| Message ID | 20201029122522.1917579-2-maxime@cerno.tech (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/2] drm/vc4: hdmi: Make sure our clock rate is within limits | expand |
Hi Maxime Thanks for the rewording :-) On Thu, 29 Oct 2020 at 12:25, Maxime Ripard <maxime@cerno.tech> wrote: > > The FIFO between the pixelvalve and the HDMI controller runs at 2 pixels > per clock cycle, and cannot deal with odd timings. > > Let's reject any mode with such timings. > > Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> > --- > > Changes from v1: > - s/broken/unsupported/ > --- > drivers/gpu/drm/vc4/vc4_hdmi.c | 12 ++++++++++++ > drivers/gpu/drm/vc4/vc4_hdmi.h | 3 +++ > 2 files changed, 15 insertions(+) > > diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c > index 3d0338822cd2..506c12454086 100644 > --- a/drivers/gpu/drm/vc4/vc4_hdmi.c > +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c > @@ -768,6 +768,11 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder, > struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); > unsigned long long pixel_rate = mode->clock * 1000; > > + if (vc4_hdmi->variant->unsupported_odd_h_timings && > + ((mode->hdisplay % 2) || (mode->hsync_start % 2) || > + (mode->hsync_end % 2) || (mode->htotal % 2))) > + return -EINVAL; > + > if (pixel_rate > vc4_hdmi->variant->max_pixel_clock) > return -EINVAL; > > @@ -780,6 +785,11 @@ vc4_hdmi_encoder_mode_valid(struct drm_encoder *encoder, > { > struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); > > + if (vc4_hdmi->variant->unsupported_odd_h_timings && > + ((mode->hdisplay % 2) || (mode->hsync_start % 2) || > + (mode->hsync_end % 2) || (mode->htotal % 2))) > + return MODE_H_ILLEGAL; > + > if ((mode->clock * 1000) > vc4_hdmi->variant->max_pixel_clock) > return MODE_CLOCK_HIGH; > > @@ -1830,6 +1840,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi0_variant = { > PHY_LANE_2, > PHY_LANE_CK, > }, > + .unsupported_odd_h_timings = true, > > .init_resources = vc5_hdmi_init_resources, > .csc_setup = vc5_hdmi_csc_setup, > @@ -1855,6 +1866,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi1_variant = { > PHY_LANE_CK, > PHY_LANE_2, > }, > + .unsupported_odd_h_timings = true, > > .init_resources = vc5_hdmi_init_resources, > .csc_setup = vc5_hdmi_csc_setup, > diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h > index 63c6f8bddf1d..6815e93b1a48 100644 > --- a/drivers/gpu/drm/vc4/vc4_hdmi.h > +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h > @@ -62,6 +62,9 @@ struct vc4_hdmi_variant { > */ > enum vc4_hdmi_phy_channel phy_lane_mapping[4]; > > + /* The BCM2711 cannot deal with odd horizontal pixel timings */ > + bool unsupported_odd_h_timings; > + > /* Callback to get the resources (memory region, interrupts, > * clocks, etc) for that variant. > */ > -- > 2.26.2 >
On Thu, Nov 19, 2020 at 11:14:50AM +0000, Dave Stevenson wrote: > Hi Maxime > > Thanks for the rewording :-) > > On Thu, 29 Oct 2020 at 12:25, Maxime Ripard <maxime@cerno.tech> wrote: > > > > The FIFO between the pixelvalve and the HDMI controller runs at 2 pixels > > per clock cycle, and cannot deal with odd timings. > > > > Let's reject any mode with such timings. > > > > Signed-off-by: Maxime Ripard <maxime@cerno.tech> > > Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Applied both patches, thanks! Maxime
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index 3d0338822cd2..506c12454086 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -768,6 +768,11 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder, struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); unsigned long long pixel_rate = mode->clock * 1000; + if (vc4_hdmi->variant->unsupported_odd_h_timings && + ((mode->hdisplay % 2) || (mode->hsync_start % 2) || + (mode->hsync_end % 2) || (mode->htotal % 2))) + return -EINVAL; + if (pixel_rate > vc4_hdmi->variant->max_pixel_clock) return -EINVAL; @@ -780,6 +785,11 @@ vc4_hdmi_encoder_mode_valid(struct drm_encoder *encoder, { struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); + if (vc4_hdmi->variant->unsupported_odd_h_timings && + ((mode->hdisplay % 2) || (mode->hsync_start % 2) || + (mode->hsync_end % 2) || (mode->htotal % 2))) + return MODE_H_ILLEGAL; + if ((mode->clock * 1000) > vc4_hdmi->variant->max_pixel_clock) return MODE_CLOCK_HIGH; @@ -1830,6 +1840,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi0_variant = { PHY_LANE_2, PHY_LANE_CK, }, + .unsupported_odd_h_timings = true, .init_resources = vc5_hdmi_init_resources, .csc_setup = vc5_hdmi_csc_setup, @@ -1855,6 +1866,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi1_variant = { PHY_LANE_CK, PHY_LANE_2, }, + .unsupported_odd_h_timings = true, .init_resources = vc5_hdmi_init_resources, .csc_setup = vc5_hdmi_csc_setup, diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h index 63c6f8bddf1d..6815e93b1a48 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.h +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h @@ -62,6 +62,9 @@ struct vc4_hdmi_variant { */ enum vc4_hdmi_phy_channel phy_lane_mapping[4]; + /* The BCM2711 cannot deal with odd horizontal pixel timings */ + bool unsupported_odd_h_timings; + /* Callback to get the resources (memory region, interrupts, * clocks, etc) for that variant. */
The FIFO between the pixelvalve and the HDMI controller runs at 2 pixels per clock cycle, and cannot deal with odd timings. Let's reject any mode with such timings. Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- Changes from v1: - s/broken/unsupported/ --- drivers/gpu/drm/vc4/vc4_hdmi.c | 12 ++++++++++++ drivers/gpu/drm/vc4/vc4_hdmi.h | 3 +++ 2 files changed, 15 insertions(+)