| Message ID | 20201112045020.9766-10-f.fainelli@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,01/10] dt-bindings: net: dsa: Extend switch nodes pattern | expand |
On Wed, Nov 11, 2020 at 08:50:19PM -0800, Florian Fainelli wrote: > Provide an empty 'ports' container node with the correct #address-cells > and #size-cells properties. This silences the following warning: > > arch/arm/boot/dts/bcm958522er.dt.yaml: > ethernet-switch@36000: 'oneOf' conditional failed, one must be fixed: > 'ports' is a required property > 'ethernet-ports' is a required property > From schema: > Documentation/devicetree/bindings/net/dsa/b53.yaml > > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > --- So 'ports' is not going away and getting bulk-replaced with 'ethernet-ports'. Good. Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 09fd7e55c069..b4d2cc70afb1 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -420,6 +420,10 @@ srab: ethernet-switch@36000 { status = "disabled"; /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; }; i2c0: i2c@38000 { diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index a49c2fd21f4a..83cb877d63db 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -176,9 +176,6 @@ &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index dd6dff6452b8..4e106ce1384a 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -180,9 +180,6 @@ &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index a71371b4065e..cda6cc281e18 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -195,9 +195,6 @@ &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 7782b61c51a1..ffbff0014c65 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -216,9 +216,6 @@ &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index edd0f630e025..3fd39c479a3c 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -184,9 +184,6 @@ &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>;
Provide an empty 'ports' container node with the correct #address-cells and #size-cells properties. This silences the following warning: arch/arm/boot/dts/bcm958522er.dt.yaml: ethernet-switch@36000: 'oneOf' conditional failed, one must be fixed: 'ports' is a required property 'ethernet-ports' is a required property From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- arch/arm/boot/dts/bcm-nsp.dtsi | 4 ++++ arch/arm/boot/dts/bcm958622hr.dts | 3 --- arch/arm/boot/dts/bcm958623hr.dts | 3 --- arch/arm/boot/dts/bcm958625hr.dts | 3 --- arch/arm/boot/dts/bcm958625k.dts | 3 --- arch/arm/boot/dts/bcm988312hr.dts | 3 --- 6 files changed, 4 insertions(+), 15 deletions(-)