diff mbox series

[1/1] dt-bindings: phy: phy-stm32-usbphyc: convert bindings to json-schema

Message ID 20201110124326.4682-1-amelie.delaunay@st.com (mailing list archive)
State New, archived
Headers show
Series [1/1] dt-bindings: phy: phy-stm32-usbphyc: convert bindings to json-schema | expand

Commit Message

Amelie Delaunay Nov. 10, 2020, 12:43 p.m. UTC
Convert the STM32 USB PHY Controller (USBPHYC) bindings to DT schema format
using json-schema.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 .../bindings/phy/phy-stm32-usbphyc.txt        |  73 ----------
 .../bindings/phy/phy-stm32-usbphyc.yaml       | 136 ++++++++++++++++++
 2 files changed, 136 insertions(+), 73 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
 create mode 100644 Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml

Comments

Rob Herring Nov. 16, 2020, 5:06 p.m. UTC | #1
On Tue, Nov 10, 2020 at 01:43:26PM +0100, Amelie Delaunay wrote:
> Convert the STM32 USB PHY Controller (USBPHYC) bindings to DT schema format
> using json-schema.
> 
> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
> ---
>  .../bindings/phy/phy-stm32-usbphyc.txt        |  73 ----------
>  .../bindings/phy/phy-stm32-usbphyc.yaml       | 136 ++++++++++++++++++
>  2 files changed, 136 insertions(+), 73 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
> deleted file mode 100644
> index 725ae71ae653..000000000000
> --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
> +++ /dev/null
> @@ -1,73 +0,0 @@
> -STMicroelectronics STM32 USB HS PHY controller
> -
> -The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
> -switch. It controls PHY configuration and status, and the UTMI+ switch that
> -selects either OTG or HOST controller for the second PHY port. It also sets
> -PLL configuration.
> -
> -USBPHYC
> -      |_ PLL
> -      |
> -      |_ PHY port#1 _________________ HOST controller
> -      |                    _                 |
> -      |                  / 1|________________|
> -      |_ PHY port#2 ----|   |________________
> -      |                  \_0|                |
> -      |_ UTMI switch_______|          OTG controller
> -
> -
> -Phy provider node
> -=================
> -
> -Required properties:
> -- compatible: must be "st,stm32mp1-usbphyc"
> -- reg: address and length of the usb phy control register set
> -- clocks: phandle + clock specifier for the PLL phy clock
> -- #address-cells: number of address cells for phys sub-nodes, must be <1>
> -- #size-cells: number of size cells for phys sub-nodes, must be <0>
> -
> -Optional properties:
> -- assigned-clocks: phandle + clock specifier for the PLL phy clock
> -- assigned-clock-parents: the PLL phy clock parent
> -- resets: phandle + reset specifier
> -
> -Required nodes: one sub-node per port the controller provides.
> -
> -Phy sub-nodes
> -==============
> -
> -Required properties:
> -- reg: phy port index
> -- phy-supply: phandle to the regulator providing 3V3 power to the PHY,
> -	      see phy-bindings.txt in the same directory.
> -- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
> -- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
> -- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY
> -  port#1 and must be <1> for PHY port#2, to select USB controller
> -
> -
> -Example:
> -		usbphyc: usb-phy@5a006000 {
> -			compatible = "st,stm32mp1-usbphyc";
> -			reg = <0x5a006000 0x1000>;
> -			clocks = <&rcc_clk USBPHY_K>;
> -			resets = <&rcc_rst USBPHY_R>;
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -
> -			usbphyc_port0: usb-phy@0 {
> -				reg = <0>;
> -				phy-supply = <&vdd_usb>;
> -				vdda1v1-supply = <&reg11>;
> -				vdda1v8-supply = <&reg18>
> -				#phy-cells = <0>;
> -			};
> -
> -			usbphyc_port1: usb-phy@1 {
> -				reg = <1>;
> -				phy-supply = <&vdd_usb>;
> -				vdda1v1-supply = <&reg11>;
> -				vdda1v8-supply = <&reg18>
> -				#phy-cells = <1>;
> -			};
> -		};
> diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
> new file mode 100644
> index 000000000000..09064bbb68dc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
> @@ -0,0 +1,136 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/phy-stm32-usbphyc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 USB HS PHY controller binding
> +
> +description:
> +
> +  The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
> +  switch. It controls PHY configuration and status, and the UTMI+ switch that
> +  selects either OTG or HOST controller for the second PHY port. It also sets
> +  PLL configuration.
> +
> +  USBPHYC
> +  |_ PLL
> +  |
> +  |_ PHY port#1 _________________ HOST controller
> +  |                   __                 |
> +  |                  / 1|________________|
> +  |_ PHY port#2 ----|   |________________
> +  |                  \_0|                |
> +  |_ UTMI switch_______|          OTG controller
> +
> +maintainers:
> +  - Amelie Delaunay <amelie.delaunay@st.com>
> +
> +properties:
> +  compatible:
> +    const: st,stm32mp1-usbphyc
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +#Required child nodes:
> +
> +patternProperties:
> +  "^usb-phy@[0|1]$":
> +    type: object
> +    description:
> +      Each port the controller provides must be represented as a sub-node.
> +
> +    properties:
> +      reg:
> +        description: phy port index.
> +        maxItems: 1
> +
> +      phy-supply:
> +        description: regulator providing 3V3 power supply to the PHY.
> +
> +      vdda1v1-supply:
> +        description: regulator providing 1V1 power supply to the PLL block
> +
> +      vdda1v8-supply:
> +        description: regulator providing 1V8 power supply to the PLL block
> +
> +      "#phy-cells":
> +        enum: [ 0x0, 0x1 ]
> +
> +    allOf:
> +      - if:
> +          properties:
> +            reg:
> +              const: 0
> +        then:
> +          properties:
> +            "#phy-cells":
> +              const: 0
> +        else:
> +          properties:
> +            "#phy-cells":
> +              const: 1
> +              description:
> +                The value is used to select UTMI switch output.
> +                0 for OTG controller and 1 for Host controller.
> +
> +    required:
> +      - reg
> +      - phy-supply
> +      - vdda1v1-supply
> +      - vdda1v8-supply
> +      - "#phy-cells"

       additionalProperties: false

With that,

Reviewed-by: Rob Herring <robh@kernel.org>

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - "#address-cells"
> +  - "#size-cells"
> +  - usb-phy@0
> +  - usb-phy@1
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/stm32mp1-clks.h>
> +    #include <dt-bindings/reset/stm32mp1-resets.h>
> +    usbphyc: usbphyc@5a006000 {
> +        compatible = "st,stm32mp1-usbphyc";
> +        reg = <0x5a006000 0x1000>;
> +        clocks = <&rcc USBPHY_K>;
> +        resets = <&rcc USBPHY_R>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        usbphyc_port0: usb-phy@0 {
> +            reg = <0>;
> +            phy-supply = <&vdd_usb>;
> +            vdda1v1-supply = <&reg11>;
> +            vdda1v8-supply = <&reg18>;
> +            #phy-cells = <0>;
> +        };
> +
> +        usbphyc_port1: usb-phy@1 {
> +            reg = <1>;
> +            phy-supply = <&vdd_usb>;
> +            vdda1v1-supply = <&reg11>;
> +            vdda1v8-supply = <&reg18>;
> +            #phy-cells = <1>;
> +        };
> +    };
> +...
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
deleted file mode 100644
index 725ae71ae653..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
+++ /dev/null
@@ -1,73 +0,0 @@ 
-STMicroelectronics STM32 USB HS PHY controller
-
-The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
-switch. It controls PHY configuration and status, and the UTMI+ switch that
-selects either OTG or HOST controller for the second PHY port. It also sets
-PLL configuration.
-
-USBPHYC
-      |_ PLL
-      |
-      |_ PHY port#1 _________________ HOST controller
-      |                    _                 |
-      |                  / 1|________________|
-      |_ PHY port#2 ----|   |________________
-      |                  \_0|                |
-      |_ UTMI switch_______|          OTG controller
-
-
-Phy provider node
-=================
-
-Required properties:
-- compatible: must be "st,stm32mp1-usbphyc"
-- reg: address and length of the usb phy control register set
-- clocks: phandle + clock specifier for the PLL phy clock
-- #address-cells: number of address cells for phys sub-nodes, must be <1>
-- #size-cells: number of size cells for phys sub-nodes, must be <0>
-
-Optional properties:
-- assigned-clocks: phandle + clock specifier for the PLL phy clock
-- assigned-clock-parents: the PLL phy clock parent
-- resets: phandle + reset specifier
-
-Required nodes: one sub-node per port the controller provides.
-
-Phy sub-nodes
-==============
-
-Required properties:
-- reg: phy port index
-- phy-supply: phandle to the regulator providing 3V3 power to the PHY,
-	      see phy-bindings.txt in the same directory.
-- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
-- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY
-  port#1 and must be <1> for PHY port#2, to select USB controller
-
-
-Example:
-		usbphyc: usb-phy@5a006000 {
-			compatible = "st,stm32mp1-usbphyc";
-			reg = <0x5a006000 0x1000>;
-			clocks = <&rcc_clk USBPHY_K>;
-			resets = <&rcc_rst USBPHY_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			usbphyc_port0: usb-phy@0 {
-				reg = <0>;
-				phy-supply = <&vdd_usb>;
-				vdda1v1-supply = <&reg11>;
-				vdda1v8-supply = <&reg18>
-				#phy-cells = <0>;
-			};
-
-			usbphyc_port1: usb-phy@1 {
-				reg = <1>;
-				phy-supply = <&vdd_usb>;
-				vdda1v1-supply = <&reg11>;
-				vdda1v8-supply = <&reg18>
-				#phy-cells = <1>;
-			};
-		};
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
new file mode 100644
index 000000000000..09064bbb68dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -0,0 +1,136 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-stm32-usbphyc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 USB HS PHY controller binding
+
+description:
+
+  The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
+  switch. It controls PHY configuration and status, and the UTMI+ switch that
+  selects either OTG or HOST controller for the second PHY port. It also sets
+  PLL configuration.
+
+  USBPHYC
+  |_ PLL
+  |
+  |_ PHY port#1 _________________ HOST controller
+  |                   __                 |
+  |                  / 1|________________|
+  |_ PHY port#2 ----|   |________________
+  |                  \_0|                |
+  |_ UTMI switch_______|          OTG controller
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1-usbphyc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+#Required child nodes:
+
+patternProperties:
+  "^usb-phy@[0|1]$":
+    type: object
+    description:
+      Each port the controller provides must be represented as a sub-node.
+
+    properties:
+      reg:
+        description: phy port index.
+        maxItems: 1
+
+      phy-supply:
+        description: regulator providing 3V3 power supply to the PHY.
+
+      vdda1v1-supply:
+        description: regulator providing 1V1 power supply to the PLL block
+
+      vdda1v8-supply:
+        description: regulator providing 1V8 power supply to the PLL block
+
+      "#phy-cells":
+        enum: [ 0x0, 0x1 ]
+
+    allOf:
+      - if:
+          properties:
+            reg:
+              const: 0
+        then:
+          properties:
+            "#phy-cells":
+              const: 0
+        else:
+          properties:
+            "#phy-cells":
+              const: 1
+              description:
+                The value is used to select UTMI switch output.
+                0 for OTG controller and 1 for Host controller.
+
+    required:
+      - reg
+      - phy-supply
+      - vdda1v1-supply
+      - vdda1v8-supply
+      - "#phy-cells"
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - usb-phy@0
+  - usb-phy@1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    usbphyc: usbphyc@5a006000 {
+        compatible = "st,stm32mp1-usbphyc";
+        reg = <0x5a006000 0x1000>;
+        clocks = <&rcc USBPHY_K>;
+        resets = <&rcc USBPHY_R>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usbphyc_port0: usb-phy@0 {
+            reg = <0>;
+            phy-supply = <&vdd_usb>;
+            vdda1v1-supply = <&reg11>;
+            vdda1v8-supply = <&reg18>;
+            #phy-cells = <0>;
+        };
+
+        usbphyc_port1: usb-phy@1 {
+            reg = <1>;
+            phy-supply = <&vdd_usb>;
+            vdda1v1-supply = <&reg11>;
+            vdda1v8-supply = <&reg18>;
+            #phy-cells = <1>;
+        };
+    };
+...