diff mbox series

[net,v2,2/4] ARM: dts: imx: Change flexcan node name to "can"

Message ID 20201111130507.1560881-3-mkl@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series [net,v2,1/4] ARM: dts: imx: fix can fsl,stop-mode | expand

Commit Message

Marc Kleine-Budde Nov. 11, 2020, 1:05 p.m. UTC 
Change i.MX SoCs nand node name from "flexcan" to "can" to be compliant with
yaml schema, it requires the nodename to be "can". This fixes the following
error found by dtbs_check:

arch/arm/boot/dts/imx6dl-apf6dev.dt.yaml: flexcan@2090000: $nodename:0: 'flexcan@2090000' does not match '^can(@.*)?$'
    From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 4 ++--
 arch/arm/boot/dts/imx6ul.dtsi  | 4 ++--
 arch/arm/boot/dts/vfxxx.dtsi   | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

Comments

Shawn Guo Nov. 16, 2020, 8:24 a.m. UTC | #1 
On Wed, Nov 11, 2020 at 02:05:05PM +0100, Marc Kleine-Budde wrote:
> Change i.MX SoCs nand node name from "flexcan" to "can" to be compliant with
> yaml schema, it requires the nodename to be "can". This fixes the following
> error found by dtbs_check:
> 
> arch/arm/boot/dts/imx6dl-apf6dev.dt.yaml: flexcan@2090000: $nodename:0: 'flexcan@2090000' does not match '^can(@.*)?$'
>     From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> 
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index bc98b63922b0..7a1d39b58c8b 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -542,7 +542,7 @@  pwm4: pwm@208c000 {
 				status = "disabled";
 			};
 
-			can1: flexcan@2090000 {
+			can1: can@2090000 {
 				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02090000 0x4000>;
 				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -553,7 +553,7 @@  can1: flexcan@2090000 {
 				status = "disabled";
 			};
 
-			can2: flexcan@2094000 {
+			can2: can@2094000 {
 				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02094000 0x4000>;
 				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 713a4bb341db..798a1c2a539e 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -423,7 +423,7 @@  pwm4: pwm@208c000 {
 				status = "disabled";
 			};
 
-			can1: flexcan@2090000 {
+			can1: can@2090000 {
 				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
 				reg = <0x02090000 0x4000>;
 				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -434,7 +434,7 @@  can1: flexcan@2090000 {
 				status = "disabled";
 			};
 
-			can2: flexcan@2094000 {
+			can2: can@2094000 {
 				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
 				reg = <0x02094000 0x4000>;
 				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 2259d11af721..acb1a9040e56 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -95,7 +95,7 @@  edma0: dma-controller@40018000 {
 				status = "disabled";
 			};
 
-			can0: flexcan@40020000 {
+			can0: can@40020000 {
 				compatible = "fsl,vf610-flexcan";
 				reg = <0x40020000 0x4000>;
 				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
@@ -681,7 +681,7 @@  fec1: ethernet@400d1000 {
 				status = "disabled";
 			};
 
-			can1: flexcan@400d4000 {
+			can1: can@400d4000 {
 				compatible = "fsl,vf610-flexcan";
 				reg = <0x400d4000 0x4000>;
 				interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;