| Message ID | 20201106032055.51530-1-samuel@sholland.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: allwinner: pinephone: Use generic sensor node names | expand |
On Thu, Nov 05, 2020 at 09:20:55PM -0600, Samuel Holland wrote: > Instead of duplicating part of the compatible string in the node name, > use generic names as recommended by (and listed in) section 2.2.2 of the > Devicetree Specification. > > Suggested-by: Maxime Ripard <maxime@cerno.tech> > Signed-off-by: Samuel Holland <samuel@sholland.org> Applied, thanks! Maxime
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index 2da69450eec1..2dfe9bae8c67 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -161,7 +161,7 @@ &i2c1 { status = "okay"; /* Magnetometer */ - lis3mdl: lis3mdl@1e { + lis3mdl: magnetometer@1e { compatible = "st,lis3mdl-magn"; reg = <0x1e>; vdd-supply = <®_dldo1>; @@ -169,7 +169,7 @@ lis3mdl: lis3mdl@1e { }; /* Light/proximity sensor */ - stk3311@48 { + light-sensor@48 { compatible = "sensortek,stk3311"; reg = <0x48>; interrupt-parent = <&pio>; @@ -179,7 +179,7 @@ stk3311@48 { }; /* Accelerometer/gyroscope */ - mpu6050@68 { + accelerometer@68 { compatible = "invensense,mpu6050"; reg = <0x68>; interrupt-parent = <&pio>;
Instead of duplicating part of the compatible string in the node name, use generic names as recommended by (and listed in) section 2.2.2 of the Devicetree Specification. Suggested-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Samuel Holland <samuel@sholland.org> --- arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)