Message ID | 20201017210324.556454-1-geomatsi@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | ARM: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy | expand |
Hi Sergey, On Sat, Oct 17, 2020 at 5:57 PM Sergey Matyukevich <geomatsi@gmail.com> wrote: > > Commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the > KSZ9031 PHY") fixed micrel phy driver adding proper support for phy > modes. Adapt imx6q-udoo board phy settings accordingly: explicitly > set required delay configuration using "rgmii-id". > > Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> I suppose this fixes a regression, correct? In this case, it would be nice to provide a Fixes tag, so that the fix can go to the stable tree. Thanks
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index c9e122865312..050642d7c582 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -98,7 +98,7 @@ sound { &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; };
Commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") fixed micrel phy driver adding proper support for phy modes. Adapt imx6q-udoo board phy settings accordingly: explicitly set required delay configuration using "rgmii-id". Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> --- arch/arm/boot/dts/imx6qdl-udoo.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)