diff mbox series

[v3,05/11] firmware: ti_sci: rm: Add support for extended_ch_type for tx channel

Message ID 20201012115119.11333-6-peter.ujfalusi@ti.com (mailing list archive)
State New, archived
Headers show
Series firmware/soc: ti_sci, ringacc/inta: Preparation for AM64 DMA support | expand

Commit Message

Peter Ujfalusi Oct. 12, 2020, 11:51 a.m. UTC 
Sysfw added 'extended_ch_type' to the tx_ch_cfg_req message which should be
used when BCDMA block copy channels are configured:
extended_ch_type = 0 : the channel is split tx channel (tchan)
extended_ch_type = 1 : the channel is block copy channel (bchan)

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/firmware/ti_sci.c              | 1 +
 drivers/firmware/ti_sci.h              | 6 ++++++
 include/linux/soc/ti/ti_sci_protocol.h | 5 +++++
 3 files changed, 12 insertions(+)
diff mbox series

Patch

diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 2793bb923881..0dd3fbb4f964 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -2365,6 +2365,7 @@  static int ti_sci_cmd_rm_udmap_tx_ch_cfg(const struct ti_sci_handle *handle,
 	req->tx_sched_priority = params->tx_sched_priority;
 	req->tx_burst_size = params->tx_burst_size;
 	req->tx_tdtype = params->tx_tdtype;
+	req->extended_ch_type = params->extended_ch_type;
 
 	ret = ti_sci_do_xfer(info, xfer);
 	if (ret) {
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
index 4d980eb592c4..ca15d8f1f8de 100644
--- a/drivers/firmware/ti_sci.h
+++ b/drivers/firmware/ti_sci.h
@@ -915,6 +915,7 @@  struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg {
  *   13 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::fdepth
  *   14 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_burst_size
  *   15 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_tdtype
+ *   16 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::extended_ch_type
  *
  * @nav_id: SoC device ID of Navigator Subsystem where tx channel is located
  *
@@ -983,6 +984,10 @@  struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg {
  * programmed into the tdtype field of the TCHAN_TCFG register:
  * 0 - Return immediately
  * 1 - Wait for completion message from remote peer
+ *
+ * @extended_ch_type: Valid for BCDMA.
+ * 0 - the channel is split tx channel (tchan)
+ * 1 - the channel is block copy channel (bchan)
  */
 struct ti_sci_msg_rm_udmap_tx_ch_cfg_req {
 	struct ti_sci_msg_hdr hdr;
@@ -1005,6 +1010,7 @@  struct ti_sci_msg_rm_udmap_tx_ch_cfg_req {
 	u8 tx_sched_priority;
 	u8 tx_burst_size;
 	u8 tx_tdtype;
+	u8 extended_ch_type;
 } __packed;
 
 /**
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
index 9699b260de59..6978afc00823 100644
--- a/include/linux/soc/ti/ti_sci_protocol.h
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -336,6 +336,9 @@  struct ti_sci_rm_psil_ops {
 #define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_128_BYTES	2
 #define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_256_BYTES	3
 
+#define TI_SCI_RM_BCDMA_EXTENDED_CH_TYPE_TCHAN		0
+#define TI_SCI_RM_BCDMA_EXTENDED_CH_TYPE_BCHAN		1
+
 /* UDMAP TX/RX channel valid_params common declarations */
 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PAUSE_ON_ERR_VALID		BIT(0)
 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID                BIT(1)
@@ -362,6 +365,7 @@  struct ti_sci_msg_rm_udmap_tx_ch_cfg {
 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_CREDIT_COUNT_VALID      BIT(12)
 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FDEPTH_VALID            BIT(13)
 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_TDTYPE_VALID            BIT(15)
+#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_EXTENDED_CH_TYPE_VALID	BIT(16)
 	u16 nav_id;
 	u16 index;
 	u8 tx_pause_on_err;
@@ -380,6 +384,7 @@  struct ti_sci_msg_rm_udmap_tx_ch_cfg {
 	u8 tx_sched_priority;
 	u8 tx_burst_size;
 	u8 tx_tdtype;
+	u8 extended_ch_type;
 };
 
 /**