diff mbox series

[v2] thermal: sun8i: Use bitmap API instead of open code

Message ID 20201109114624.23035-1-frank@allwinnertech.com (mailing list archive)
State New, archived
Headers show
Series [v2] thermal: sun8i: Use bitmap API instead of open code | expand

Commit Message

Frank Lee Nov. 9, 2020, 11:46 a.m. UTC 
From: Yangtao Li <frank@allwinnertech.com>

The bitmap_* API is the standard way to access data in the bitfield.
So convert irq_ack to return an unsigned long, and make things to use
bitmap API.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
---
v2:
Make irq_ack to return an unsigned long
---
 drivers/thermal/sun8i_thermal.c | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

Comments

Maxime Ripard Nov. 10, 2020, 9:55 a.m. UTC | #1 
On Mon, Nov 09, 2020 at 07:46:24PM +0800, Frank Lee wrote:
> From: Yangtao Li <frank@allwinnertech.com>
> 
> The bitmap_* API is the standard way to access data in the bitfield.
> So convert irq_ack to return an unsigned long, and make things to use
> bitmap API.
> 
> Signed-off-by: Yangtao Li <frank@allwinnertech.com>

Acked-by: Maxime Ripard <mripard@kernel.org>

Thanks!
Maxime
Daniel Lezcano Nov. 12, 2020, 10:25 a.m. UTC | #2 
On 09/11/2020 12:46, Frank Lee wrote:
> From: Yangtao Li <frank@allwinnertech.com>
> 
> The bitmap_* API is the standard way to access data in the bitfield.
> So convert irq_ack to return an unsigned long, and make things to use
> bitmap API.
> 
> Signed-off-by: Yangtao Li <frank@allwinnertech.com>
> ---
> v2:
> Make irq_ack to return an unsigned long
> ---

Applied, thanks
diff mbox series

Patch

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index f8b13071a6f4..8c80bd06dd9f 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -8,6 +8,7 @@ 
  * Based on the work of Josef Gajdusek <atx@atx.name>
  */
 
+#include <linux/bitmap.h>
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
@@ -74,7 +75,7 @@  struct ths_thermal_chip {
 	int		(*calibrate)(struct ths_device *tmdev,
 				     u16 *caldata, int callen);
 	int		(*init)(struct ths_device *tmdev);
-	int             (*irq_ack)(struct ths_device *tmdev);
+	unsigned long	(*irq_ack)(struct ths_device *tmdev);
 	int		(*calc_temp)(struct ths_device *tmdev,
 				     int id, int reg);
 };
@@ -146,9 +147,10 @@  static const struct regmap_config config = {
 	.max_register = 0xfc,
 };
 
-static int sun8i_h3_irq_ack(struct ths_device *tmdev)
+static unsigned long sun8i_h3_irq_ack(struct ths_device *tmdev)
 {
-	int i, state, ret = 0;
+	unsigned long irq_bitmap = 0;
+	int i, state;
 
 	regmap_read(tmdev->regmap, SUN8I_THS_IS, &state);
 
@@ -156,16 +158,17 @@  static int sun8i_h3_irq_ack(struct ths_device *tmdev)
 		if (state & SUN8I_THS_DATA_IRQ_STS(i)) {
 			regmap_write(tmdev->regmap, SUN8I_THS_IS,
 				     SUN8I_THS_DATA_IRQ_STS(i));
-			ret |= BIT(i);
+			bitmap_set(&irq_bitmap, i, 1);
 		}
 	}
 
-	return ret;
+	return irq_bitmap;
 }
 
-static int sun50i_h6_irq_ack(struct ths_device *tmdev)
+static unsigned long sun50i_h6_irq_ack(struct ths_device *tmdev)
 {
-	int i, state, ret = 0;
+	unsigned long irq_bitmap = 0;
+	int i, state;
 
 	regmap_read(tmdev->regmap, SUN50I_H6_THS_DIS, &state);
 
@@ -173,24 +176,22 @@  static int sun50i_h6_irq_ack(struct ths_device *tmdev)
 		if (state & SUN50I_H6_THS_DATA_IRQ_STS(i)) {
 			regmap_write(tmdev->regmap, SUN50I_H6_THS_DIS,
 				     SUN50I_H6_THS_DATA_IRQ_STS(i));
-			ret |= BIT(i);
+			bitmap_set(&irq_bitmap, i, 1);
 		}
 	}
 
-	return ret;
+	return irq_bitmap;
 }
 
 static irqreturn_t sun8i_irq_thread(int irq, void *data)
 {
 	struct ths_device *tmdev = data;
-	int i, state;
-
-	state = tmdev->chip->irq_ack(tmdev);
+	unsigned long irq_bitmap = tmdev->chip->irq_ack(tmdev);
+	int i;
 
-	for (i = 0; i < tmdev->chip->sensor_num; i++) {
-		if (state & BIT(i))
-			thermal_zone_device_update(tmdev->sensor[i].tzd,
-						   THERMAL_EVENT_UNSPECIFIED);
+	for_each_set_bit(i, &irq_bitmap, tmdev->chip->sensor_num) {
+		thermal_zone_device_update(tmdev->sensor[i].tzd,
+					   THERMAL_EVENT_UNSPECIFIED);
 	}
 
 	return IRQ_HANDLED;