[V2,10/13] usb: gadget: pxa27x_udc: Replace in_interrupt() usage in comments

Commit Message

Thomas Gleixner Oct. 19, 2020, 10:06 a.m. UTC

From: Ahmed S. Darwish <[e-mail]>

The usage of in_interrupt() in drivers is phased out for various reasons.

Documenting calling contexts of functions with 'in_interrupt()' or
'!in_interrupt()' is imprecise: For a function which might sleep the
condition is preemptible task context, which is not what '!in_interrupt()'
describes.

Replace the context docummentation with plain text and make them match
reality.

Signed-off-by: Ahmed S. Darwish <[e-mail]>
Signed-off-by: Sebastian Andrzej Siewior <[e-mail]>
Signed-off-by: Thomas Gleixner <[e-mail]>
Cc: Felipe Balbi <[e-mail]>
Cc: Greg Kroah-Hartman <[e-mail]>
Cc: [e-mail]
Cc: [e-mail]

---
 drivers/usb/gadget/udc/pxa27x_udc.c |   19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

Patch

--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -304,7 +304,7 @@  static struct pxa_ep *find_pxa_ep(struct
  * update_pxa_ep_matches - update pxa_ep cached values in all udc_usb_ep
  * @udc: pxa udc
  *
- * Context: in_interrupt()
+ * Context: interrupt handler
  *
  * Updates all pxa_ep fields in udc_usb_ep structures, if this field was
  * previously set up (and is not NULL). The update is necessary is a
@@ -859,7 +859,7 @@  static int write_packet(struct pxa_ep *e
  * @ep: pxa physical endpoint
  * @req: usb request
  *
- * Context: callable when in_interrupt()
+ * Context: interrupt handler
  *
  * Unload as many packets as possible from the fifo we use for usb OUT
  * transfers and put them into the request. Caller should have made sure
@@ -997,7 +997,7 @@  static int read_ep0_fifo(struct pxa_ep *
  * @ep: control endpoint
  * @req: request
  *
- * Context: callable when in_interrupt()
+ * Context: interrupt handler
  *
  * Sends a request (or a part of the request) to the control endpoint (ep0 in).
  * If the request doesn't fit, the remaining part will be sent from irq.
@@ -1036,8 +1036,8 @@  static int write_ep0_fifo(struct pxa_ep
  * @_req: usb request
  * @gfp_flags: flags
  *
- * Context: normally called when !in_interrupt, but callable when in_interrupt()
- * in the special case of ep0 setup :
+ * Context: thread context or from the interrupt handler in the
+ * special case of ep0 setup :
  *   (irq->handle_ep0_ctrl_req->gadget_setup->pxa_ep_queue)
  *
  * Returns 0 if succedeed, error otherwise
@@ -1512,7 +1512,8 @@  static int should_disable_udc(struct pxa
  * pxa_udc_pullup - Offer manual D+ pullup control
  * @_gadget: usb gadget using the control
  * @is_active: 0 if disconnect, else connect D+ pullup resistor
- * Context: !in_interrupt()
+ *
+ * Context: task context, might sleep
  *
  * Returns 0 if OK, -EOPNOTSUPP if udc driver doesn't handle D+ pullup
  */
@@ -1560,7 +1561,7 @@  static int pxa_udc_vbus_session(struct u
  * @_gadget: usb gadget
  * @mA: current drawn
  *
- * Context: !in_interrupt()
+ * Context: task context, might sleep
  *
  * Called after a configuration was chosen by a USB host, to inform how much
  * current can be drawn by the device from VBus line.
@@ -1886,7 +1887,7 @@  static void handle_ep0_ctrl_req(struct p
  * @fifo_irq: 1 if triggered by fifo service type irq
  * @opc_irq: 1 if triggered by output packet complete type irq
  *
- * Context : when in_interrupt() or with ep->lock held
+ * Context : interrupt handler
  *
  * Tries to transfer all pending request data into the endpoint and/or
  * transfer all pending data in the endpoint into usb requests.
@@ -2011,7 +2012,7 @@  static void handle_ep0(struct pxa_udc *u
  * Tries to transfer all pending request data into the endpoint and/or
  * transfer all pending data in the endpoint into usb requests.
  *
- * Is always called when in_interrupt() and with ep->lock released.
+ * Is always called from the interrupt handler. ep->lock must not be held.
  */
 static void handle_ep(struct pxa_ep *ep)
 {