| Message ID | 20201106091854.14958-3-amelie.delaunay@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | STUSB1600 support on STM32MP15xx-DKx | expand |
On Fri, 06 Nov 2020 10:18:51 +0100, Amelie Delaunay wrote: > Add binding documentation for the STMicroelectronics STUSB160x Type-C port > controller. > > Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> > --- > .../devicetree/bindings/usb/st,stusb160x.yaml | 85 +++++++++++++++++++ > 1 file changed, 85 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/st,stusb160x.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/st,stusb160x.yaml: 'additionalProperties' is a required property /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/st,stusb160x.yaml: ignoring, error in schema: warning: no schema found in file: ./Documentation/devicetree/bindings/usb/st,stusb160x.yaml See https://patchwork.ozlabs.org/patch/1395559 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On 11/6/20 5:17 PM, Rob Herring wrote: > On Fri, 06 Nov 2020 10:18:51 +0100, Amelie Delaunay wrote: >> Add binding documentation for the STMicroelectronics STUSB160x Type-C port >> controller. >> >> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> >> --- >> .../devicetree/bindings/usb/st,stusb160x.yaml | 85 +++++++++++++++++++ >> 1 file changed, 85 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/usb/st,stusb160x.yaml >> > > > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/st,stusb160x.yaml: 'additionalProperties' is a required property > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/st,stusb160x.yaml: ignoring, error in schema: > warning: no schema found in file: ./Documentation/devicetree/bindings/usb/st,stusb160x.yaml > > > See https://patchwork.ozlabs.org/patch/1395559 > > The base for the patch is generally the last rc1. Any dependencies > should be noted. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit. > I already ran 'make dt_binding_check' but st-schema was not up to date, despite a not so old upgrade. I note for next time to do the upgrade autotically before the 'make dt_binding_check'. New version submitted. Thanks, Amelie
diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml new file mode 100644 index 000000000000..882450571db6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/st,stusb160x.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STUSB160x Type-C controller bindings + +maintainers: + - Amelie Delaunay <amelie.delaunay@st.com> + +properties: + compatible: + enum: + - st,stusb1600 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: main power supply (4.1V-22V) + + vsys-supply: + description: low power supply (3.0V-5.5V) + + vconn-supply: + description: power supply (2.7V-5.5V) used to supply VConn on CC pin in + source or dual power role + + connector: + type: object + + allOf: + - $ref: ../connector/usb-connector.yaml + + properties: + compatible: + const: usb-c-connector + + power-role: true + + typec-power-opmode: true + + required: + - compatible + +required: + - compatible + - reg + - connector + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + typec: stusb1600@28 { + compatible = "st,stusb1600"; + reg = <0x28>; + vdd-supply = <&vbus_drd>; + vsys-supply = <&vdd_usb>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + typec-power-opmode = "default"; + + port { + typec_con_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + }; +...
Add binding documentation for the STMicroelectronics STUSB160x Type-C port controller. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- .../devicetree/bindings/usb/st,stusb160x.yaml | 85 +++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/st,stusb160x.yaml