] arm64: dts: sparx5: Add SGPIO devices

Commit Message

Patch